[FFmpeg-devel] [PATCH] ac3dec_fixed: always use the USE_FIXED=1 variant of the AC3DecodeContext
Andreas Cadhalpun
andreas.cadhalpun at googlemail.com
Fri Mar 13 22:28:42 CET 2015
The AC3DecodeContext has a float (USE_FIXED=0) and an integer
(USE_FIXED=1) variant, both of which can be present in the same binary.
This is not only very confusing, but it also breaks horribly, when one
variant is used by code expecting the other.
This currently happens, because eac3dec.c is only compiled for the float
variant, but also used from ac3dec_fixed.c, which uses the integer
variant.
The result is memory corruption, leading to crashes.
So compile eac3dec.c once for each variant and adapt it, so that it
works with the integer variant.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun at googlemail.com>
---
libavcodec/Makefile | 2 +-
libavcodec/ac3dec.h | 6 +++---
libavcodec/ac3dec_fixed.c | 1 +
libavcodec/ac3dec_float.c | 1 +
libavcodec/eac3dec.c | 22 +++++++++++-----------
5 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/libavcodec/Makefile b/libavcodec/Makefile
index d15ef49..3451697 100644
--- a/libavcodec/Makefile
+++ b/libavcodec/Makefile
@@ -217,7 +217,7 @@ OBJS-$(CONFIG_DVVIDEO_DECODER) += dvdec.o dv.o dvdata.o
OBJS-$(CONFIG_DVVIDEO_ENCODER) += dvenc.o dv.o dvdata.o
OBJS-$(CONFIG_DXA_DECODER) += dxa.o
OBJS-$(CONFIG_DXTORY_DECODER) += dxtory.o
-OBJS-$(CONFIG_EAC3_DECODER) += eac3dec.o eac3_data.o
+OBJS-$(CONFIG_EAC3_DECODER) += eac3_data.o
OBJS-$(CONFIG_EAC3_ENCODER) += eac3enc.o eac3_data.o
OBJS-$(CONFIG_EACMV_DECODER) += eacmv.o
OBJS-$(CONFIG_EAMAD_DECODER) += eamad.o eaidct.o mpeg12.o \
diff --git a/libavcodec/ac3dec.h b/libavcodec/ac3dec.h
index be29f00..5259c60 100644
--- a/libavcodec/ac3dec.h
+++ b/libavcodec/ac3dec.h
@@ -243,19 +243,19 @@ typedef struct AC3DecodeContext {
* Parse the E-AC-3 frame header.
* This parses both the bit stream info and audio frame header.
*/
-int ff_eac3_parse_header(AC3DecodeContext *s);
+static int ff_eac3_parse_header(AC3DecodeContext *s);
/**
* Decode mantissas in a single channel for the entire frame.
* This is used when AHT mode is enabled.
*/
-void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
+static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch);
/**
* Apply spectral extension to each channel by copying lower frequency
* coefficients to higher frequency bins and applying side information to
* approximate the original high frequency signal.
*/
-void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
+static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s);
#endif /* AVCODEC_AC3DEC_H */
diff --git a/libavcodec/ac3dec_fixed.c b/libavcodec/ac3dec_fixed.c
index cb3b251..b4beee6 100644
--- a/libavcodec/ac3dec_fixed.c
+++ b/libavcodec/ac3dec_fixed.c
@@ -164,6 +164,7 @@ static void ac3_downmix_c_fixed16(int16_t **samples, int16_t (*matrix)[2],
}
}
+#include "eac3dec.c"
#include "ac3dec.c"
static const AVOption options[] = {
diff --git a/libavcodec/ac3dec_float.c b/libavcodec/ac3dec_float.c
index e7fc5cb..d74a0df 100644
--- a/libavcodec/ac3dec_float.c
+++ b/libavcodec/ac3dec_float.c
@@ -28,6 +28,7 @@
* Upmix delay samples from stereo to original channel layout.
*/
#include "ac3dec.h"
+#include "eac3dec.c"
#include "ac3dec.c"
static const AVOption options[] = {
diff --git a/libavcodec/eac3dec.c b/libavcodec/eac3dec.c
index 8e931fd..a6095b5 100644
--- a/libavcodec/eac3dec.c
+++ b/libavcodec/eac3dec.c
@@ -63,11 +63,11 @@ typedef enum {
#define EAC3_SR_CODE_REDUCED 3
-void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
+static void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
{
int bin, bnd, ch, i;
uint8_t wrapflag[SPX_MAX_BANDS]={1,0,}, num_copy_sections, copy_sizes[SPX_MAX_BANDS];
- float rms_energy[SPX_MAX_BANDS];
+ INTFLOAT rms_energy[SPX_MAX_BANDS];
/* Set copy index mapping table. Set wrap flags to apply a notch filter at
wrap points later on. */
@@ -101,7 +101,7 @@ void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
for (i = 0; i < num_copy_sections; i++) {
memcpy(&s->transform_coeffs[ch][bin],
&s->transform_coeffs[ch][s->spx_dst_start_freq],
- copy_sizes[i]*sizeof(float));
+ copy_sizes[i]*sizeof(INTFLOAT));
bin += copy_sizes[i];
}
@@ -109,9 +109,9 @@ void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
bin = s->spx_src_start_freq;
for (bnd = 0; bnd < s->num_spx_bands; bnd++) {
int bandsize = s->spx_band_sizes[bnd];
- float accum = 0.0f;
+ INTFLOAT accum = 0.0f;
for (i = 0; i < bandsize; i++) {
- float coeff = s->transform_coeffs[ch][bin++];
+ INTFLOAT coeff = s->transform_coeffs[ch][bin++];
accum += coeff * coeff;
}
rms_energy[bnd] = sqrtf(accum / bandsize);
@@ -124,7 +124,7 @@ void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
bin = s->spx_src_start_freq - 2;
for (bnd = 0; bnd < s->num_spx_bands; bnd++) {
if (wrapflag[bnd]) {
- float *coeffs = &s->transform_coeffs[ch][bin];
+ INTFLOAT *coeffs = &s->transform_coeffs[ch][bin];
coeffs[0] *= atten_tab[0];
coeffs[1] *= atten_tab[1];
coeffs[2] *= atten_tab[2];
@@ -140,10 +140,10 @@ void ff_eac3_apply_spectral_extension(AC3DecodeContext *s)
each band. */
bin = s->spx_src_start_freq;
for (bnd = 0; bnd < s->num_spx_bands; bnd++) {
- float nscale = s->spx_noise_blend[ch][bnd] * rms_energy[bnd] * (1.0f / INT32_MIN);
- float sscale = s->spx_signal_blend[ch][bnd];
+ INTFLOAT nscale = s->spx_noise_blend[ch][bnd] * rms_energy[bnd] * (1.0f / INT32_MIN);
+ INTFLOAT sscale = s->spx_signal_blend[ch][bnd];
for (i = 0; i < s->spx_band_sizes[bnd]; i++) {
- float noise = nscale * (int32_t)av_lfg_get(&s->dith_state);
+ INTFLOAT noise = nscale * (int32_t)av_lfg_get(&s->dith_state);
s->transform_coeffs[ch][bin] *= sscale;
s->transform_coeffs[ch][bin++] += noise;
}
@@ -195,7 +195,7 @@ static void idct6(int pre_mant[6])
pre_mant[5] = even0 - odd0;
}
-void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
+static void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
{
int bin, blk, gs;
int end_bap, gaq_mode;
@@ -288,7 +288,7 @@ void ff_eac3_decode_transform_coeffs_aht_ch(AC3DecodeContext *s, int ch)
}
}
-int ff_eac3_parse_header(AC3DecodeContext *s)
+static int ff_eac3_parse_header(AC3DecodeContext *s)
{
int i, blk, ch;
int ac3_exponent_strategy, parse_aht_info, parse_spx_atten_data;
--
2.1.4
More information about the ffmpeg-devel
mailing list