[FFmpeg-devel] [PATCH] doc: fix various typos
Moritz Barsnick
barsnick at gmx.net
Fri Feb 1 01:23:44 EET 2019
Found with the help of codespell-1.14.0.
Signed-off-by: Moritz Barsnick <barsnick at gmx.net>
---
doc/bitstream_filters.texi | 2 +-
doc/codecs.texi | 2 +-
doc/filters.texi | 24 ++++++++++++------------
doc/formats.texi | 2 +-
doc/general.texi | 8 ++++----
doc/muxers.texi | 2 +-
6 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/doc/bitstream_filters.texi b/doc/bitstream_filters.texi
index b779265f58..076b910e40 100644
--- a/doc/bitstream_filters.texi
+++ b/doc/bitstream_filters.texi
@@ -561,7 +561,7 @@ P3 D65
@end table
@item transfer_characteristics
-Set the color transfert.
+Set the color transfer.
Available values are:
@table @samp
diff --git a/doc/codecs.texi b/doc/codecs.texi
index 02d5a1b222..c1c6996dee 100644
--- a/doc/codecs.texi
+++ b/doc/codecs.texi
@@ -1230,7 +1230,7 @@ instead of alpha. Default is 0.
@item dump_separator @var{string} (@emph{input})
Separator used to separate the fields printed on the command line about the
Stream parameters.
-For example to separate the fields with newlines and indention:
+For example to separate the fields with newlines and indentation:
@example
ffprobe -dump_separator "
" -i ~/videos/matrixbench_mpeg2.mpg
diff --git a/doc/filters.texi b/doc/filters.texi
index fc98323af0..60d9bbd047 100644
--- a/doc/filters.texi
+++ b/doc/filters.texi
@@ -606,7 +606,7 @@ The lower value, the more samples will be detected as impulsive noise.
Set burst fusion, in percentage of window size. Allowed range is @code{0} to
@code{10}. Default value is @code{2}.
If any two samples deteced as noise are spaced less than this value then any
-sample inbetween those two samples will be also detected as noise.
+sample between those two samples will be also detected as noise.
@item m
Set overlap method.
@@ -1220,7 +1220,7 @@ Set max allowed Impulse Response filter duration in seconds. Default is 30 secon
Allowed range is 0.1 to 60 seconds.
@item response
-Show IR frequency reponse, magnitude(magenta) and phase(green) and group delay(yellow) in additional video stream.
+Show IR frequency response, magnitude(magenta) and phase(green) and group delay(yellow) in additional video stream.
By default it is disabled.
@item channel
@@ -1382,7 +1382,7 @@ Z-plane zeros/poles, polar degrees
@item r
Set kind of processing.
-Can be @code{d} - direct or @code{s} - serial cascading. Defauls is @code{s}.
+Can be @code{d} - direct or @code{s} - serial cascading. Default is @code{s}.
@item e
Set filtering precision.
@@ -1399,7 +1399,7 @@ single-precision floating-point
@end table
@item response
-Show IR frequency reponse, magnitude and phase in additional video stream.
+Show IR frequency response, magnitude and phase in additional video stream.
By default it is disabled.
@item channel
@@ -1425,7 +1425,7 @@ used for all remaining channels.
@itemize
@item
-Apply 2 pole elliptic notch at arround 5000Hz for 48000 Hz sample rate:
+Apply 2 pole elliptic notch at around 5000Hz for 48000 Hz sample rate:
@example
aiir=k=1:z=7.957584807809675810E-1 -2.575128568908332300 3.674839853930788710 -2.57512875289799137 7.957586296317130880E-1:p=1 -2.86950072432325953 3.63022088054647218 -2.28075678147272232 6.361362326477423500E-1:f=tf:r=d
@end example
@@ -5647,7 +5647,7 @@ For example radius of 3 will instruct filter to calculate average of 7 frames.
Set factor to amplify difference. Default is 2. Allowed range is from 0 to 65535.
@item threshold
-Set threshold for difference amplification. Any differrence greater or equal to
+Set threshold for difference amplification. Any difference greater or equal to
this value will not alter source pixel. Default is 10.
Allowed range is from 0 to 65535.
@@ -6032,7 +6032,7 @@ The filter accepts the following options.
@item sigma
Set denoising strength. Default value is 1.
Allowed range is from 0 to 999.9.
-The denoising algorith is very sensitive to sigma, so adjust it
+The denoising algorithm is very sensitive to sigma, so adjust it
according to the source.
@item block
@@ -10264,7 +10264,7 @@ The filter accepts the following options:
Set horizontal sigma, standard deviation of Gaussian blur. Default is @code{0.5}.
@item steps
-Set number of steps for Gaussian approximation. Defauls is @code{1}.
+Set number of steps for Gaussian approximation. Default is @code{1}.
@item planes
Set which planes to filter. By default all planes are filtered.
@@ -15335,7 +15335,7 @@ Keep the same color primaries property (default).
@end table
@item color_trc
-Set the color transfert.
+Set the color transfer.
Available values are:
@table @samp
@@ -19135,7 +19135,7 @@ the cpu version tonemap currently. A setting of 0.0 disables this option.
@item threshold
The tonemapping algorithm parameters is fine-tuned per each scene. And a threshold
-is used to detect whether the scene has changed or not. If the distance beween
+is used to detect whether the scene has changed or not. If the distance between
the current frame average brightness and the current running average exceeds
a threshold value, we would re-calculate scene average and peak brightness.
The default value is 0.2.
@@ -19557,7 +19557,7 @@ Set outer coloring mode.
It shall assume one of following values:
@table @option
@item iteration_count
-Set iteration cound mode.
+Set iteration count mode.
@item normalized_iteration_count
set normalized iteration count mode.
@end table
@@ -20135,7 +20135,7 @@ Default is @code{log}.
@item acount
Set how much frames to accumulate in histogram.
-Defauls is 1. Setting this to -1 accumulates all frames.
+Default is 1. Setting this to -1 accumulates all frames.
@item rheight
Set histogram ratio of window height.
diff --git a/doc/formats.texi b/doc/formats.texi
index 4f334e03c7..3cee7767d8 100644
--- a/doc/formats.texi
+++ b/doc/formats.texi
@@ -211,7 +211,7 @@ is @code{0} (meaning that no offset is applied).
@item dump_separator @var{string} (@emph{input})
Separator used to separate the fields printed on the command line about the
Stream parameters.
-For example to separate the fields with newlines and indention:
+For example to separate the fields with newlines and indentation:
@example
ffprobe -dump_separator "
" -i ~/videos/matrixbench_mpeg2.mpg
diff --git a/doc/general.texi b/doc/general.texi
index 2bc33d180d..fe94c40386 100644
--- a/doc/general.texi
+++ b/doc/general.texi
@@ -1135,10 +1135,10 @@ following image formats are supported:
@item DPCM Sol @tab @tab X
@item DPCM Xan @tab @tab X
@tab Used in Origin's Wing Commander IV AVI files.
- at item DSD (Direct Stream Digitial), least significant bit first @tab @tab X
- at item DSD (Direct Stream Digitial), most significant bit first @tab @tab X
- at item DSD (Direct Stream Digitial), least significant bit first, planar @tab @tab X
- at item DSD (Direct Stream Digitial), most significant bit first, planar @tab @tab X
+ at item DSD (Direct Stream Digital), least significant bit first @tab @tab X
+ at item DSD (Direct Stream Digital), most significant bit first @tab @tab X
+ at item DSD (Direct Stream Digital), least significant bit first, planar @tab @tab X
+ at item DSD (Direct Stream Digital), most significant bit first, planar @tab @tab X
@item DSP Group TrueSpeech @tab @tab X
@item DST (Direct Stream Transfer) @tab @tab X
@item DV audio @tab @tab X
diff --git a/doc/muxers.texi b/doc/muxers.texi
index 7f7e607946..18ce9b15c7 100644
--- a/doc/muxers.texi
+++ b/doc/muxers.texi
@@ -1018,7 +1018,7 @@ ffmpeg -re -i in.ts -b:v 1000k -b:a 64k -a53cc 1 -f hls \
http://example.com/live/out.m3u8
@end example
This example adds @code{#EXT-X-MEDIA} tag with @code{TYPE=CLOSED-CAPTIONS} in
-the master playlist with group name 'cc', langauge 'en' (english) and
+the master playlist with group name 'cc', language 'en' (english) and
INSTREAM-ID 'CC1'. Also, it adds @code{CLOSED-CAPTIONS} attribute with group
name 'cc' for the output variant stream.
@example
--
2.20.1
More information about the ffmpeg-devel
mailing list