[FFmpeg-devel] [PATCH 6/6] CrystalHD: Improve detection of h.264 content.
Philip Langdale
philipl at overt.org
Tue Apr 5 05:51:51 CEST 2011
As previously discussed, the CrystalHD hardware returns exceptionally
useless information about interlaced h.264 content - to the extent
that it's not possible to distinguish most MBAFF and PAFF content until
it's too late.
In an attempt to compensate for this, I'm introducing two mechanisms:
1) Peeking at the picture number of the next picture
The hardware provides a capability to peek the next picture number. If
it is the same as the current picture number, then we are clearly dealing
with two fields and not a frame or fieldpair.
If this always worked, it would be all we need, but it's not guaranteed
to work. Sometimes, the next picture may not be decoded sufficiently
for the number to be known; alternately, a corruption in the stream may
cause the hardware to refuse to return the number even if the next
intact frame is decoded. In either case, the query will return 0.
If we are unable to peek the next picture number, we assume that the
picture is a frame/fieldpair and return it accordingly. If that turns
out to be incorrect, we discard the second field, and the user has
to live with the glitch. In testing, false detection can occur for
the first couple of seconds, and then the pipeline stabalizes and
we get correct detection.
2) Use the h264_parser to detect when individual input fields have
been combined into an output fieldpair.
I have multiple PAFF samples where this behaviour is detected. The
peeking mechanism described above will correctly detect that the
output is a fieldpair, but we need to know what the input type was
to ensure pipeline stability (only return one output frame per input
frame).
If we find ourselves with an output fieldpair, yet the input picture
type was a field, as reported by the parser, then we are dealing with
this case, and can make sure not to return anything on the next
decode() call.
Taken together, these allow us to remove the hard-coded hacks for
different h.264 types, and we can clearly describe the conditions
under which we can trust the hardware's claim that content is
interlaced.
Signed-off-by: Philip Langdale <philipl at overt.org>
---
libavcodec/crystalhd.c | 97 +++++++++++++++++++++++++++++-------------------
1 files changed, 59 insertions(+), 38 deletions(-)
diff --git a/libavcodec/crystalhd.c b/libavcodec/crystalhd.c
index 6c9a599..5404a63 100644
--- a/libavcodec/crystalhd.c
+++ b/libavcodec/crystalhd.c
@@ -504,32 +504,13 @@ static av_cold int init(AVCodecContext *avctx)
}
-/*
- * The CrystalHD doesn't report interlaced H.264 content in a way that allows
- * us to distinguish between specific cases that require different handling.
- * So, for now, we have to hard-code the behaviour we want.
- *
- * The default behaviour is to assume MBAFF with input and output fieldpairs.
- *
- * Define ASSUME_PAFF_OVER_MBAFF to treat input as PAFF with separate input
- * and output fields.
- *
- * Define ASSUME_TWO_INPUTS_ONE_OUTPUT to treat input as separate fields but
- * output as a single fieldpair.
- *
- * Define both to mess up your playback.
- */
-#define ASSUME_PAFF_OVER_MBAFF 0
-#define ASSUME_TWO_INPUTS_ONE_OUTPUT 0
static inline CopyRet copy_frame(AVCodecContext *avctx,
BC_DTS_PROC_OUT *output,
- void *data, int *data_size,
- uint8_t second_field)
+ void *data, int *data_size)
{
BC_STATUS ret;
BC_DTS_STATUS decoder_status;
- uint8_t is_paff;
- uint8_t next_frame_same;
+ uint8_t trust_interlaced;
uint8_t interlaced;
CHDContext *priv = avctx->priv_data;
@@ -578,17 +559,51 @@ static inline CopyRet copy_frame(AVCodecContext *avctx,
return RET_ERROR;
}
- is_paff = ASSUME_PAFF_OVER_MBAFF ||
- !(output->PicInfo.flags & VDEC_FLAG_UNKNOWN_SRC);
- next_frame_same = output->PicInfo.picture_number ==
- (decoder_status.picNumFlags & ~0x40000000);
- interlaced = ((output->PicInfo.flags &
- VDEC_FLAG_INTERLACED_SRC) && is_paff) ||
- next_frame_same || bottom_field || second_field;
+ /*
+ * For most content, we can trust the interlaced flag returned
+ * by the hardware, but sometimes we can't. These are the
+ * conditions under which we can trust the flag:
+ *
+ * 1) It's not h.264 content
+ * 2) The UNKNOWN_SRC flag is not set
+ * 3) We know we're expecting a second field
+ * 4) The hardware reports this picture and the next picture
+ * have the same picture number.
+ *
+ * Note that there can still be interlaced content that will
+ * fail this check, if the hardware hasn't decoded the next
+ * picture or if there is a corruption in the stream. (In either
+ * case a 0 will be returned for the next picture number)
+ */
+ trust_interlaced = avctx->codec->id != CODEC_ID_H264 ||
+ !(output->PicInfo.flags & VDEC_FLAG_UNKNOWN_SRC) ||
+ priv->need_second_field ||
+ (decoder_status.picNumFlags & ~0x40000000) ==
+ output->PicInfo.picture_number;
+
+ /*
+ * If we got a false negative for trust_interlaced on the first field,
+ * we will realise our mistake here when we see that the picture number is that
+ * of the previous picture. We cannot recover the frame and should discard the
+ * second field to keep the correct number of output frames.
+ */
+ if (output->PicInfo.picture_number == priv->last_picture && !priv->need_second_field) {
+ av_log(avctx, AV_LOG_WARNING,
+ "Incorrectly guessed progressive frame. Discarding second field\n");
+ /* Returning without providing a picture. */
+ return RET_OK;
+ }
+
+ interlaced = (output->PicInfo.flags & VDEC_FLAG_INTERLACED_SRC) &&
+ trust_interlaced;
- av_log(avctx, AV_LOG_VERBOSE, "CrystalHD: next_frame_same: %u | %u | %u\n",
- next_frame_same, output->PicInfo.picture_number,
- decoder_status.picNumFlags & ~0x40000000);
+ if (!trust_interlaced && (decoder_status.picNumFlags & ~0x40000000) == 0) {
+ av_log(avctx, AV_LOG_VERBOSE,
+ "Next picture number unknown. Assuming progressive frame.\n");
+ }
+
+ av_log(avctx, AV_LOG_VERBOSE, "Interlaced state: %d | trust_interlaced %d\n",
+ interlaced, trust_interlaced);
if (priv->pic.data[0] && !priv->need_second_field)
avctx->release_buffer(avctx, &priv->pic);
@@ -656,8 +671,15 @@ static inline CopyRet copy_frame(AVCodecContext *avctx,
*(AVFrame *)data = priv->pic;
}
- if (ASSUME_TWO_INPUTS_ONE_OUTPUT &&
- output->PicInfo.flags & VDEC_FLAG_UNKNOWN_SRC) {
+ /*
+ * Two types of PAFF content have been observed. One form causes the
+ * hardware to return a field pair and the other individual fields,
+ * even though the input is always individual fields. We must skip
+ * copying on the next decode() call to maintain pipeline length in
+ * the first case.
+ */
+ if (!interlaced && (output->PicInfo.flags & VDEC_FLAG_UNKNOWN_SRC) &&
+ (pic_type == PICT_TOP_FIELD || pic_type == PICT_BOTTOM_FIELD)) {
av_log(priv->avctx, AV_LOG_VERBOSE, "Fieldpair from two packets.\n");
return RET_SKIP_NEXT_COPY;
}
@@ -673,8 +695,7 @@ static inline CopyRet copy_frame(AVCodecContext *avctx,
static inline CopyRet receive_frame(AVCodecContext *avctx,
- void *data, int *data_size,
- uint8_t second_field)
+ void *data, int *data_size)
{
BC_STATUS ret;
BC_DTS_PROC_OUT output = {
@@ -731,7 +752,7 @@ static inline CopyRet receive_frame(AVCodecContext *avctx,
priv->last_picture = output.PicInfo.picture_number - 1;
}
- copy_ret = copy_frame(avctx, &output, data, data_size, second_field);
+ copy_ret = copy_frame(avctx, &output, data, data_size);
if (*data_size > 0) {
avctx->has_b_frames--;
priv->last_picture++;
@@ -865,7 +886,7 @@ static int decode(AVCodecContext *avctx, void *data, int *data_size, AVPacket *a
}
do {
- rec_ret = receive_frame(avctx, data, data_size, 0);
+ rec_ret = receive_frame(avctx, data, data_size);
if (rec_ret == RET_OK && *data_size == 0) {
/*
* This case is for when the encoded fields are stored
@@ -891,7 +912,7 @@ static int decode(AVCodecContext *avctx, void *data, int *data_size, AVPacket *a
ret = DtsGetDriverStatus(dev, &decoder_status);
if (ret == BC_STS_SUCCESS &&
decoder_status.ReadyListCount > 0) {
- rec_ret = receive_frame(avctx, data, data_size, 1);
+ rec_ret = receive_frame(avctx, data, data_size);
if ((rec_ret == RET_OK && *data_size > 0) ||
rec_ret == RET_ERROR)
break;
--
1.7.4.1
More information about the ffmpeg-devel
mailing list