[FFmpeg-devel] [PATCH V3] libavfilter/vaapi: enable vaapi rotation feature via call Intel iHD driver
Mark Thompson
sw at jkqxz.net
Thu Nov 1 01:35:34 EET 2018
On 31/10/18 02:43, Zachary Zhou wrote:
> libavfilter/vaapi: enable vaapi rotation feature via call Intel iHD driver
I'd make the title something like "libavfilter: add rotate_vaapi filter". There is no reason to mention a particular implementation - anyone can implement this API.
> It supports clockwise rotation by 0/90/180/270 degrees defined in
> va/va_vpp.h, tested following command line on SKL platform
>
> ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128
> -hwaccel_output_format vaapi -i input.264 -vf "rotation_vaapi=angle=180"
> -c:v h264_vaapi output.h264
>
> Signed-off-by: Zachary Zhou <zachary.zhou at intel.com>
> ---
> configure | 4 +
> libavfilter/Makefile | 1 +
> libavfilter/allfilters.c | 1 +
> libavfilter/vaapi_vpp.h | 1 +
> libavfilter/vf_rotate_vaapi.c | 252 ++++++++++++++++++++++++++++++++++
> 5 files changed, 259 insertions(+)
> create mode 100644 libavfilter/vf_rotate_vaapi.c
Referencing other discussion, I think this filter should do both the rotation and mirroring features. I don't know what the filter should be called, though - matching the transpose filter as transpose_vaapi seems the most logical choice to me, but I admit the exact options aren't quite right.
The effect of rotating by one or three right angles surprised me - I would expect the size to be changed as well, so a 1280x720 input becomes a 720x1280 output rather than squishing the video.
> diff --git a/configure b/configure
> index 85d5dd5962..4b5718135e 100755
> --- a/configure
> +++ b/configure
> @@ -3439,6 +3439,7 @@ scale_filter_deps="swscale"
> scale_qsv_filter_deps="libmfx"
> select_filter_select="pixelutils"
> sharpness_vaapi_filter_deps="vaapi"
> +rotation_vaapi_filter_deps="vaapi"
> showcqt_filter_deps="avcodec avformat swscale"
> showcqt_filter_suggest="libfontconfig libfreetype"
> showcqt_filter_select="fft"
> @@ -6390,6 +6391,9 @@ if enabled vaapi; then
> fi
>
> check_cpp_condition vaapi_1 "va/va.h" "VA_CHECK_VERSION(1, 0, 0)"
> + if ! check_struct "va/va.h" "struct _VAProcPipelineCaps" rotation_flags; then
> + disable rotation_vaapi_filter
> + fi
Use the dependencies instead like other components. (See vp9_vaapi_hwaccel for a check_struct like this one.)
> fi
>
> if enabled_all opencl libdrm ; then
> diff --git a/libavfilter/Makefile b/libavfilter/Makefile
> index 108a2f87d7..534650364a 100644
> --- a/libavfilter/Makefile
> +++ b/libavfilter/Makefile
> @@ -349,6 +349,7 @@ OBJS-$(CONFIG_SETRANGE_FILTER) += vf_setparams.o
> OBJS-$(CONFIG_SETSAR_FILTER) += vf_aspect.o
> OBJS-$(CONFIG_SETTB_FILTER) += settb.o
> OBJS-$(CONFIG_SHARPNESS_VAAPI_FILTER) += vf_misc_vaapi.o vaapi_vpp.o
> +OBJS-$(CONFIG_ROTATION_VAAPI_FILTER) += vf_rotate_vaapi.o vaapi_vpp.o
> OBJS-$(CONFIG_SHOWINFO_FILTER) += vf_showinfo.o
> OBJS-$(CONFIG_SHOWPALETTE_FILTER) += vf_showpalette.o
> OBJS-$(CONFIG_SHUFFLEFRAMES_FILTER) += vf_shuffleframes.o
> diff --git a/libavfilter/allfilters.c b/libavfilter/allfilters.c
> index 557590850b..4b90a7f440 100644
> --- a/libavfilter/allfilters.c
> +++ b/libavfilter/allfilters.c
> @@ -333,6 +333,7 @@ extern AVFilter ff_vf_setrange;
> extern AVFilter ff_vf_setsar;
> extern AVFilter ff_vf_settb;
> extern AVFilter ff_vf_sharpness_vaapi;
> +extern AVFilter ff_vf_rotation_vaapi;
> extern AVFilter ff_vf_showinfo;
> extern AVFilter ff_vf_showpalette;
> extern AVFilter ff_vf_shuffleframes;
> diff --git a/libavfilter/vaapi_vpp.h b/libavfilter/vaapi_vpp.h
> index 0bc31018d4..cfe19b689f 100644
> --- a/libavfilter/vaapi_vpp.h
> +++ b/libavfilter/vaapi_vpp.h
> @@ -44,6 +44,7 @@ typedef struct VAAPIVPPContext {
> int output_width; // computed width
> int output_height; // computed height
>
> + int rotation_state;
No reason to put this in the common context, it can be in the rotate-specific one.
> VABufferID filter_buffers[VAProcFilterCount];
> int nb_filter_buffers;
>
> diff --git a/libavfilter/vf_rotate_vaapi.c b/libavfilter/vf_rotate_vaapi.c
> new file mode 100644
> index 0000000000..82e2a0fce4
> --- /dev/null
> +++ b/libavfilter/vf_rotate_vaapi.c
> @@ -0,0 +1,252 @@
> +/*
> + * This file is part of FFmpeg.
> + *
> + * FFmpeg is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * FFmpeg is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with FFmpeg; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +#include <string.h>
> +
> +#include "libavutil/avassert.h"
> +#include "libavutil/mem.h"
> +#include "libavutil/opt.h"
> +#include "libavutil/pixdesc.h"
> +
> +#include "avfilter.h"
> +#include "formats.h"
> +#include "internal.h"
> +#include "vaapi_vpp.h"
> +
> +// Rotation angle values
> +enum RotationAngle {
> + ROTATION_0 = 0,
> + ROTATION_90 = 90,
> + ROTATION_180 = 180,
> + ROTATION_270 = 270,
I'm not sure these four constants add anything. Just use N where you have ROTATION_N?
> +
> + ROTATION_MIN = ROTATION_0,
> + ROTATION_MAX = ROTATION_270,
> + ROTATION_DEFAULT = ROTATION_0,
> +};
> +
> +typedef struct RotationVAAPIContext {
> + VAAPIVPPContext vpp_ctx; // must be the first field
> +
> + int rotation;
> +} RotationVAAPIContext;
> +
> +static int rotation_vaapi_build_filter_params(AVFilterContext *avctx)
> +{
> + VAAPIVPPContext *vpp_ctx = avctx->priv;
> + RotationVAAPIContext *ctx = avctx->priv;
> +
> + VAStatus vas;
> + int support_flag;
> +
> + VAProcPipelineCaps pipeline_caps;
> +
> + memset(&pipeline_caps, 0, sizeof(pipeline_caps));
> + vas = vaQueryVideoProcPipelineCaps(vpp_ctx->hwctx->display,
> + vpp_ctx->va_context,
> + NULL, 0,
> + &pipeline_caps);
> + if (vas != VA_STATUS_SUCCESS) {
> + av_log(avctx, AV_LOG_ERROR, "Failed to query pipeline "
> + "caps: %d (%s).\n", vas, vaErrorStr(vas));
> + return AVERROR(EIO);
> + }
> +
> + if (!pipeline_caps.rotation_flags) {
> + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support rotation\n");
> + return AVERROR(EINVAL);
> + }
> +
> + switch (ctx->rotation) {
> + case ROTATION_0:
> + vpp_ctx->rotation_state = VA_ROTATION_NONE;
> + break;
> + case ROTATION_90:
> + vpp_ctx->rotation_state = VA_ROTATION_90;
> + break;
> + case ROTATION_180:
> + vpp_ctx->rotation_state = VA_ROTATION_180;
> + break;
> + case ROTATION_270:
> + vpp_ctx->rotation_state = VA_ROTATION_270;
> + break;
> + default:
> + av_log(avctx, AV_LOG_ERROR, "Failed to set rotation_state to %d. "
> + "Clockwise %d, %d, %d and %d are only supported\n",
> + ctx->rotation,
> + ROTATION_0, ROTATION_90, ROTATION_180, ROTATION_270);
> + return AVERROR(EINVAL);
> + }
> +
> + support_flag = pipeline_caps.rotation_flags &
> + (1 << vpp_ctx->rotation_state);
> + if (!support_flag) {
> + av_log(avctx, AV_LOG_ERROR, "VAAPI driver doesn't support %d\n",
> + ctx->rotation);
> + return AVERROR(EINVAL);
> + }
> +
> + return 0;
> +}
> +
> +static int rotation_vaapi_filter_frame(AVFilterLink *inlink, AVFrame *input_frame)
> +{
> + AVFilterContext *avctx = inlink->dst;
> + AVFilterLink *outlink = avctx->outputs[0];
> + VAAPIVPPContext *vpp_ctx = avctx->priv;
> + AVFrame *output_frame = NULL;
> + VASurfaceID input_surface, output_surface;
> + VARectangle input_region;
> +
> + VAProcPipelineParameterBuffer params;
> + int err;
> +
> + av_log(avctx, AV_LOG_DEBUG, "Filter input: %s, %ux%u (%"PRId64").\n",
> + av_get_pix_fmt_name(input_frame->format),
> + input_frame->width, input_frame->height, input_frame->pts);
> +
> + if (vpp_ctx->va_context == VA_INVALID_ID)
> + return AVERROR(EINVAL);
> +
> + input_surface = (VASurfaceID)(uintptr_t)input_frame->data[3];
> + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp input.\n",
Not misc.
> + input_surface);
> +
> + output_frame = ff_get_video_buffer(outlink, vpp_ctx->output_width,
> + vpp_ctx->output_height);
> + if (!output_frame) {
> + err = AVERROR(ENOMEM);
> + goto fail;
> + }
> +
> + output_surface = (VASurfaceID)(uintptr_t)output_frame->data[3];
> + av_log(avctx, AV_LOG_DEBUG, "Using surface %#x for misc vpp output.\n",
Also not misc.
> + output_surface);
> + memset(¶ms, 0, sizeof(params));
> + input_region = (VARectangle) {
> + .x = 0,
> + .y = 0,
> + .width = input_frame->width,
> + .height = input_frame->height,
> + };
> +
> + switch (vpp_ctx->rotation_state) {
> + case VA_ROTATION_NONE:
> + case VA_ROTATION_90:
> + case VA_ROTATION_180:
> + case VA_ROTATION_270:
> + params.rotation_state = vpp_ctx->rotation_state;
> + break;
> + default:
> + av_log(avctx, AV_LOG_ERROR, "VAAPI doesn't support %d\n",
> + vpp_ctx->rotation_state);
> + goto fail;
> + }
> +
> + if (vpp_ctx->nb_filter_buffers) {
> + params.filters = &vpp_ctx->filter_buffers[0];
> + params.num_filters = vpp_ctx->nb_filter_buffers;
> + }
Shouldn't nb_filter_buffers always be zero here?
> + params.surface = input_surface;
> + params.surface_region = &input_region;
> + params.surface_color_standard =
> + ff_vaapi_vpp_colour_standard(input_frame->colorspace);
> +
> + params.output_region = NULL;
> + params.output_background_color = 0xff000000;
> + params.output_color_standard = params.surface_color_standard;
> +
> + params.pipeline_flags = 0;
> + params.filter_flags = VA_FRAME_PICTURE;
> +
> + err = ff_vaapi_vpp_render_picture(avctx, ¶ms, output_surface);
> + if (err < 0)
> + goto fail;
> +
> + err = av_frame_copy_props(output_frame, input_frame);
I think you want to fix up SAR here somehow to account for the rotation in the 90 and 270 cases.
> + if (err < 0)
> + goto fail;
> + av_frame_free(&input_frame);
> +
> + av_log(avctx, AV_LOG_DEBUG, "Filter output: %s, %ux%u (%"PRId64").\n",
> + av_get_pix_fmt_name(output_frame->format),
> + output_frame->width, output_frame->height, output_frame->pts);
> +
> + return ff_filter_frame(outlink, output_frame);
> +
> +fail:
> + av_frame_free(&input_frame);
> + av_frame_free(&output_frame);
> + return err;
> +}
> +
> +static av_cold int rotation_vaapi_init(AVFilterContext *avctx)
> +{
> + VAAPIVPPContext *vpp_ctx = avctx->priv;
> +
> + ff_vaapi_vpp_ctx_init(avctx);
> + vpp_ctx->pipeline_uninit = ff_vaapi_vpp_pipeline_uninit;
> + vpp_ctx->build_filter_params = rotation_vaapi_build_filter_params;
> + vpp_ctx->output_format = AV_PIX_FMT_NONE;
> +
> + return 0;
> +}
> +
> +#define ROFFSET(x) offsetof(RotationVAAPIContext, x)
> +#define FLAGS (AV_OPT_FLAG_VIDEO_PARAM | AV_OPT_FLAG_FILTERING_PARAM)
> +static const AVOption rotation_vaapi_options[] = {
> + { "angle", "set roation direction", ROFFSET(rotation), AV_OPT_TYPE_INT, { .i64 = ROTATION_MIN }, ROTATION_MIN, ROTATION_MAX, FLAGS, "angle" },
> + { "clock_0", "rotate clockwise 0 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_0 }, .flags=FLAGS, .unit = "angle" },
> + { "clock_90", "rotate clockwise 90 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_90}, .flags=FLAGS, .unit = "angle" },
> + { "clock_180", "rotate clockwise 180 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_180 }, .flags=FLAGS, .unit = "angle" },
> + { "clock_270", "rotate clockwise 270 degrees", 0, AV_OPT_TYPE_CONST, { .i64 = ROTATION_270 }, .flags=FLAGS, .unit = "angle" },
Do these names add anything? I would expect that people will write "90" rather than "clock_90".
> + { NULL },
> +};
> +
> +AVFILTER_DEFINE_CLASS(rotation_vaapi);
> +
> +static const AVFilterPad rotation_vaapi_inputs[] = {
> + {
> + .name = "default",
> + .type = AVMEDIA_TYPE_VIDEO,
> + .filter_frame = &rotation_vaapi_filter_frame,
> + .config_props = &ff_vaapi_vpp_config_input,
> + },
> + { NULL }
> +};
> +
> +static const AVFilterPad rotation_vaapi_outputs[] = {
> + {
> + .name = "default",
> + .type = AVMEDIA_TYPE_VIDEO,
> + .config_props = &ff_vaapi_vpp_config_output,
> + },
> + { NULL }
> +};
> +
> +AVFilter ff_vf_rotation_vaapi = {
> + .name = "rotation_vaapi",
> + .description = NULL_IF_CONFIG_SMALL("VAAPI VPP for rotation"),
> + .priv_size = sizeof(RotationVAAPIContext),
> + .init = &rotation_vaapi_init,
> + .uninit = &ff_vaapi_vpp_ctx_uninit,
> + .query_formats = &ff_vaapi_vpp_query_formats,
> + .inputs = rotation_vaapi_inputs,
> + .outputs = rotation_vaapi_outputs,
> + .priv_class = &rotation_vaapi_class,
> + .flags_internal = FF_FILTER_FLAG_HWFRAME_AWARE,
> +};
>
Thanks,
- Mark
More information about the ffmpeg-devel
mailing list