[FFmpeg-devel] [PATCH] lavfi/smartblur: add support to named options
Stefano Sabatini
stefasab at gmail.com
Sun Mar 10 16:40:08 CET 2013
On date Sunday 2013-03-10 13:27:27 +0100, Clément Bœsch encoded:
> On Sun, Mar 10, 2013 at 01:13:37PM +0100, Stefano Sabatini wrote:
> > TODO: bump micro
> > ---
> > doc/filters.texi | 52 ++++++++++++++++-----------
> > libavfilter/vf_smartblur.c | 85 +++++++++++++++++++++-----------------------
> > 2 files changed, 72 insertions(+), 65 deletions(-)
> >
> > diff --git a/doc/filters.texi b/doc/filters.texi
> > index 3febd2e..48b93f5 100644
> > --- a/doc/filters.texi
> > +++ b/doc/filters.texi
> > @@ -4925,30 +4925,40 @@ expressed in the form "[@var{c0} @var{c1} @var{c2} @var{c3}]"
> >
> > Blur the input video without impacting the outlines.
> >
> > -The filter accepts the following parameters:
> > - at var{luma_radius}:@var{luma_strength}:@var{luma_threshold}[:@var{chroma_radius}:@var{chroma_strength}:@var{chroma_threshold}]
> > -
> > -Parameters prefixed by @var{luma} indicate that they work on the
> > -luminance of the pixels whereas parameters prefixed by @var{chroma}
> > -refer to the chrominance of the pixels.
> > -
> > -If the chroma parameters are not set, the luma parameters are used for
> > -either the luminance and the chrominance of the pixels.
> > +This filter accepts parameters as a list of @var{key}=@var{value} pairs,
> > +separated by ":".
> >
> > - at var{luma_radius} or @var{chroma_radius} must be a float number in the
> > -range [0.1,5.0] that specifies the variance of the gaussian filter
> > -used to blur the image (slower if larger).
> > +If the key of the first options is omitted, the arguments are
> > +interpreted according to the syntax:
> > + at var{luma_radius}:@var{luma_strength}:@var{luma_threshold}[:@var{chroma_radius}:@var{chroma_strength}:@var{chroma_threshold}]
> >
> > - at var{luma_strength} or @var{chroma_strength} must be a float number in
> > -the range [-1.0,1.0] that configures the blurring. A value included in
> > -[0.0,1.0] will blur the image whereas a value included in [-1.0,0.0]
> > -will sharpen the image.
> > +A description of the accepted options follows.
> >
> > - at var{luma_threshold} or @var{chroma_threshold} must be an integer in
> > -the range [-30,30] that is used as a coefficient to determine whether
> > -a pixel should be blurred or not. A value of 0 will filter all the
> > -image, a value included in [0,30] will filter flat areas and a value
> > -included in [-30,0] will filter edges.
> > + at table @option
> > + at item luma_radius, lr
> > + at item chroma_radius, cr
> > +Set the luma/chroma radius. The option value must be a float number in
> > +the range [0.1,5.0] that specifies the variance of the gaussian filter
> > +used to blur the image (slower if larger). Default value is 1.0.
> > +
> > + at item luma_strength, ls
> > + at item chroma_strength, cs
> > +Set the luma/chroma strength. The option value must be a float number
> > +in the range [-1.0,1.0] that configures the blurring. A value included
> > +in [0.0,1.0] will blur the image whereas a value included in
> > +[-1.0,0.0] will sharpen the image. Default value is 1.0.
> > +
> > + at item luma_threshold, lt
> > + at item chroma_threshold, ct
> > +Set the luma/chroma threshold used as a coefficient to determine
> > +whether a pixel should be blurred or not. The option value must be an
> > +integer in the range [-30,30]. A value of 0 will filter all the image,
> > +a value included in [0,30] will filter flat areas and a value included
> > +in [-30,0] will filter edges. Default value is 0.
> > + at end table
> > +
> > +If a chroma option is not explicitly set, the corresponding luma value
> > +is set.
> >
> > @section stereo3d
> >
> > diff --git a/libavfilter/vf_smartblur.c b/libavfilter/vf_smartblur.c
> > index 7de1cd3..b53bd2f 100644
> > --- a/libavfilter/vf_smartblur.c
> > +++ b/libavfilter/vf_smartblur.c
> > @@ -25,6 +25,7 @@
> > * Ported from MPlayer libmpcodecs/vf_smartblur.c by Michael Niedermayer.
> > */
> >
> > +#include "libavutil/opt.h"
> > #include "libavutil/pixdesc.h"
> > #include "libswscale/swscale.h"
> >
> > @@ -50,6 +51,7 @@ typedef struct {
> > } FilterParam;
> >
> > typedef struct {
> > + const AVClass *class;
> > FilterParam luma;
> > FilterParam chroma;
> > int hsub;
> > @@ -57,62 +59,55 @@ typedef struct {
> > unsigned int sws_flags;
> > } SmartblurContext;
> >
> > -#define CHECK_PARAM(param, name, min, max, format, ret) \
> > - if (param < min || param > max) { \
> > - av_log(ctx, AV_LOG_ERROR, \
> > - "Invalid " #name " value " #format ": " \
> > - "must be included between range " #format " and " #format "\n",\
> > - param, min, max); \
> > - ret = AVERROR(EINVAL); \
> > - }
> > +#define OFFSET(x) offsetof(SmartblurContext, x)
> > +#define FLAGS AV_OPT_FLAG_FILTERING_PARAM|AV_OPT_FLAG_VIDEO_PARAM
> > +
> > +static const AVOption smartblur_options[] = {
> > + { "luma_radius", "set luma radius", OFFSET(luma.radius), AV_OPT_TYPE_FLOAT, {.dbl=1.0}, RADIUS_MIN, RADIUS_MAX, .flags=FLAGS },
> > + { "lt" , "set luma radius", OFFSET(luma.radius), AV_OPT_TYPE_FLOAT, {.dbl=1.0}, RADIUS_MIN, RADIUS_MAX, .flags=FLAGS },
>
> "lr"?
>
> > + { "luma_strength", "set luma strenght", OFFSET(luma.strength), AV_OPT_TYPE_FLOAT, {.dbl=1.0}, STRENGTH_MIN, STRENGTH_MAX, .flags=FLAGS },
> > + { "ls", "set luma strenght", OFFSET(luma.strength), AV_OPT_TYPE_FLOAT, {.dbl=1.0}, STRENGTH_MIN, STRENGTH_MAX, .flags=FLAGS },
> > + { "luma_threshold", "set luma threshold", OFFSET(luma.threshold), AV_OPT_TYPE_INT, {.i64=0}, THRESHOLD_MIN, THRESHOLD_MAX, .flags=FLAGS },
> > + { "lt", "set luma threshold", OFFSET(luma.threshold), AV_OPT_TYPE_INT, {.i64=0}, THRESHOLD_MIN, THRESHOLD_MAX, .flags=FLAGS },
> > +
> > + { "chroma_radius", "set chroma radius", OFFSET(chroma.radius), AV_OPT_TYPE_FLOAT, {.dbl=RADIUS_MIN-1}, RADIUS_MIN-1, RADIUS_MAX, .flags=FLAGS },
> > + { "cr", "set chroma radius", OFFSET(chroma.radius), AV_OPT_TYPE_FLOAT, {.dbl=RADIUS_MIN-1}, RADIUS_MIN-1, RADIUS_MAX, .flags=FLAGS },
> > + { "chroma_strength", "set chroma strenght", OFFSET(chroma.strength), AV_OPT_TYPE_FLOAT, {.dbl=STRENGTH_MIN-1}, STRENGTH_MIN-1, STRENGTH_MAX, .flags=FLAGS },
> > + { "cs", "set chroma strenght", OFFSET(chroma.strength), AV_OPT_TYPE_FLOAT, {.dbl=STRENGTH_MIN-1}, STRENGTH_MIN-1, STRENGTH_MAX, .flags=FLAGS },
>
> I see 4 "strenght" typo around here.
>
> > + { "chroma_threshold", "set chroma threshold", OFFSET(chroma.threshold), AV_OPT_TYPE_INT, {.i64=THRESHOLD_MIN-1}, THRESHOLD_MIN-1, THRESHOLD_MAX, .flags=FLAGS },
> > + { "ct", "set chroma threshold", OFFSET(chroma.threshold), AV_OPT_TYPE_INT, {.i64=THRESHOLD_MIN-1}, THRESHOLD_MIN-1, THRESHOLD_MAX, .flags=FLAGS },
> > + { NULL }
> > +};
> > +
> > +AVFILTER_DEFINE_CLASS(smartblur);
> >
> > static av_cold int init(AVFilterContext *ctx, const char *args)
> > {
> > SmartblurContext *sblur = ctx->priv;
> > - int n = 0, ret = 0;
> > - float lradius, lstrength, cradius, cstrength;
> > - int lthreshold, cthreshold;
> > -
> > - if (args)
> > - n = sscanf(args, "%f:%f:%d:%f:%f:%d",
> > - &lradius, &lstrength, <hreshold,
> > - &cradius, &cstrength, &cthreshold);
> > -
> > - if (n != 3 && n != 6) {
> > - av_log(ctx, AV_LOG_ERROR,
> > - "Incorrect number of parameters or invalid syntax: "
> > - "must be luma_radius:luma_strength:luma_threshold"
> > - "[:chroma_radius:chroma_strength:chroma_threshold]\n");
> > - return AVERROR(EINVAL);
> > - }
> > + int ret = 0;
> > + static const char *shorthand[] = {
> > + "luma_radius", "luma_strength", "luma_threshold",
> > + "chroma_radius", "chroma_strength", "chroma_threshold",
> > + NULL
> > + };
> > +
> > + sblur->class = &smartblur_class;
> > + av_opt_set_defaults(sblur);
> >
> > - sblur->luma.radius = lradius;
> > - sblur->luma.strength = lstrength;
> > - sblur->luma.threshold = lthreshold;
> > + if ((ret = av_opt_set_from_string(sblur, args, shorthand, "=", ":")) < 0)
> > + return ret;
> >
> > - if (n == 3) {
> > - sblur->chroma.radius = sblur->luma.radius;
> > + /* make chroma default to luma values, if not explicitely set */
> > + if (sblur->chroma.radius < RADIUS_MIN)
> > + sblur->chroma.radius = sblur->luma.radius;
> > + if (sblur->chroma.strength < STRENGTH_MIN)
> > sblur->chroma.strength = sblur->luma.strength;
> > + if (sblur->chroma.threshold < THRESHOLD_MIN)
> > sblur->chroma.threshold = sblur->luma.threshold;
> > - } else {
> > - sblur->chroma.radius = cradius;
> > - sblur->chroma.strength = cstrength;
> > - sblur->chroma.threshold = cthreshold;
> > - }
> >
> > sblur->luma.quality = sblur->chroma.quality = 3.0;
> > sblur->sws_flags = SWS_BICUBIC;
> >
> > - CHECK_PARAM(lradius, luma radius, RADIUS_MIN, RADIUS_MAX, %0.1f, ret)
> > - CHECK_PARAM(lstrength, luma strength, STRENGTH_MIN, STRENGTH_MAX, %0.1f, ret)
> > - CHECK_PARAM(lthreshold, luma threshold, THRESHOLD_MIN, THRESHOLD_MAX, %d, ret)
> > -
> > - if (n != 3) {
> > - CHECK_PARAM(sblur->chroma.radius, chroma radius, RADIUS_MIN, RADIUS_MAX, %0.1f, ret)
> > - CHECK_PARAM(sblur->chroma.strength, chroma strength, STRENGTH_MIN, STRENGTH_MAX, %0.1f, ret)
> > - CHECK_PARAM(sblur->chroma.threshold, chroma threshold, THRESHOLD_MIN,THRESHOLD_MAX, %d, ret)
> > - }
> > -
> > return ret;
> > }
> >
> > @@ -122,6 +117,7 @@ static av_cold void uninit(AVFilterContext *ctx)
> >
> > sws_freeContext(sblur->luma.filter_context);
> > sws_freeContext(sblur->chroma.filter_context);
> > + av_opt_free(sblur);
> > }
> >
> > static int query_formats(AVFilterContext *ctx)
> > @@ -310,4 +306,5 @@ AVFilter avfilter_vf_smartblur = {
> > .query_formats = query_formats,
> > .inputs = smartblur_inputs,
> > .outputs = smartblur_outputs,
> > + .priv_class = &smartblur_class,
> > };
>
> Rest LGTM
Thanks, pushed with more minor fixes.
--
FFmpeg = Frenzy and Fostering Magic Portentous Exuberant Gymnast
More information about the ffmpeg-devel
mailing list