[FFmpeg-devel] [PATCH 06/10] crystalhd: Remove h.264 parser
Philip Langdale
philipl at overt.org
Wed Oct 26 22:40:24 EEST 2016
Now that we don't need to do ridiculous things to work out if a
frame is interlaced or not, we don't need an extra h.264 parser.
Signed-off-by: Philip Langdale <philipl at overt.org>
---
libavcodec/crystalhd.c | 55 ++++----------------------------------------------
1 file changed, 4 insertions(+), 51 deletions(-)
diff --git a/libavcodec/crystalhd.c b/libavcodec/crystalhd.c
index 3db0e17..b68701a 100644
--- a/libavcodec/crystalhd.c
+++ b/libavcodec/crystalhd.c
@@ -83,7 +83,6 @@
#include <libcrystalhd/libcrystalhd_if.h>
#include "avcodec.h"
-#include "h264dec.h"
#include "internal.h"
#include "libavutil/imgutils.h"
#include "libavutil/intreadwrite.h"
@@ -112,7 +111,6 @@ typedef struct OpaqueList {
struct OpaqueList *next;
uint64_t fake_timestamp;
uint64_t reordered_opaque;
- uint8_t pic_type;
} OpaqueList;
typedef struct {
@@ -125,7 +123,6 @@ typedef struct {
uint32_t orig_extradata_size;
AVBSFContext *bsfc;
- AVCodecParserContext *parser;
uint8_t is_70012;
uint8_t *sps_pps_buf;
@@ -221,8 +218,7 @@ static inline void print_frame_info(CHDContext *priv, BC_DTS_PROC_OUT *output)
* OpaqueList functions
****************************************************************************/
-static uint64_t opaque_list_push(CHDContext *priv, uint64_t reordered_opaque,
- uint8_t pic_type)
+static uint64_t opaque_list_push(CHDContext *priv, uint64_t reordered_opaque)
{
OpaqueList *newNode = av_mallocz(sizeof (OpaqueList));
if (!newNode) {
@@ -239,7 +235,6 @@ static uint64_t opaque_list_push(CHDContext *priv, uint64_t reordered_opaque,
}
priv->tail = newNode;
newNode->reordered_opaque = reordered_opaque;
- newNode->pic_type = pic_type;
return newNode->fake_timestamp;
}
@@ -340,7 +335,6 @@ static av_cold int uninit(AVCodecContext *avctx)
priv->orig_extradata_size = 0;
}
- av_parser_close(priv->parser);
if (priv->bsfc) {
av_bsf_free(&priv->bsfc);
}
@@ -533,14 +527,6 @@ static av_cold int init(AVCodecContext *avctx)
goto fail;
}
- if (avctx->codec->id == AV_CODEC_ID_H264) {
- priv->parser = av_parser_init(avctx->codec->id);
- if (!priv->parser)
- av_log(avctx, AV_LOG_WARNING,
- "Cannot open the h.264 parser! Interlaced h.264 content "
- "will not be detected reliably.\n");
- priv->parser->flags = PARSER_FLAG_COMPLETE_FRAMES;
- }
av_log(avctx, AV_LOG_VERBOSE, "CrystalHD: Init complete.\n");
return 0;
@@ -561,7 +547,6 @@ static inline CopyRet copy_frame(AVCodecContext *avctx,
CHDContext *priv = avctx->priv_data;
int64_t pkt_pts = AV_NOPTS_VALUE;
- uint8_t pic_type = 0;
uint8_t bottom_field = (output->PicInfo.flags & VDEC_FLAG_BOTTOMFIELD) ==
VDEC_FLAG_BOTTOMFIELD;
@@ -579,23 +564,18 @@ static inline CopyRet copy_frame(AVCodecContext *avctx,
OpaqueList *node = opaque_list_pop(priv, output->PicInfo.timeStamp);
if (node) {
pkt_pts = node->reordered_opaque;
- pic_type = node->pic_type;
av_free(node);
} else {
/*
* We will encounter a situation where a timestamp cannot be
* popped if a second field is being returned. In this case,
* each field has the same timestamp and the first one will
- * cause it to be popped. To keep subsequent calculations
- * simple, pic_type should be set a FIELD value - doesn't
- * matter which, but I chose BOTTOM.
+ * cause it to be popped. We'll avoid overwriting the valid
+ * timestamp below.
*/
- pic_type = PICT_BOTTOM_FIELD;
}
av_log(avctx, AV_LOG_VERBOSE, "output \"pts\": %"PRIu64"\n",
output->PicInfo.timeStamp);
- av_log(avctx, AV_LOG_VERBOSE, "output picture type %d\n",
- pic_type);
}
ret = DtsGetDriverStatus(priv->dev, &decoder_status);
@@ -806,7 +786,6 @@ static int crystalhd_decode_packet(AVCodecContext *avctx, const AVPacket *avpkt)
BC_STATUS bc_ret;
CHDContext *priv = avctx->priv_data;
HANDLE dev = priv->dev;
- uint8_t pic_type = 0;
AVPacket filtered_packet = { 0 };
int ret = 0;
@@ -859,32 +838,6 @@ static int crystalhd_decode_packet(AVCodecContext *avctx, const AVPacket *avpkt)
av_packet_unref(&filter_packet);
}
- if (priv->parser) {
- uint8_t *pout;
- int psize;
- int index;
- H264Context *h = priv->parser->priv_data;
-
- index = av_parser_parse2(priv->parser, avctx, &pout, &psize,
- avpkt->data, avpkt->size, avpkt->pts,
- avpkt->dts, 0);
- if (index < 0) {
- av_log(avctx, AV_LOG_WARNING,
- "CrystalHD: Failed to parse h.264 packet to "
- "detect interlacing.\n");
- } else if (index != avpkt->size) {
- av_log(avctx, AV_LOG_WARNING,
- "CrystalHD: Failed to parse h.264 packet "
- "completely. Interlaced frames may be "
- "incorrectly detected.\n");
- } else {
- av_log(avctx, AV_LOG_VERBOSE,
- "CrystalHD: parser picture type %d\n",
- h->picture_structure);
- pic_type = h->picture_structure;
- }
- }
-
if (avpkt->size < tx_free) {
/*
* Despite being notionally opaque, either libcrystalhd or
@@ -896,7 +849,7 @@ static int crystalhd_decode_packet(AVCodecContext *avctx, const AVPacket *avpkt)
* we know will not be mangled.
*/
int64_t safe_pts = avpkt->pts == AV_NOPTS_VALUE ? 0 : avpkt->pts;
- uint64_t pts = opaque_list_push(priv, safe_pts, pic_type);
+ uint64_t pts = opaque_list_push(priv, safe_pts);
if (!pts) {
ret = AVERROR(ENOMEM);
goto exit;
--
2.9.3
More information about the ffmpeg-devel
mailing list