[FFmpeg-devel] [PATCH v3 01/12] vaapi_encode: Support more RC modes
Mark Thompson
sw at jkqxz.net
Sun Feb 10 21:46:54 EET 2019
Allow setting the mode explicitly, and try to make a sensible choice
given the available parameters if not.
---
doc/encoders.texi | 24 +++
libavcodec/vaapi_encode.c | 382 +++++++++++++++++++++++++++-----------
libavcodec/vaapi_encode.h | 65 +++++++
3 files changed, 358 insertions(+), 113 deletions(-)
diff --git a/doc/encoders.texi b/doc/encoders.texi
index e86ae69cc5..29625ba07c 100644
--- a/doc/encoders.texi
+++ b/doc/encoders.texi
@@ -2824,6 +2824,30 @@ Set the B-frame reference depth. When set to one (the default), all B-frames
will refer only to P- or I-frames. When set to greater values multiple layers
of B-frames will be present, frames in each layer only referring to frames in
higher layers.
+
+ at item rc_mode
+Set the rate control mode to use. A given driver may only support a subset of
+modes.
+
+Possible modes:
+ at table @option
+ at item auto
+Choose the mode automatically based on driver support and the other options.
+This is the default.
+ at item CQP
+Constant-quality.
+ at item CBR
+Constant-bitrate.
+ at item VBR
+Variable-bitrate.
+ at item ICQ
+Intelligent constant-quality.
+ at item QVBR
+Quality-defined variable-bitrate.
+ at item AVBR
+Average variable bitrate.
+ at end table
+
@end table
Each encoder also has its own specific options:
diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
index b4e9fadaee..2dda451882 100644
--- a/libavcodec/vaapi_encode.c
+++ b/libavcodec/vaapi_encode.c
@@ -1283,17 +1283,42 @@ fail:
return err;
}
+static const VAAPIEncodeRCMode vaapi_encode_rc_modes[] = {
+ // Bitrate Quality
+ // | Maxrate | HRD/VBV
+ { 0 }, // | | | |
+ { RC_MODE_CQP, "CQP", 1, VA_RC_CQP, 0, 0, 1, 0 },
+ { RC_MODE_CBR, "CBR", 1, VA_RC_CBR, 1, 0, 0, 1 },
+ { RC_MODE_VBR, "VBR", 1, VA_RC_VBR, 1, 1, 0, 1 },
+#if VA_CHECK_VERSION(1, 1, 0)
+ { RC_MODE_ICQ, "ICQ", 1, VA_RC_ICQ, 0, 0, 1, 0 },
+#else
+ { RC_MODE_ICQ, "ICQ", 0 },
+#endif
+#if VA_CHECK_VERSION(1, 3, 0)
+ { RC_MODE_QVBR, "QVBR", 1, VA_RC_QVBR, 1, 1, 1, 1 },
+ { RC_MODE_AVBR, "AVBR", 0, VA_RC_AVBR, 1, 0, 0, 0 },
+#else
+ { RC_MODE_QVBR, "QVBR", 0 },
+ { RC_MODE_AVBR, "AVBR", 0 },
+#endif
+};
+
static av_cold int vaapi_encode_init_rate_control(AVCodecContext *avctx)
{
VAAPIEncodeContext *ctx = avctx->priv_data;
+ uint32_t supported_va_rc_modes;
+ const VAAPIEncodeRCMode *rc_mode;
int64_t rc_bits_per_second;
int rc_target_percentage;
int rc_window_size;
+ int rc_quality;
int64_t hrd_buffer_size;
int64_t hrd_initial_buffer_fullness;
int fr_num, fr_den;
VAConfigAttrib rc_attr = { VAConfigAttribRateControl };
VAStatus vas;
+ char supported_rc_modes_string[64];
vas = vaGetConfigAttributes(ctx->hwctx->display,
ctx->va_profile, ctx->va_entrypoint,
@@ -1303,119 +1328,213 @@ static av_cold int vaapi_encode_init_rate_control(AVCodecContext *avctx)
"config attribute: %d (%s).\n", vas, vaErrorStr(vas));
return AVERROR_EXTERNAL;
}
-
if (rc_attr.value == VA_ATTRIB_NOT_SUPPORTED) {
av_log(avctx, AV_LOG_VERBOSE, "Driver does not report any "
- "supported rate control modes: assuming constant-quality.\n");
- ctx->va_rc_mode = VA_RC_CQP;
- return 0;
- }
- if (ctx->codec->flags & FLAG_CONSTANT_QUALITY_ONLY ||
- avctx->flags & AV_CODEC_FLAG_QSCALE ||
- avctx->bit_rate <= 0) {
- if (rc_attr.value & VA_RC_CQP) {
- av_log(avctx, AV_LOG_VERBOSE, "Using constant-quality mode.\n");
- ctx->va_rc_mode = VA_RC_CQP;
- if (avctx->bit_rate > 0 || avctx->rc_max_rate > 0) {
- av_log(avctx, AV_LOG_WARNING, "Bitrate target parameters "
- "ignored in constant-quality mode.\n");
+ "supported rate control modes: assuming CQP only.\n");
+ supported_va_rc_modes = VA_RC_CQP;
+ strcpy(supported_rc_modes_string, "unknown");
+ } else {
+ char *str = supported_rc_modes_string;
+ size_t len = sizeof(supported_rc_modes_string);
+ int i, first = 1, res;
+
+ supported_va_rc_modes = rc_attr.value;
+ for (i = 0; i < FF_ARRAY_ELEMS(vaapi_encode_rc_modes); i++) {
+ rc_mode = &vaapi_encode_rc_modes[i];
+ if (supported_va_rc_modes & rc_mode->va_mode) {
+ res = snprintf(str, len, "%s%s",
+ first ? "" : ", ", rc_mode->name);
+ first = 0;
+ if (res < 0) {
+ *str = 0;
+ break;
+ }
+ len -= res;
+ str += res;
+ if (len == 0)
+ break;
}
- return 0;
- } else {
- av_log(avctx, AV_LOG_ERROR, "Driver does not support "
- "constant-quality mode (%#x).\n", rc_attr.value);
- return AVERROR(EINVAL);
}
- }
- if (!(rc_attr.value & (VA_RC_CBR | VA_RC_VBR))) {
- av_log(avctx, AV_LOG_ERROR, "Driver does not support any "
- "bitrate-targetted rate control modes.\n");
- return AVERROR(EINVAL);
+ av_log(avctx, AV_LOG_DEBUG, "Driver supports RC modes %s.\n",
+ supported_rc_modes_string);
+ }
+
+ // Rate control mode selection:
+ // * If the user has set a mode explicitly with the rc_mode option,
+ // use it and fail if it is not available.
+ // * If an explicit QP option has been set, use CQP.
+ // * If the codec is CQ-only, use CQP.
+ // * If the QSCALE avcodec option is set, use CQP.
+ // * If bitrate and quality are both set, try QVBR.
+ // * If quality is set, try ICQ, then CQP.
+ // * If bitrate and maxrate are set and have the same value, try CBR.
+ // * If a bitrate is set, try AVBR, then VBR, then CBR.
+ // * If no bitrate is set, try ICQ, then CQP.
+
+#define TRY_RC_MODE(mode, fail) do { \
+ rc_mode = &vaapi_encode_rc_modes[mode]; \
+ if (!(rc_mode->va_mode & supported_va_rc_modes)) { \
+ if (fail) { \
+ av_log(avctx, AV_LOG_ERROR, "Driver does not support %s " \
+ "RC mode (supported modes: %s).\n", rc_mode->name, \
+ supported_rc_modes_string); \
+ return AVERROR(EINVAL); \
+ } \
+ av_log(avctx, AV_LOG_DEBUG, "Driver does not support %s " \
+ "RC mode.\n", rc_mode->name); \
+ rc_mode = NULL; \
+ } else { \
+ goto rc_mode_found; \
+ } \
+ } while (0)
+
+ if (ctx->explicit_rc_mode)
+ TRY_RC_MODE(ctx->explicit_rc_mode, 1);
+
+ if (ctx->explicit_qp)
+ TRY_RC_MODE(RC_MODE_CQP, 1);
+
+ if (ctx->codec->flags & FLAG_CONSTANT_QUALITY_ONLY)
+ TRY_RC_MODE(RC_MODE_CQP, 1);
+
+ if (avctx->flags & AV_CODEC_FLAG_QSCALE)
+ TRY_RC_MODE(RC_MODE_CQP, 1);
+
+ if (avctx->bit_rate > 0 && avctx->global_quality > 0)
+ TRY_RC_MODE(RC_MODE_QVBR, 0);
+
+ if (avctx->global_quality > 0) {
+ TRY_RC_MODE(RC_MODE_ICQ, 0);
+ TRY_RC_MODE(RC_MODE_CQP, 0);
+ }
+
+ if (avctx->bit_rate > 0 && avctx->rc_max_rate == avctx->bit_rate)
+ TRY_RC_MODE(RC_MODE_CBR, 0);
+
+ if (avctx->bit_rate > 0) {
+ TRY_RC_MODE(RC_MODE_AVBR, 0);
+ TRY_RC_MODE(RC_MODE_VBR, 0);
+ TRY_RC_MODE(RC_MODE_CBR, 0);
+ } else {
+ TRY_RC_MODE(RC_MODE_ICQ, 0);
+ TRY_RC_MODE(RC_MODE_CQP, 0);
}
- if (avctx->rc_buffer_size)
- hrd_buffer_size = avctx->rc_buffer_size;
- else if (avctx->rc_max_rate > 0)
- hrd_buffer_size = avctx->rc_max_rate;
- else
- hrd_buffer_size = avctx->bit_rate;
- if (avctx->rc_initial_buffer_occupancy) {
- if (avctx->rc_initial_buffer_occupancy > hrd_buffer_size) {
- av_log(avctx, AV_LOG_ERROR, "Invalid RC buffer settings: "
- "must have initial buffer size (%d) < "
- "buffer size (%"PRId64").\n",
- avctx->rc_initial_buffer_occupancy, hrd_buffer_size);
+ av_log(avctx, AV_LOG_ERROR, "Driver does not support any "
+ "RC mode compatible with selected options "
+ "(supported modes: %s).\n", supported_rc_modes_string);
+ return AVERROR(EINVAL);
+
+rc_mode_found:
+ if (rc_mode->bitrate) {
+ if (avctx->bit_rate <= 0) {
+ av_log(avctx, AV_LOG_ERROR, "Bitrate must be set for %s "
+ "RC mode.\n", rc_mode->name);
return AVERROR(EINVAL);
}
- hrd_initial_buffer_fullness = avctx->rc_initial_buffer_occupancy;
- } else {
- hrd_initial_buffer_fullness = hrd_buffer_size * 3 / 4;
- }
- if (avctx->rc_max_rate && avctx->rc_max_rate < avctx->bit_rate) {
- av_log(avctx, AV_LOG_ERROR, "Invalid bitrate settings: must have "
- "bitrate (%"PRId64") <= maxrate (%"PRId64").\n",
- avctx->bit_rate, avctx->rc_max_rate);
- return AVERROR(EINVAL);
- }
+ if (rc_mode->mode == RC_MODE_AVBR) {
+ // For maximum confusion AVBR is hacked into the existing API
+ // by overloading some of the fields with completely different
+ // meanings.
- if (avctx->rc_max_rate > avctx->bit_rate) {
- if (!(rc_attr.value & VA_RC_VBR)) {
- av_log(avctx, AV_LOG_WARNING, "Driver does not support "
- "VBR mode (%#x), using CBR mode instead.\n",
- rc_attr.value);
- ctx->va_rc_mode = VA_RC_CBR;
+ // Target percentage does not apply in AVBR mode.
+ rc_bits_per_second = avctx->bit_rate;
- rc_bits_per_second = avctx->bit_rate;
+ // Accuracy tolerance range for meeting the specified target
+ // bitrate. It's very unclear how this is actually intended
+ // to work - since we do want to get the specified bitrate,
+ // set the accuracy to 100% for now.
rc_target_percentage = 100;
- } else {
- ctx->va_rc_mode = VA_RC_VBR;
- rc_bits_per_second = avctx->rc_max_rate;
- rc_target_percentage = (avctx->bit_rate * 100) /
- avctx->rc_max_rate;
- }
-
- } else if (avctx->rc_max_rate == avctx->bit_rate) {
- if (!(rc_attr.value & VA_RC_CBR)) {
- av_log(avctx, AV_LOG_WARNING, "Driver does not support "
- "CBR mode (%#x), using VBR mode instead.\n",
- rc_attr.value);
- ctx->va_rc_mode = VA_RC_VBR;
+ // Convergence period in frames. The GOP size reflects the
+ // user's intended block size for cutting, so reusing that
+ // as the convergence period seems a reasonable default.
+ rc_window_size = avctx->gop_size > 0 ? avctx->gop_size : 60;
+
+ } else if (rc_mode->maxrate) {
+ if (avctx->rc_max_rate > 0) {
+ if (avctx->rc_max_rate < avctx->bit_rate) {
+ av_log(avctx, AV_LOG_ERROR, "Invalid bitrate settings: "
+ "bitrate (%"PRId64") must not be greater than "
+ "maxrate (%"PRId64").\n", avctx->bit_rate,
+ avctx->rc_max_rate);
+ return AVERROR(EINVAL);
+ }
+ rc_bits_per_second = avctx->rc_max_rate;
+ rc_target_percentage = (avctx->bit_rate * 100) /
+ avctx->rc_max_rate;
+ } else {
+ // We only have a target bitrate, but this mode requires
+ // that a maximum rate be supplied as well. Since the
+ // user does not want this to be a constraint, arbitrarily
+ // pick a maximum rate of double the target rate.
+ rc_bits_per_second = 2 * avctx->bit_rate;
+ rc_target_percentage = 50;
+ }
} else {
- ctx->va_rc_mode = VA_RC_CBR;
+ if (avctx->rc_max_rate > avctx->bit_rate) {
+ av_log(avctx, AV_LOG_WARNING, "Max bitrate is ignored "
+ "in %s RC mode.\n", rc_mode->name);
+ }
+ rc_bits_per_second = avctx->bit_rate;
+ rc_target_percentage = 100;
}
-
- rc_bits_per_second = avctx->bit_rate;
+ } else {
+ rc_bits_per_second = 0;
rc_target_percentage = 100;
+ }
+ if (rc_mode->quality) {
+ if (ctx->explicit_qp) {
+ rc_quality = ctx->explicit_qp;
+ } else if (avctx->global_quality > 0) {
+ rc_quality = avctx->global_quality;
+ } else {
+ rc_quality = ctx->codec->default_quality;
+ av_log(avctx, AV_LOG_WARNING, "No quality level set; "
+ "using default (%d).\n", rc_quality);
+ }
} else {
- if (rc_attr.value & VA_RC_VBR) {
- ctx->va_rc_mode = VA_RC_VBR;
-
- // We only have a target bitrate, but VAAPI requires that a
- // maximum rate be supplied as well. Since the user has
- // offered no particular constraint, arbitrarily pick a
- // maximum rate of double the target rate.
- rc_bits_per_second = 2 * avctx->bit_rate;
- rc_target_percentage = 50;
+ rc_quality = 0;
+ }
+
+ if (rc_mode->hrd) {
+ if (avctx->rc_buffer_size)
+ hrd_buffer_size = avctx->rc_buffer_size;
+ else if (avctx->rc_max_rate > 0)
+ hrd_buffer_size = avctx->rc_max_rate;
+ else
+ hrd_buffer_size = avctx->bit_rate;
+ if (avctx->rc_initial_buffer_occupancy) {
+ if (avctx->rc_initial_buffer_occupancy > hrd_buffer_size) {
+ av_log(avctx, AV_LOG_ERROR, "Invalid RC buffer settings: "
+ "must have initial buffer size (%d) <= "
+ "buffer size (%"PRId64").\n",
+ avctx->rc_initial_buffer_occupancy, hrd_buffer_size);
+ return AVERROR(EINVAL);
+ }
+ hrd_initial_buffer_fullness = avctx->rc_initial_buffer_occupancy;
} else {
- ctx->va_rc_mode = VA_RC_CBR;
+ hrd_initial_buffer_fullness = hrd_buffer_size * 3 / 4;
+ }
- rc_bits_per_second = avctx->bit_rate;
- rc_target_percentage = 100;
+ rc_window_size = (hrd_buffer_size * 1000) / rc_bits_per_second;
+ } else {
+ if (avctx->rc_buffer_size || avctx->rc_initial_buffer_occupancy) {
+ av_log(avctx, AV_LOG_WARNING, "Buffering settings are ignored "
+ "in %s RC mode.\n", rc_mode->name);
}
- }
- rc_window_size = (hrd_buffer_size * 1000) / rc_bits_per_second;
+ hrd_buffer_size = 0;
+ hrd_initial_buffer_fullness = 0;
- av_log(avctx, AV_LOG_VERBOSE, "RC mode: %s, %d%% of %"PRId64" bps "
- "over %d ms.\n", ctx->va_rc_mode == VA_RC_VBR ? "VBR" : "CBR",
- rc_target_percentage, rc_bits_per_second, rc_window_size);
- av_log(avctx, AV_LOG_VERBOSE, "RC buffer: %"PRId64" bits, "
- "initial fullness %"PRId64" bits.\n",
- hrd_buffer_size, hrd_initial_buffer_fullness);
+ if (rc_mode->mode != RC_MODE_AVBR) {
+ // Already set (with completely different meaning) for AVBR.
+ rc_window_size = 1000;
+ }
+ }
if (rc_bits_per_second > UINT32_MAX ||
hrd_buffer_size > UINT32_MAX ||
@@ -1425,36 +1544,70 @@ static av_cold int vaapi_encode_init_rate_control(AVCodecContext *avctx)
return AVERROR(EINVAL);
}
+ ctx->rc_mode = rc_mode;
+ ctx->rc_quality = rc_quality;
+ ctx->va_rc_mode = rc_mode->va_mode;
ctx->va_bit_rate = rc_bits_per_second;
- ctx->config_attributes[ctx->nb_config_attributes++] =
- (VAConfigAttrib) {
- .type = VAConfigAttribRateControl,
- .value = ctx->va_rc_mode,
- };
+ av_log(avctx, AV_LOG_VERBOSE, "RC mode: %s.\n", rc_mode->name);
+ if (rc_attr.value == VA_ATTRIB_NOT_SUPPORTED) {
+ // This driver does not want the RC mode attribute to be set.
+ } else {
+ ctx->config_attributes[ctx->nb_config_attributes++] =
+ (VAConfigAttrib) {
+ .type = VAConfigAttribRateControl,
+ .value = ctx->va_rc_mode,
+ };
+ }
- ctx->rc_params.misc.type = VAEncMiscParameterTypeRateControl;
- ctx->rc_params.rc = (VAEncMiscParameterRateControl) {
- .bits_per_second = rc_bits_per_second,
- .target_percentage = rc_target_percentage,
- .window_size = rc_window_size,
- .initial_qp = 0,
- .min_qp = (avctx->qmin > 0 ? avctx->qmin : 0),
- .basic_unit_size = 0,
+ if (rc_mode->quality)
+ av_log(avctx, AV_LOG_VERBOSE, "RC quality: %d.\n", rc_quality);
+
+ if (rc_mode->va_mode != VA_RC_CQP) {
+ if (rc_mode->mode == RC_MODE_AVBR) {
+ av_log(avctx, AV_LOG_VERBOSE, "RC target: %"PRId64" bps "
+ "converging in %d frames with %d%% accuracy.\n",
+ rc_bits_per_second, rc_window_size,
+ rc_target_percentage);
+ } else if (rc_mode->bitrate) {
+ av_log(avctx, AV_LOG_VERBOSE, "RC target: %d%% of "
+ "%"PRId64" bps over %d ms.\n", rc_target_percentage,
+ rc_bits_per_second, rc_window_size);
+ }
+
+ ctx->rc_params.misc.type = VAEncMiscParameterTypeRateControl;
+ ctx->rc_params.rc = (VAEncMiscParameterRateControl) {
+ .bits_per_second = rc_bits_per_second,
+ .target_percentage = rc_target_percentage,
+ .window_size = rc_window_size,
+ .initial_qp = 0,
+ .min_qp = (avctx->qmin > 0 ? avctx->qmin : 0),
+ .basic_unit_size = 0,
#if VA_CHECK_VERSION(1, 1, 0)
- .max_qp = (avctx->qmax > 0 ? avctx->qmax : 0),
+ .ICQ_quality_factor = av_clip(rc_quality, 1, 51),
+ .max_qp = (avctx->qmax > 0 ? avctx->qmax : 0),
#endif
- };
- vaapi_encode_add_global_param(avctx, &ctx->rc_params.misc,
- sizeof(ctx->rc_params));
+#if VA_CHECK_VERSION(1, 3, 0)
+ .quality_factor = rc_quality,
+#endif
+ };
+ vaapi_encode_add_global_param(avctx, &ctx->rc_params.misc,
+ sizeof(ctx->rc_params));
+ }
- ctx->hrd_params.misc.type = VAEncMiscParameterTypeHRD;
- ctx->hrd_params.hrd = (VAEncMiscParameterHRD) {
- .initial_buffer_fullness = hrd_initial_buffer_fullness,
- .buffer_size = hrd_buffer_size,
- };
- vaapi_encode_add_global_param(avctx, &ctx->hrd_params.misc,
- sizeof(ctx->hrd_params));
+ if (rc_mode->hrd) {
+ av_log(avctx, AV_LOG_VERBOSE, "RC buffer: %"PRId64" bits, "
+ "initial fullness %"PRId64" bits.\n",
+ hrd_buffer_size, hrd_initial_buffer_fullness);
+
+ ctx->hrd_params.misc.type = VAEncMiscParameterTypeHRD;
+ ctx->hrd_params.hrd = (VAEncMiscParameterHRD) {
+ .initial_buffer_fullness = hrd_initial_buffer_fullness,
+ .buffer_size = hrd_buffer_size,
+ };
+ vaapi_encode_add_global_param(avctx, &ctx->hrd_params.misc,
+ sizeof(ctx->hrd_params));
+ }
if (avctx->framerate.num > 0 && avctx->framerate.den > 0)
av_reduce(&fr_num, &fr_den,
@@ -1463,6 +1616,9 @@ static av_cold int vaapi_encode_init_rate_control(AVCodecContext *avctx)
av_reduce(&fr_num, &fr_den,
avctx->time_base.den, avctx->time_base.num, 65535);
+ av_log(avctx, AV_LOG_VERBOSE, "RC framerate: %d/%d (%.2f fps).\n",
+ fr_num, fr_den, (double)fr_num / fr_den);
+
ctx->fr_params.misc.type = VAEncMiscParameterTypeFrameRate;
ctx->fr_params.fr.framerate = (unsigned int)fr_den << 16 | fr_num;
diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
index a4206865ea..44a8db566e 100644
--- a/libavcodec/vaapi_encode.h
+++ b/libavcodec/vaapi_encode.h
@@ -129,6 +129,36 @@ typedef struct VAAPIEncodeProfile {
VAProfile va_profile;
} VAAPIEncodeProfile;
+enum {
+ RC_MODE_AUTO,
+ RC_MODE_CQP,
+ RC_MODE_CBR,
+ RC_MODE_VBR,
+ RC_MODE_ICQ,
+ RC_MODE_QVBR,
+ RC_MODE_AVBR,
+ RC_MODE_MAX = RC_MODE_AVBR,
+};
+
+typedef struct VAAPIEncodeRCMode {
+ // Mode from above enum (RC_MODE_*).
+ int mode;
+ // Name.
+ const char *name;
+ // Supported in the compile-time VAAPI version.
+ int supported;
+ // VA mode value (VA_RC_*).
+ uint32_t va_mode;
+ // Uses bitrate parameters.
+ int bitrate;
+ // Supports maxrate distinct from bitrate.
+ int maxrate;
+ // Uses quality value.
+ int quality;
+ // Supports HRD/VBV parameters.
+ int hrd;
+} VAAPIEncodeRCMode;
+
typedef struct VAAPIEncodeContext {
const AVClass *class;
@@ -146,6 +176,14 @@ typedef struct VAAPIEncodeContext {
// Desired B frame reference depth.
int desired_b_depth;
+ // Explicitly set RC mode (otherwise attempt to pick from
+ // available modes).
+ int explicit_rc_mode;
+
+ // Explicitly-set QP, for use with the "qp" options.
+ // (Forces CQP mode when set, overriding everything else.)
+ int explicit_qp;
+
// Desired packed headers.
unsigned int desired_packed_headers;
@@ -165,6 +203,12 @@ typedef struct VAAPIEncodeContext {
// Chosen encoding profile details.
const VAAPIEncodeProfile *profile;
+ // Chosen rate control mode details.
+ const VAAPIEncodeRCMode *rc_mode;
+ // RC quality level - meaning depends on codec and RC mode.
+ // In CQP mode this sets the fixed quantiser value.
+ int rc_quality;
+
// Encoding profile (VAProfile*).
VAProfile va_profile;
// Encoding entrypoint (VAEntryoint*).
@@ -296,6 +340,10 @@ typedef struct VAAPIEncodeType {
// Codec feature flags.
int flags;
+ // Default quality for this codec - used as quantiser or RC quality
+ // factor depending on RC mode.
+ int default_quality;
+
// Perform any extra codec-specific configuration after the
// codec context is initialised (set up the private data and
// add any necessary global parameters).
@@ -382,5 +430,22 @@ int ff_vaapi_encode_close(AVCodecContext *avctx);
OFFSET(common.desired_b_depth), AV_OPT_TYPE_INT, \
{ .i64 = 1 }, 1, INT_MAX, FLAGS }
+#define VAAPI_ENCODE_RC_MODE(name, desc) \
+ { #name, desc, 0, AV_OPT_TYPE_CONST, { .i64 = RC_MODE_ ## name }, \
+ 0, 0, FLAGS, "rc_mode" }
+#define VAAPI_ENCODE_RC_OPTIONS \
+ { "rc_mode",\
+ "Set rate control mode", \
+ OFFSET(common.explicit_rc_mode), AV_OPT_TYPE_INT, \
+ { .i64 = RC_MODE_AUTO }, RC_MODE_AUTO, RC_MODE_MAX, FLAGS, "rc_mode" }, \
+ { "auto", "Choose mode automatically based on other parameters", \
+ 0, AV_OPT_TYPE_CONST, { .i64 = RC_MODE_AUTO }, 0, 0, FLAGS, "rc_mode" }, \
+ VAAPI_ENCODE_RC_MODE(CQP, "Constant-quality"), \
+ VAAPI_ENCODE_RC_MODE(CBR, "Constant-bitrate"), \
+ VAAPI_ENCODE_RC_MODE(VBR, "Variable-bitrate"), \
+ VAAPI_ENCODE_RC_MODE(ICQ, "Intelligent constant-quality"), \
+ VAAPI_ENCODE_RC_MODE(QVBR, "Quality-defined variable-bitrate"), \
+ VAAPI_ENCODE_RC_MODE(AVBR, "Average variable-bitrate")
+
#endif /* AVCODEC_VAAPI_ENCODE_H */
--
2.19.2
More information about the ffmpeg-devel
mailing list