[FFmpeg-devel] [PATCH] lavc/qsvenc: add quality status to side_data
Li, Zhong
zhong.li at intel.com
Fri Aug 10 11:12:11 EEST 2018
> From: ffmpeg-devel [mailto:ffmpeg-devel-bounces at ffmpeg.org] On Behalf
> Of James Almer
> Sent: Wednesday, August 8, 2018 11:08 PM
> To: ffmpeg-devel at ffmpeg.org
> Subject: Re: [FFmpeg-devel] [PATCH] lavc/qsvenc: add quality status to
> side_data
>
> On 8/8/2018 11:51 AM, Zhong Li wrote:
> > Add fix a memory leak issue as James's comments.
> >
> > Signed-off-by: Zhong Li <zhong.li at intel.com>
> > ---
> > libavcodec/qsvenc.c | 18 ++++++++++++++----
> > libavcodec/qsvenc_h264.c | 5 -----
> > 2 files changed, 14 insertions(+), 9 deletions(-)
> >
> > diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c index
> > 65dae31..2107c5b 100644
> > --- a/libavcodec/qsvenc.c
> > +++ b/libavcodec/qsvenc.c
> > @@ -1200,8 +1200,10 @@ static int encode_frame(AVCodecContext
> *avctx, QSVEncContext *q,
> > if (!sync) {
> > av_freep(&bs);
> > #if QSV_VERSION_ATLEAST(1, 26)
> > - if (avctx->codec_id == AV_CODEC_ID_H264)
> > + if (avctx->codec_id == AV_CODEC_ID_H264) {
> > av_freep(&enc_info);
> > + av_freep(&enc_buf);
> > + }
> > #endif
> > av_packet_unref(&new_pkt);
> > return AVERROR(ENOMEM);
> > @@ -1220,8 +1222,10 @@ static int encode_frame(AVCodecContext
> *avctx, QSVEncContext *q,
> > av_packet_unref(&new_pkt);
> > av_freep(&bs);
> > #if QSV_VERSION_ATLEAST(1, 26)
> > - if (avctx->codec_id == AV_CODEC_ID_H264)
> > + if (avctx->codec_id == AV_CODEC_ID_H264) {
> > av_freep(&enc_info);
> > + av_freep(&enc_buf);
> > + }
> > #endif
> > av_freep(&sync);
> > return (ret == MFX_ERR_MORE_DATA) ?
> > @@ -1240,8 +1244,10 @@ static int encode_frame(AVCodecContext
> *avctx, QSVEncContext *q,
> > av_packet_unref(&new_pkt);
> > av_freep(&bs);
> > #if QSV_VERSION_ATLEAST(1, 26)
> > - if (avctx->codec_id == AV_CODEC_ID_H264)
> > + if (avctx->codec_id == AV_CODEC_ID_H264) {
> > av_freep(&enc_info);
> > + av_freep(&enc_buf);
> > + }
> > #endif
> > }
> >
> > @@ -1264,6 +1270,7 @@ int ff_qsv_encode(AVCodecContext *avctx,
> QSVEncContext *q,
> > mfxSyncPoint *sync;
> > #if QSV_VERSION_ATLEAST(1, 26)
> > mfxExtAVCEncodedFrameInfo *enc_info;
> > + mfxExtBuffer **enc_buf;
> > #endif
> >
> > av_fifo_generic_read(q->async_fifo, &new_pkt,
> > sizeof(new_pkt), NULL); @@ -1295,10 +1302,13 @@
> > FF_ENABLE_DEPRECATION_WARNINGS
> >
> > #if QSV_VERSION_ATLEAST(1, 26)
> > if (avctx->codec_id == AV_CODEC_ID_H264) {
> > + enc_buf = bs->ExtParam;
> > enc_info = (mfxExtAVCEncodedFrameInfo
> *)(*bs->ExtParam);
> > - av_log(avctx, AV_LOG_DEBUG, "QP is %d\n",
> enc_info->QP);
> > + ff_side_data_set_encoder_stats(&new_pkt,
> > + enc_info->QP * FF_QP2LAMBDA, NULL, 0,
> > + avctx->coded_frame->pict_type);
>
> This will generate a deprecated warning and will need to be changed once
> coded_frame is removed.
>
> Add a local pict_type variable instead and set it using the existing checks.
> Then use it here and to set avctx->coded_frame->pict_type.
Thanks for your suggestion. It has been updated.
>
> > q->sum_frame_qp += enc_info->QP;
>
> This is unused now that you removed the log message below.
>
> > av_freep(&enc_info);
> > + av_freep(&enc_buf);
> > }
> > #endif
> > av_freep(&bs);
> > diff --git a/libavcodec/qsvenc_h264.c b/libavcodec/qsvenc_h264.c index
> > b87bef6..5c262e5 100644
> > --- a/libavcodec/qsvenc_h264.c
> > +++ b/libavcodec/qsvenc_h264.c
> > @@ -95,11 +95,6 @@ static av_cold int qsv_enc_close(AVCodecContext
> > *avctx) {
> > QSVH264EncContext *q = avctx->priv_data;
> >
> > -#if QSV_VERSION_ATLEAST(1, 26)
> > - av_log(avctx, AV_LOG_VERBOSE, "encoded %d frames, avarge qp
> is %.2f\n",
> > - avctx->frame_number,(double)q->qsv.sum_frame_qp /
> avctx->frame_number);
> > -#endif
> > -
> > return ff_qsv_enc_close(avctx, &q->qsv); }
> >
> >
>
More information about the ffmpeg-devel
mailing list