[FFmpeg-devel] [PATCH 11/13] avformat/matroskadec: Improve read error/EOF checks I
James Almer
jamrial at gmail.com
Tue Jun 25 02:59:13 EEST 2019
On 6/23/2019 8:42 PM, Andreas Rheinhardt wrote:
> ebml_read_num had a number of flaws:
>
> 1. The check for read errors/EOF was totally wrong. E.g. an EBML number
> beginning with the invalid 0x00 would be considered a read error,
> although it is just invalid data.
> 2. The check for read errors/EOF was done just once, after reading the
> first byte of the EBML number. But errors/EOF can happen inbetween, of
> course, and this wasn't checked.
> 3. There was no way to distinguish when EOF should be an error (because
> the data has to be there) for which an error message should be emitted
> and when it is not necessarily an error (namely during parsing of EBML
> IDs). Such a possibility has been added and used.
>
> All this was fixed; furthermore, the error messages for invalid EBML
> numbers were improved and useless initializations were removed.
>
> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt at gmail.com>
> ---
> libavformat/matroskadec.c | 78 +++++++++++++++++++++++----------------
> 1 file changed, 47 insertions(+), 31 deletions(-)
>
> diff --git a/libavformat/matroskadec.c b/libavformat/matroskadec.c
> index f0906675e6..b923a9edff 100644
> --- a/libavformat/matroskadec.c
> +++ b/libavformat/matroskadec.c
> @@ -796,33 +796,30 @@ static int ebml_level_end(MatroskaDemuxContext *matroska)
> * Returns: number of bytes read, < 0 on error
> */
> static int ebml_read_num(MatroskaDemuxContext *matroska, AVIOContext *pb,
> - int max_size, uint64_t *number)
> + int max_size, uint64_t *number, int eof_forbidden)
> {
> - int read = 1, n = 1;
> - uint64_t total = 0;
> + int read, n = 1;
> + uint64_t total;
> + int64_t pos;
>
> - /* The first byte tells us the length in bytes - avio_r8() can normally
> - * return 0, but since that's not a valid first ebmlID byte, we can
> - * use it safely here to catch EOS. */
> - if (!(total = avio_r8(pb))) {
> - /* we might encounter EOS here */
> - if (!avio_feof(pb)) {
> - int64_t pos = avio_tell(pb);
> - av_log(matroska->ctx, AV_LOG_ERROR,
> - "Read error at pos. %"PRIu64" (0x%"PRIx64")\n",
> - pos, pos);
> - return pb->error ? pb->error : AVERROR(EIO);
> - }
> - return AVERROR_EOF;
> - }
> + /* The first byte tells us the length in bytes - except when it is zero. */
> + total = avio_r8(pb);
> + if (pb->eof_reached)
> + goto err;
>
> /* get the length of the EBML number */
> - read = 8 - ff_log2_tab[total];
> - if (read > max_size) {
> - int64_t pos = avio_tell(pb) - 1;
> - av_log(matroska->ctx, AV_LOG_ERROR,
> - "Invalid EBML number size tag 0x%02x at pos %"PRIu64" (0x%"PRIx64")\n",
> - (uint8_t) total, pos, pos);
> + if (!total || (read = 8 - ff_log2_tab[total]) > max_size) {
Keep the read variable assignment in its own line, otherwise it may be
unset inside this statement (i know it will not be checked as is, but
that assumption may stop being true in the future).
Alternatively just set and check both total and read in two separate
statements, same as it was before this patch.
> + pos = avio_tell(pb) - 1;
> + if (!total) {
> + av_log(matroska->ctx, AV_LOG_ERROR,
> + "0x00 at pos %"PRId64" (0x%"PRIx64") invalid as first byte "
> + "of an EBML number\n", pos, pos);
> + } else {
> + av_log(matroska->ctx, AV_LOG_ERROR,
> + "Length %d indicated by an EBML number's first byte 0x%02x "
> + "at pos %"PRId64" (0x%"PRIx64") exceeds max length %d.\n",
> + read, (uint8_t) total, pos, pos, max_size);
> + }
> return AVERROR_INVALIDDATA;
> }
>
> @@ -831,9 +828,29 @@ static int ebml_read_num(MatroskaDemuxContext *matroska, AVIOContext *pb,
> while (n++ < read)
> total = (total << 8) | avio_r8(pb);
>
> + if (pb->eof_reached) {
> + eof_forbidden = 1;
> + goto err;
> + }
> +
> *number = total;
>
> return read;
> +
> +err:
> + pos = avio_tell(pb);
> + if (pb->error) {
> + av_log(matroska->ctx, AV_LOG_ERROR,
> + "Read error at pos. %"PRIu64" (0x%"PRIx64")\n",
> + pos, pos);
> + return pb->error;
> + }
> + if (eof_forbidden) {
> + av_log(matroska->ctx, AV_LOG_ERROR, "File ended prematurely "
> + "at pos. %"PRIu64" (0x%"PRIx64")\n", pos, pos);
> + return AVERROR(EIO);
> + }
> + return AVERROR_EOF;
> }
>
> /**
> @@ -844,7 +861,7 @@ static int ebml_read_num(MatroskaDemuxContext *matroska, AVIOContext *pb,
> static int ebml_read_length(MatroskaDemuxContext *matroska, AVIOContext *pb,
> uint64_t *number)
> {
> - int res = ebml_read_num(matroska, pb, 8, number);
> + int res = ebml_read_num(matroska, pb, 8, number, 1);
> if (res > 0 && *number + 1 == 1ULL << (7 * res))
> *number = EBML_UNKNOWN_LENGTH;
> return res;
> @@ -986,7 +1003,7 @@ static int matroska_ebmlnum_uint(MatroskaDemuxContext *matroska,
> {
> AVIOContext pb;
> ffio_init_context(&pb, data, size, 0, NULL, NULL, NULL, NULL);
> - return ebml_read_num(matroska, &pb, FFMIN(size, 8), num);
> + return ebml_read_num(matroska, &pb, FFMIN(size, 8), num, 1);
> }
>
> /*
> @@ -1033,7 +1050,7 @@ static int ebml_parse(MatroskaDemuxContext *matroska, EbmlSyntax *syntax,
> {
> if (!matroska->current_id) {
> uint64_t id;
> - int res = ebml_read_num(matroska, matroska->ctx->pb, 4, &id);
> + int res = ebml_read_num(matroska, matroska->ctx->pb, 4, &id, 0);
> if (res < 0) {
> // in live mode, finish parsing if EOF is reached.
> return (matroska->is_live && matroska->ctx->pb->eof_reached &&
> @@ -3325,10 +3342,9 @@ static int matroska_parse_block(MatroskaDemuxContext *matroska, AVBufferRef *buf
> uint64_t num;
> int trust_default_duration = 1;
>
> - if ((n = matroska_ebmlnum_uint(matroska, data, size, &num)) < 0) {
> - av_log(matroska->ctx, AV_LOG_ERROR, "EBML block data error\n");
> + if ((n = matroska_ebmlnum_uint(matroska, data, size, &num)) < 0)
> return n;
> - }
> +
Removing the braces is an unnecessary cosmetic change. Try to avoid
these as they just make the diffs longer and harder to read.
> data += n;
> size -= n;
>
> @@ -3650,7 +3666,7 @@ static int webm_clusters_start_with_keyframe(AVFormatContext *s)
> AVPacket *pkt;
> avio_seek(s->pb, cluster_pos, SEEK_SET);
> // read cluster id and length
> - read = ebml_read_num(matroska, matroska->ctx->pb, 4, &cluster_id);
> + read = ebml_read_num(matroska, matroska->ctx->pb, 4, &cluster_id, 1);
> if (read < 0 || cluster_id != 0xF43B675) // done with all clusters
> break;
> read = ebml_read_length(matroska, matroska->ctx->pb, &cluster_length);
> @@ -3868,7 +3884,7 @@ static int webm_dash_manifest_cues(AVFormatContext *s, int64_t init_range)
> // cues_end is inclusive and the above sum is reduced by 1.
> uint64_t cues_length, cues_id;
> int bytes_read;
> - bytes_read = ebml_read_num (matroska, matroska->ctx->pb, 4, &cues_id);
> + bytes_read = ebml_read_num (matroska, matroska->ctx->pb, 4, &cues_id, 1);
> if (bytes_read < 0 || cues_id != (MATROSKA_ID_CUES & 0xfffffff))
> return bytes_read < 0 ? bytes_read : AVERROR_INVALIDDATA;
> bytes_read = ebml_read_length(matroska, matroska->ctx->pb, &cues_length);
>
More information about the ffmpeg-devel
mailing list