[FFmpeg-devel] [PATCH v3 5/5] libavfilter: VAAPI surface converter
Mark Thompson
sw at jkqxz.net
Tue Jan 19 15:10:59 CET 2016
On 19/01/16 12:27, wm4 wrote:
> On Mon, 18 Jan 2016 22:53:33 +0000
> Mark Thompson <sw at jkqxz.net> wrote:
>
>> ---
>> configure | 1 +
>> libavfilter/Makefile | 1 +
>> libavfilter/allfilters.c | 1 +
>> libavfilter/vf_vaapi_conv.c | 480 ++++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 483 insertions(+)
>> create mode 100644 libavfilter/vf_vaapi_conv.c
>>
>> diff --git a/configure b/configure
>> index 9da8e8b..71c0bc0 100755
>> --- a/configure
>> +++ b/configure
>> @@ -2913,6 +2913,7 @@ stereo3d_filter_deps="gpl"
>> subtitles_filter_deps="avformat avcodec libass"
>> super2xsai_filter_deps="gpl"
>> tinterlace_filter_deps="gpl"
>> +vaapi_conv_filter_deps="vaapi"
>> vidstabdetect_filter_deps="libvidstab"
>> vidstabtransform_filter_deps="libvidstab"
>> pixfmts_super2xsai_test_deps="super2xsai_filter"
>> diff --git a/libavfilter/Makefile b/libavfilter/Makefile
>> index e3e3561..9a4ca12 100644
>> --- a/libavfilter/Makefile
>> +++ b/libavfilter/Makefile
>> @@ -246,6 +246,7 @@ OBJS-$(CONFIG_TRANSPOSE_FILTER) += vf_transpose.o
>> OBJS-$(CONFIG_TRIM_FILTER) += trim.o
>> OBJS-$(CONFIG_UNSHARP_FILTER) += vf_unsharp.o
>> OBJS-$(CONFIG_USPP_FILTER) += vf_uspp.o
>> +OBJS-$(CONFIG_VAAPI) += vf_vaapi_conv.o
>> OBJS-$(CONFIG_VECTORSCOPE_FILTER) += vf_vectorscope.o
>> OBJS-$(CONFIG_VFLIP_FILTER) += vf_vflip.o
>> OBJS-$(CONFIG_VIDSTABDETECT_FILTER) += vidstabutils.o vf_vidstabdetect.o
>> diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c
>> index 1faf393..cfbfdca 100644
>> --- a/libavfilter/allfilters.c
>> +++ b/libavfilter/allfilters.c
>> @@ -266,6 +266,7 @@ void avfilter_register_all(void)
>> REGISTER_FILTER(TRIM, trim, vf);
>> REGISTER_FILTER(UNSHARP, unsharp, vf);
>> REGISTER_FILTER(USPP, uspp, vf);
>> + REGISTER_FILTER(VAAPI_CONV, vaapi_conv, vf);
>> REGISTER_FILTER(VECTORSCOPE, vectorscope, vf);
>> REGISTER_FILTER(VFLIP, vflip, vf);
>> REGISTER_FILTER(VIDSTABDETECT, vidstabdetect, vf);
>> diff --git a/libavfilter/vf_vaapi_conv.c b/libavfilter/vf_vaapi_conv.c
>> new file mode 100644
>> index 0000000..5180e7c
>> --- /dev/null
>> +++ b/libavfilter/vf_vaapi_conv.c
>> @@ -0,0 +1,480 @@
>> +/*
>> + * VAAPI converter (scaling and colour conversion).
>> + *
>> + * Copyright (C) 2016 Mark Thompson <mrt at jkqxz.net>
>> + *
>> + * This file is part of FFmpeg.
>> + *
>> + * FFmpeg is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU Lesser General Public
>> + * License as published by the Free Software Foundation; either
>> + * version 2.1 of the License, or (at your option) any later version.
>> + *
>> + * FFmpeg is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * Lesser General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU Lesser General Public
>> + * License along with FFmpeg; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
>> + */
>> +
>> +#include "avfilter.h"
>> +#include "formats.h"
>> +#include "internal.h"
>> +
>> +#include "libavutil/avassert.h"
>> +#include "libavutil/opt.h"
>> +#include "libavutil/pixdesc.h"
>> +#include "libavutil/vaapi.h"
>> +
>> +#include <va/va_vpp.h>
>> +
>> +typedef struct VAAPIConvContext {
>> + const AVClass *class;
>> +
>> + AVVAAPIHardwareContext *hardware_context;
>> + AVVAAPIPipelineConfig va_config;
>> + AVVAAPIPipelineContext va_context;
>> + int pipeline_initialised;
>> +
>> + int input_is_vaapi;
>> + AVVAAPISurfaceConfig input_config;
>> + AVVAAPISurfaceConfig output_config;
>> +
>> + int output_width;
>> + int output_height;
>> +
>> + struct {
>> + int64_t hardware_context;
>> + int output_size[2];
>> + } options;
>> +
>> +} VAAPIConvContext;
>> +
>> +
>> +static int vaapi_conv_query_formats(AVFilterContext *avctx)
>> +{
>> + VAAPIConvContext *ctx = avctx->priv;
>> + VAStatus vas;
>> + VAConfigAttrib rt_format = {
>> + .type = VAConfigAttribRTFormat
>> + };
>> + enum AVPixelFormat pix_fmt_list[16] = {
>> + AV_PIX_FMT_VAAPI,
>> + };
>> + int pix_fmt_count = 1, err;
>> +
>> +#if 0
>> + // The Intel driver doesn't return anything useful here - it only
>> + // declares support for YUV 4:2:0 formats, despite working perfectly
>> + // with 32-bit RGB ones. Given another usable platform, this will
>> + // need to be updated.
>> + vas = vaGetConfigAttributes(ctx->hardware_context->display,
>> + VAProfileNone, VAEntrypointVideoProc,
>> + &rt_format, 1);
>> +#else
>> + vas = VA_STATUS_SUCCESS;
>> + rt_format.value = VA_RT_FORMAT_YUV420 | VA_RT_FORMAT_RGB32;
>> +#endif
>> + if(vas != VA_STATUS_SUCCESS) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to get config attributes: "
>> + "%d (%s).\n", vas, vaErrorStr(vas));
>> + } else {
>> + if(rt_format.value & VA_RT_FORMAT_YUV420) {
>> + av_log(ctx, AV_LOG_DEBUG, "YUV420 formats supported.\n");
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUV420P;
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_NV12;
>> + }
>> + if(rt_format.value & VA_RT_FORMAT_YUV422) {
>> + av_log(ctx, AV_LOG_DEBUG, "YUV422 formats supported.\n");
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUV422P;
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUYV422;
>> + }
>> + if(rt_format.value & VA_RT_FORMAT_YUV444) {
>> + av_log(ctx, AV_LOG_DEBUG, "YUV444 formats supported.\n");
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_YUV444P;
>> + }
>> + if(rt_format.value & VA_RT_FORMAT_YUV400) {
>> + av_log(ctx, AV_LOG_DEBUG, "Grayscale formats supported.\n");
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_GRAY8;
>> + }
>> + if(rt_format.value & VA_RT_FORMAT_RGB32) {
>> + av_log(ctx, AV_LOG_DEBUG, "RGB32 formats supported.\n");
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_RGBA;
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_BGRA;
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_RGB0;
>> + pix_fmt_list[pix_fmt_count++] = AV_PIX_FMT_BGR0;
>> + }
>> + }
>> +
>> + pix_fmt_list[pix_fmt_count] = AV_PIX_FMT_NONE;
>> +
>> + if(avctx->inputs[0]) {
>> + err = ff_formats_ref(ff_make_format_list(pix_fmt_list),
>> + &avctx->inputs[0]->out_formats);
>> + if(err < 0)
>> + return err;
>> + }
>> +
>> + if(avctx->outputs[0]) {
>> + // Truncate the list: no support for normal output yet.
>> + pix_fmt_list[1] = AV_PIX_FMT_NONE;
>> +
>> + err = ff_formats_ref(ff_make_format_list(pix_fmt_list),
>> + &avctx->outputs[0]->in_formats);
>> + if(err < 0)
>> + return err;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int vaapi_conv_config_pipeline(VAAPIConvContext *ctx)
>> +{
>> + AVVAAPIPipelineConfig *config = &ctx->va_config;
>> + int err;
>> +
>> + config->profile = VAProfileNone;
>> + config->entrypoint = VAEntrypointVideoProc;
>> +
>> + config->attribute_count = 0;
>> +
>> + av_vaapi_lock_hardware_context(ctx->hardware_context);
>> +
>> + err = ff_vaapi_pipeline_init(&ctx->va_context, ctx->hardware_context,
>> + &ctx->va_config, &ctx->input_config,
>> + &ctx->output_config);
>> + if(err) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to create video processing "
>> + "pipeline: " "%d (%s).\n", err, av_err2str(err));
>> + }
>> +
>> + av_vaapi_unlock_hardware_context(ctx->hardware_context);
>> +
>> + return err;
>> +}
>> +
>> +static int vaapi_conv_config_input(AVFilterLink *inlink)
>> +{
>> + AVFilterContext *avctx = inlink->dst;
>> + VAAPIConvContext *ctx = avctx->priv;
>> + AVVAAPISurfaceConfig *config = &ctx->input_config;
>> +
>> + if(inlink->format == AV_PIX_FMT_VAAPI) {
>> + av_log(ctx, AV_LOG_INFO, "Input is VAAPI (using incoming surfaces).\n");
>> + ctx->input_is_vaapi = 1;
>> + return 0;
>> + }
>> + ctx->input_is_vaapi = 0;
>> +
>> + config->rt_format = VA_RT_FORMAT_YUV420;
>> + config->av_format = AV_PIX_FMT_VAAPI;
>> +
>> + switch(inlink->format) {
>> + case AV_PIX_FMT_BGR0:
>> + case AV_PIX_FMT_BGRA:
>> + config->image_format.fourcc = VA_FOURCC_BGRX;
>> + config->image_format.byte_order = VA_LSB_FIRST;
>> + config->image_format.bits_per_pixel = 32;
>> + config->image_format.depth = 8;
>> + config->image_format.red_mask = 0x00ff0000;
>> + config->image_format.green_mask = 0x0000ff00;
>> + config->image_format.blue_mask = 0x000000ff;
>> + config->image_format.alpha_mask = 0x00000000;
>> + break;
>> +
>> + case AV_PIX_FMT_RGB0:
>> + case AV_PIX_FMT_RGBA:
>> + config->image_format.fourcc = VA_FOURCC_RGBX;
>> + config->image_format.byte_order = VA_LSB_FIRST;
>> + config->image_format.bits_per_pixel = 32;
>> + config->image_format.depth = 8;
>> + config->image_format.red_mask = 0x000000ff;
>> + config->image_format.green_mask = 0x0000ff00;
>> + config->image_format.blue_mask = 0x00ff0000;
>> + config->image_format.alpha_mask = 0x00000000;
>> + break;
>> +
>> + case AV_PIX_FMT_NV12:
>> + config->image_format.fourcc = VA_FOURCC_NV12;
>> + config->image_format.bits_per_pixel = 12;
>> + break;
>> + case AV_PIX_FMT_YUV420P:
>> + config->image_format.fourcc = VA_FOURCC_YV12;
>> + config->image_format.bits_per_pixel = 12;
>> + break;
>
> Doesn't this duplicate what vaQueryImageFormats() returns?
>
> Also I think your AV_PIX_FMT <-> VA_FOURCC mappings are duplicated
> somewhere else to a degree.
Hmm, yes. I didn't put much thought into this part, because it was only a token set of things to make my two initial use-cases work (RGB colour-conversion, YV12/NV12 scale).
I'll leave it for now and come back to it when looking at expanding the inputs and outputs to be able to accept anything the hardware supports.
>> +
>> + default:
>> + av_log(ctx, AV_LOG_ERROR, "Tried to configure with invalid input "
>> + "format %s.\n", av_get_pix_fmt_name(inlink->format));
>> + return AVERROR(EINVAL);
>> + }
>> +
>> + config->count = 4;
>> + config->width = inlink->w;
>> + config->height = inlink->h;
>> +
>> + config->attribute_count = 0;
>> +
>> + if(ctx->output_width == 0)
>> + ctx->output_width = inlink->w;
>> + if(ctx->output_height == 0)
>> + ctx->output_height = inlink->h;
>> +
>> + return 0;
>> +}
>> +
>> +static int vaapi_conv_config_output(AVFilterLink *outlink)
>> +{
>> + AVFilterContext *avctx = outlink->src;
>> + VAAPIConvContext *ctx = avctx->priv;
>> + AVVAAPISurfaceConfig *config = &ctx->output_config;
>> +
>> + av_assert0(outlink->format == AV_PIX_FMT_VAAPI);
>> + outlink->w = ctx->output_width;
>> + outlink->h = ctx->output_height;
>> +
>> + config->rt_format = VA_RT_FORMAT_YUV420;
>> + config->av_format = AV_PIX_FMT_VAAPI;
>> +
>> + config->image_format.fourcc = VA_FOURCC_NV12;
>> + config->image_format.bits_per_pixel = 12;
>> +
>> + config->count = 4;
>> + config->width = outlink->w;
>> + config->height = outlink->h;
>> +
>> + config->attribute_count = 0;
>> +
>> + return vaapi_conv_config_pipeline(ctx);
>> +}
>> +
>> +static int vaapi_conv_filter_frame(AVFilterLink *inlink, AVFrame *pic)
>> +{
>> + AVFilterContext *avctx = inlink->dst;
>> + AVFilterLink *outlink = avctx->outputs[0];
>> + VAAPIConvContext *ctx = avctx->priv;
>> + AVVAAPISurface *input, *output;
>> + AVFrame *input_image, *output_image;
>> + VAProcPipelineParameterBuffer params;
>> + VABufferID params_id;
>> + VAStatus vas;
>> + int err;
>> +
>> + av_log(ctx, AV_LOG_DEBUG, "Filter frame: %s, %ux%u.\n",
>> + av_get_pix_fmt_name(pic->format), pic->width, pic->height);
>> +
>> + av_vaapi_lock_hardware_context(ctx->hardware_context);
>> +
>> + if(pic->data[3]) {
>> + input_image = pic;
>> + input = (AVVAAPISurface*)pic->buf[0]->data;
>> +
>> + } else {
>> + input_image = av_frame_alloc();
>> +
>> + err = ff_vaapi_get_input_surface(&ctx->va_context, input_image);
>> + if(err) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to allocate surface to "
>> + "copy input frame: %d (%s).\n", err, av_err2str(err));
>> + goto fail;
>> + }
>> +
>> + input = (AVVAAPISurface*)input_image->buf[0]->data;
>> +
>> + err = ff_vaapi_map_surface(input, 0);
>> + if(err) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to map input surface: "
>> + "%d (%s).\n", err, av_err2str(err));
>> + goto fail;
>> + }
>> +
>> + err = ff_vaapi_copy_to_surface(pic, input);
>> + if(err) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to copy to input surface: "
>> + "%d (%s).\n", err, av_err2str(err));
>> + goto fail;
>> + }
>> +
>> + err = ff_vaapi_unmap_surface(input, 1);
>> + if(err) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to unmap input surface: "
>> + "%d (%s).\n", err, av_err2str(err));
>> + goto fail;
>> + }
>
> So why is there not a simple upload function that just takes two
> AVFrames?
Yes. This sequence duplicated in several places and should be abstracted.
>> + }
>> + av_log(ctx, AV_LOG_DEBUG, "Using surface %#x for input image.\n",
>> + input->id);
>> +
>> + output_image = av_frame_alloc();
>> + if(!output_image) {
>> + err = AVERROR(ENOMEM);
>> + goto fail;
>> + }
>> + av_frame_copy_props(output_image, pic);
>> +
>> + err = ff_vaapi_get_output_surface(&ctx->va_context, output_image);
>> + if(err) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to allocate surface for "
>> + "output frame: %d (%s).\n", err, av_err2str(err));
>> + goto fail;
>> + }
>> + output = (AVVAAPISurface*)output_image->buf[0]->data;
>> + av_log(ctx, AV_LOG_DEBUG, "Using surface %#x for output image.\n",
>> + output->id);
>> +
>> + memset(¶ms, 0, sizeof(params));
>> +
>> + params.surface = input->id;
>> + params.surface_region = 0;
>> + params.surface_color_standard = VAProcColorStandardNone;
>
> Why not set it to the correct value? AVFrame.color_space or so.
Ok. (And needs another mapping table.)
>> +
>> + params.output_region = 0;
>> + params.output_background_color = 0xff000000;
>> + params.output_color_standard = VAProcColorStandardNone;
>> +
>> + params.pipeline_flags = 0;
>> + params.filter_flags = VA_FILTER_SCALING_HQ;
>> +
>> + vas = vaBeginPicture(ctx->hardware_context->display,
>> + ctx->va_context.context_id, output->id);
>> + if(vas != VA_STATUS_SUCCESS) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to attach new picture: "
>> + "%d (%s).\n", vas, vaErrorStr(vas));
>> + err = AVERROR_EXTERNAL;
>> + goto fail;
>> + }
>> +
>> + vas = vaCreateBuffer(ctx->hardware_context->display,
>> + ctx->va_context.context_id,
>> + VAProcPipelineParameterBufferType,
>> + sizeof(params), 1, ¶ms, ¶ms_id);
>> + if(vas != VA_STATUS_SUCCESS) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to create parameter buffer: "
>> + "%d (%s).\n", vas, vaErrorStr(vas));
>> + err = AVERROR_EXTERNAL;
>> + goto fail;
>> + }
>> + av_log(ctx, AV_LOG_DEBUG, "Pipeline parameter buffer is %#x.\n",
>> + params_id);
>> +
>> + vas = vaRenderPicture(ctx->hardware_context->display,
>> + ctx->va_context.context_id, ¶ms_id, 1);
>> + if(vas != VA_STATUS_SUCCESS) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to render parameter buffer: "
>> + "%d (%s).\n", vas, vaErrorStr(vas));
>> + err = AVERROR_EXTERNAL;
>> + goto fail;
>> + }
>> +
>> + vas = vaEndPicture(ctx->hardware_context->display,
>> + ctx->va_context.context_id);
>> + if(vas != VA_STATUS_SUCCESS) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to start picture processing: "
>> + "%d (%s).\n", vas, vaErrorStr(vas));
>> + err = AVERROR_EXTERNAL;
>> + goto fail;
>> + }
>> +
>> + vas = vaSyncSurface(ctx->hardware_context->display, output->id);
>> + if(vas != VA_STATUS_SUCCESS) {
>> + av_log(ctx, AV_LOG_ERROR, "Failed to sync picture completion: "
>> + "%d (%s).\n", vas, vaErrorStr(vas));
>> + err = AVERROR_EXTERNAL;
>> + goto fail;
>> + }
>> +
>> + av_frame_free(&input_image);
>> + if(pic->format != AV_PIX_FMT_VAAPI)
>> + av_frame_free(&pic);
>> +
>> + av_vaapi_unlock_hardware_context(ctx->hardware_context);
>> +
>> + return ff_filter_frame(outlink, output_image);
>> +
>> + fail:
>> + av_vaapi_unlock_hardware_context(ctx->hardware_context);
>> + return err;
>> +}
>> +
>> +static av_cold int vaapi_conv_init(AVFilterContext *avctx)
>> +{
>> + VAAPIConvContext *ctx = avctx->priv;
>> +
>> + if(ctx->options.hardware_context == 0) {
>> + av_log(ctx, AV_LOG_ERROR, "VAAPI encode requires hardware context.\n");
>> + av_assert0(0);
>
> Uh, what? Crash (sometimes)?
Oops, left in because the this filter is no longer testable through the ffmpeg driver.
>> + return AVERROR(EINVAL);
>> + }
>> + ctx->hardware_context =
>> + (AVVAAPIHardwareContext*)ctx->options.hardware_context;
>> +
>> + ctx->output_width = ctx->options.output_size[0];
>> + ctx->output_height = ctx->options.output_size[1];
>> +
>> + return 0;
>> +}
>> +
>> +static av_cold void vaapi_conv_uninit(AVFilterContext *avctx)
>> +{
>> + VAAPIConvContext *ctx = avctx->priv;
>> +
>> + if(ctx->pipeline_initialised) {
>> + av_vaapi_lock_hardware_context(ctx->hardware_context);
>> + ff_vaapi_pipeline_uninit(&ctx->va_context);
>> + av_vaapi_unlock_hardware_context(ctx->hardware_context);
>> + }
>> +}
>> +
>> +
>> +#define OFFSET(member) offsetof(VAAPIConvContext, options.member)
>> +#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM)
>> +static const AVOption vaapi_conv_options[] = {
>> + { "hardware_context", "VAAPI hardware context",
>> + OFFSET(hardware_context), AV_OPT_TYPE_INT64,
>> + { .i64 = 0 }, INT64_MIN, INT64_MAX, AV_OPT_FLAG_VIDEO_PARAM },
>
> Setting it this way is not ideal, but I guess there's no proper way yet.
Yeah. Maybe there should be an AV_OPT_TYPE_POINTER for the user to cleanly do naughty things like this...
>> + { "size", "Set output size",
>> + OFFSET(output_size), AV_OPT_TYPE_IMAGE_SIZE,
>> + { 0 }, 0, 0, FLAGS },
>> + { 0 },
>> +};
>> +
>> +static const AVClass vaapi_conv_class = {
>> + .class_name = "VAAPI/conv",
>> + .item_name = av_default_item_name,
>> + .option = vaapi_conv_options,
>> + .version = LIBAVUTIL_VERSION_INT,
>> +};
>> +
>> +static const AVFilterPad vaapi_conv_inputs[] = {
>> + {
>> + .name = "default",
>> + .type = AVMEDIA_TYPE_VIDEO,
>> + .filter_frame = &vaapi_conv_filter_frame,
>> + .config_props = &vaapi_conv_config_input,
>> + },
>> + { 0 }
>> +};
>> +
>> +static const AVFilterPad vaapi_conv_outputs[] = {
>> + {
>> + .name = "default",
>> + .type = AVMEDIA_TYPE_VIDEO,
>> + .config_props = &vaapi_conv_config_output,
>> + },
>> + { 0 }
>> +};
>> +
>> +AVFilter ff_vf_vaapi_conv = {
>> + .name = "vaapi_conv",
>> + .description = NULL_IF_CONFIG_SMALL("Convert to/from VAAPI surfaces."),
>> + .priv_size = sizeof(VAAPIConvContext),
>> + .init = &vaapi_conv_init,
>> + .uninit = &vaapi_conv_uninit,
>> + .query_formats = &vaapi_conv_query_formats,
>> + .inputs = vaapi_conv_inputs,
>> + .outputs = vaapi_conv_outputs,
>> + .priv_class = &vaapi_conv_class,
>> +};
>
More information about the ffmpeg-devel
mailing list