[FFmpeg-devel] [PATCH 2/2] libavformat: add WebP demuxer
Steven Liu
lingjiujianke at gmail.com
Wed Jul 8 11:04:18 EEST 2020
Josef Zlomek <josef at pex.com> 于2020年7月8日周三 下午1:28写道：
>
> Fixes: 4907
>
> Adds support for demuxing of animated WebP.
>
> The WebP demuxer splits the input stream into packets containing one frame.
> It also sets the timing information properly.
>
> Signed-off-by: Josef Zlomek <josef at pex.com>
> ---
> Changelog | 1 +
> doc/demuxers.texi | 28 ++++
> libavformat/Makefile | 1 +
> libavformat/allformats.c | 1 +
> libavformat/version.h | 2 +-
> libavformat/webpdec.c | 322 +++++++++++++++++++++++++++++++++++++++
> 6 files changed, 354 insertions(+), 1 deletion(-)
> create mode 100644 libavformat/webpdec.c
>
> diff --git a/Changelog b/Changelog
> index 1e41040a8e..fc0bbdca45 100644
> --- a/Changelog
> +++ b/Changelog
> @@ -6,6 +6,7 @@ version <next>:
> - MacCaption demuxer
> - PGX decoder
> - animated WebP parser/decoder
> +- animated WebP demuxer
>
>
> version 4.3:
> diff --git a/doc/demuxers.texi b/doc/demuxers.texi
> index 3c15ab9eee..9b5932308b 100644
> --- a/doc/demuxers.texi
> +++ b/doc/demuxers.texi
> @@ -832,4 +832,32 @@ which in turn, acts as a ceiling for the size of scripts that can be read.
> Default is 1 MiB.
> @end table
>
> + at section webp
> +
> +Animated WebP demuxer.
> +
> +It accepts the following options:
> +
> + at table @option
> + at item min_delay
> +Set the minimum valid delay between frames in milliseconds.
> +Range is 0 to 60000. Default value is 10.
> +
> + at item max_webp_delay
> +Set the maximum valid delay between frames in milliseconds.
> +Range is 0 to 16777215. Default value is 16777215 (over four hours),
> +the maximum value allowed by the specification.
> +
> + at item default_delay
> +Set the default delay between frames in milliseconds.
> +Range is 0 to 60000. Default value is 100.
> +
> + at item ignore_loop
> +WebP files can contain information to loop a certain number of times (or
> +infinitely). If @option{ignore_loop} is set to 1, then the loop setting
> +from the input will be ignored and looping will not occur. If set to 0,
> +then looping will occur and will cycle the number of times according to
> +the WebP. Default value is 1.
> + at end table
> +
> @c man end DEMUXERS
> diff --git a/libavformat/Makefile b/libavformat/Makefile
> index 26af859a28..93793de45d 100644
> --- a/libavformat/Makefile
> +++ b/libavformat/Makefile
> @@ -557,6 +557,7 @@ OBJS-$(CONFIG_WEBM_MUXER) += matroskaenc.o matroska.o \
> wv.o vorbiscomment.o
> OBJS-$(CONFIG_WEBM_DASH_MANIFEST_MUXER) += webmdashenc.o
> OBJS-$(CONFIG_WEBM_CHUNK_MUXER) += webm_chunk.o
> +OBJS-$(CONFIG_WEBP_DEMUXER) += webpdec.o
> OBJS-$(CONFIG_WEBP_MUXER) += webpenc.o
> OBJS-$(CONFIG_WEBVTT_DEMUXER) += webvttdec.o subtitles.o
> OBJS-$(CONFIG_WEBVTT_MUXER) += webvttenc.o
> diff --git a/libavformat/allformats.c b/libavformat/allformats.c
> index f8527b1fd4..389273ea52 100644
> --- a/libavformat/allformats.c
> +++ b/libavformat/allformats.c
> @@ -455,6 +455,7 @@ extern AVOutputFormat ff_webm_muxer;
> extern AVInputFormat ff_webm_dash_manifest_demuxer;
> extern AVOutputFormat ff_webm_dash_manifest_muxer;
> extern AVOutputFormat ff_webm_chunk_muxer;
> +extern AVInputFormat ff_webp_demuxer;
> extern AVOutputFormat ff_webp_muxer;
> extern AVInputFormat ff_webvtt_demuxer;
> extern AVOutputFormat ff_webvtt_muxer;
> diff --git a/libavformat/version.h b/libavformat/version.h
> index 75c03fde0a..33cebed85e 100644
> --- a/libavformat/version.h
> +++ b/libavformat/version.h
> @@ -32,7 +32,7 @@
> // Major bumping may affect Ticket5467, 5421, 5451(compatibility with Chromium)
> // Also please add any ticket numbers that you believe might be affected here
> #define LIBAVFORMAT_VERSION_MAJOR 58
> -#define LIBAVFORMAT_VERSION_MINOR 48
> +#define LIBAVFORMAT_VERSION_MINOR 49
> #define LIBAVFORMAT_VERSION_MICRO 100
>
> #define LIBAVFORMAT_VERSION_INT AV_VERSION_INT(LIBAVFORMAT_VERSION_MAJOR, \
> diff --git a/libavformat/webpdec.c b/libavformat/webpdec.c
> new file mode 100644
> index 0000000000..8d6e6df9c0
> --- /dev/null
> +++ b/libavformat/webpdec.c
> @@ -0,0 +1,322 @@
> +/*
> + * WebP demuxer
> + * Copyright (c) 2020 Pexeso Inc.
> + *
> + * This file is part of FFmpeg.
> + *
> + * FFmpeg is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2.1 of the License, or (at your option) any later version.
> + *
> + * FFmpeg is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with FFmpeg; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +/**
> + * @file
> + * WebP demuxer.
> + */
> +
> +#include "libavutil/intreadwrite.h"
> +#include "libavutil/opt.h"
> +#include "avformat.h"
> +#include "internal.h"
> +
> +typedef struct WebPDemuxContext {
> + const AVClass *class;
> + /**
> + * Time span in milliseconds before the next frame
> + * should be drawn on screen.
> + */
> + int delay;
> + /**
> + * Minimum allowed delay between frames in milliseconds.
> + * Values below this threshold are considered to be invalid
> + * and set to value of default_delay.
> + */
> + int min_delay;
> + int max_delay;
> + int default_delay;
> +
> + /**
> + * loop options
> + */
> + int total_iter;
> + int iter_count;
> + int ignore_loop;
> +
> + int nb_frames;
> + int remaining_size;
> +} WebPDemuxContext;
> +
> +/**
> + * Major web browsers display WebPs at ~10-15fps when rate is not
> + * explicitly set or have too low values. We assume default rate to be 10.
> + * Default delay = 1000 microseconds / 10fps = 100 milliseconds per frame.
> + */
> +#define WEBP_DEFAULT_DELAY 100
> +/**
> + * By default delay values less than this threshold considered to be invalid.
> + */
> +#define WEBP_MIN_DELAY 10
> +
> +static int webp_probe(const AVProbeData *p)
> +{
> + const uint8_t *b = p->buf;
> +
> + if (p->filename && ff_guess_image2_codec(p->filename)) {
> + if (AV_RB32(b) == MKBETAG('R', 'I', 'F', 'F') &&
> + AV_RB32(b + 8) == MKBETAG('W', 'E', 'B', 'P'))
> + return AVPROBE_SCORE_MAX;
> + }
> +
> + return 0;
> +}
> +
> +static int resync(AVFormatContext *s)
> +{
> + WebPDemuxContext *wdc = s->priv_data;
> + AVIOContext *pb = s->pb;
> + int i;
> + uint64_t state = 0;
> +
> + for (i = 0; i < 12; i++) {
> + state = (state << 8) | avio_r8(pb);
> + if (i == 11) {
> + if ((uint32_t) state == MKBETAG('W', 'E', 'B', 'P'))
> + return 0;
> + i -= 4;
> + }
> + if (i == 7) {
> + if ((state >> 32) != MKBETAG('R', 'I', 'F', 'F')) {
> + i--;
> + } else {
> + uint32_t fsize = av_bswap32(state);
> + if (!(fsize > 15 && fsize <= UINT32_MAX - 10)) {
> + i -= 4;
> + } else {
> + wdc->remaining_size = fsize - 4;
> + }
> + }
> + }
> + if (avio_feof(pb))
> + return AVERROR_EOF;
> + }
> + return 0;
> +}
> +
> +static int webp_read_header(AVFormatContext *s)
> +{
> + WebPDemuxContext *wdc = s->priv_data;
> + AVIOContext *pb = s->pb;
> + AVStream *st;
> + int ret, n;
> + int64_t nb_frames = 0, duration = 0;
> + int width = 0, height = 0;
> + uint32_t chunk_type, chunk_size;
> +
> + ret = resync(s);
> + if (ret < 0)
> + return ret;
> +
> + st = avformat_new_stream(s, NULL);
> + if (!st)
> + return AVERROR(ENOMEM);
> +
> + st->codecpar->width = 0;
> + st->codecpar->height = 0;
> + wdc->delay = wdc->default_delay;
> +
> + while (1) {
> + chunk_type = avio_rl32(pb);
> + chunk_size = avio_rl32(pb);
> + if (chunk_size == UINT32_MAX)
> + return AVERROR_INVALIDDATA;
> + chunk_size += chunk_size & 1;
> + if (avio_feof(pb))
> + break;
> +
> + switch (chunk_type) {
> + case MKTAG('V', 'P', '8', 'X'):
> + avio_skip(pb, 4);
> + width = avio_rl24(pb) + 1;
> + height = avio_rl24(pb) + 1;
> + break;
> + case MKTAG('V', 'P', '8', ' '):
> + avio_skip(pb, 6);
> + width = avio_rl16(pb) & 0x3fff;
> + height = avio_rl16(pb) & 0x3fff;
> + duration += wdc->delay;
> + nb_frames++;
> + avio_skip(pb, chunk_size - 10);
> + break;
> + case MKTAG('V', 'P', '8', 'L'):
> + avio_skip(pb, 1);
> + n = avio_rl32(pb);
> + width = (n & 0x3fff) + 1; /* first 14 bits */
> + height = ((n >> 14) & 0x3fff) + 1; /* next 14 bits */
> + duration += wdc->delay;
> + nb_frames++;
> + avio_skip(pb, chunk_size - 5);
> + break;
> + case MKTAG('A', 'N', 'M', 'F'):
> + avio_skip(pb, 6);
> + width = avio_rl24(pb) + 1;
> + height = avio_rl24(pb) + 1;
> + wdc->delay = avio_rl24(pb);
> + if (wdc->delay < wdc->min_delay)
> + wdc->delay = wdc->default_delay;
> + wdc->delay = FFMIN(wdc->delay, wdc->max_delay);
> + duration += wdc->delay;
> + nb_frames++;
> + avio_skip(pb, chunk_size - 15);
> + break;
> + default:
> + avio_skip(pb, chunk_size);
> + }
> +
> + if (avio_feof(pb))
> + break;
> +
> + if (st->codecpar->width == 0 && width > 0)
> + st->codecpar->width = width;
> + if (st->codecpar->height == 0 && height > 0)
> + st->codecpar->height = height;
> + }
> +
> + /* WebP format operates with time in "milliseconds",
> + * therefore timebase is 1/1000 */
> + avpriv_set_pts_info(st, 64, 1, 1000);
> + st->codecpar->codec_type = AVMEDIA_TYPE_VIDEO;
> + st->codecpar->codec_id = AV_CODEC_ID_WEBP;
> + st->start_time = 0;
> + st->duration = duration;
> + st->nb_frames = nb_frames;
> +
> + /* jump to start because WebP decoder needs header data too */
> + if (avio_seek(pb, 0, SEEK_SET) != 0)
> + return AVERROR(EIO);
> + wdc->remaining_size = 0;
> +
> + return 0;
> +}
> +
> +static int webp_read_packet(AVFormatContext *s, AVPacket *pkt)
> +{
> + WebPDemuxContext *wdc = s->priv_data;
> + AVIOContext *pb = s->pb;
> + int ret;
> + int64_t frame_start = avio_tell(pb), frame_end;
> + uint32_t chunk_type, chunk_size;
> + int is_frame = 0;
> +
> + if (wdc->remaining_size == 0) {
> + ret = resync(s);
> + if (ret == AVERROR_EOF) {
> + if (!wdc->ignore_loop && avio_feof(pb)
> + && (wdc->total_iter < 0 || ++wdc->iter_count < wdc->total_iter))
> + return avio_seek(pb, 0, SEEK_SET);
> + return AVERROR_EOF;
> + }
> + if (ret < 0)
> + return ret;
> +
> + wdc->delay = wdc->default_delay;
> + }
> +
> + while (!is_frame && wdc->remaining_size > 0 && !avio_feof(pb)) {
> + chunk_type = avio_rl32(pb);
> + chunk_size = avio_rl32(pb);
> + if (chunk_size == UINT32_MAX)
> + return AVERROR_INVALIDDATA;
> + chunk_size += chunk_size & 1;
> +
> + if (wdc->remaining_size < 8 + chunk_size)
> + return AVERROR_INVALIDDATA;
> + wdc->remaining_size -= 8 + chunk_size;
> +
> + switch (chunk_type) {
> + case MKTAG('A', 'N', 'I', 'M'):
> + avio_skip(pb, 4);
> + wdc->total_iter = avio_rl16(pb);
> + if (wdc->total_iter == 0)
> + wdc->total_iter = -1;
> + ret = avio_skip(pb, chunk_size - 6);
> + break;
> + case MKTAG('A', 'N', 'M', 'F'):
> + avio_skip(pb, 12);
> + wdc->delay = avio_rl24(pb);
> + if (wdc->delay < wdc->min_delay)
> + wdc->delay = wdc->default_delay;
> + wdc->delay = FFMIN(wdc->delay, wdc->max_delay);
> + wdc->nb_frames++;
> + is_frame = 1;
> + ret = avio_skip(pb, chunk_size - 15);
> + break;
> + case MKTAG('V', 'P', '8', ' '):
> + case MKTAG('V', 'P', '8', 'L'):
> + wdc->nb_frames++;
> + is_frame = 1;
> + /* fallthrough */
> + default:
> + ret = avio_skip(pb, chunk_size);
> + break;
> + }
> +
> + if (ret < 0)
> + return ret;
> + }
> +
> + frame_end = avio_tell(pb);
> +
> + if (avio_seek(pb, frame_start, SEEK_SET) != frame_start)
> + return AVERROR(EIO);
> +
> + ret = av_get_packet(pb, pkt, frame_end - frame_start);
> + if (ret < 0)
> + return ret;
> +
> + pkt->flags |= AV_PKT_FLAG_KEY;
> + pkt->stream_index = 0;
> + pkt->duration = is_frame ? wdc->delay : 0;
> +
> + if (is_frame && wdc->nb_frames == 1) {
> + s->streams[0]->r_frame_rate = (AVRational) {1000, pkt->duration};
> + }
> +
> + return ret;
> +}
> +
> +static const AVOption options[] = {
> + { "min_delay" , "minimum valid delay between frames (in milliseconds)", offsetof(WebPDemuxContext, min_delay) , AV_OPT_TYPE_INT, {.i64 = WEBP_MIN_DELAY} , 0, 1000 * 60, AV_OPT_FLAG_DECODING_PARAM },
> + { "max_webp_delay", "maximum valid delay between frames (in milliseconds)", offsetof(WebPDemuxContext, max_delay) , AV_OPT_TYPE_INT, {.i64 = 0xffffff} , 0, 0xffffff , AV_OPT_FLAG_DECODING_PARAM },
> + { "default_delay" , "default delay between frames (in milliseconds)" , offsetof(WebPDemuxContext, default_delay), AV_OPT_TYPE_INT, {.i64 = WEBP_DEFAULT_DELAY}, 0, 1000 * 60, AV_OPT_FLAG_DECODING_PARAM },
> + { "ignore_loop" , "ignore loop setting" , offsetof(WebPDemuxContext, ignore_loop) , AV_OPT_TYPE_BOOL,{.i64 = 1} , 0, 1 , AV_OPT_FLAG_DECODING_PARAM },
> + { NULL },
> +};
> +
> +static const AVClass demuxer_class = {
> + .class_name = "WebP demuxer",
> + .item_name = av_default_item_name,
> + .option = options,
> + .version = LIBAVUTIL_VERSION_INT,
> + .category = AV_CLASS_CATEGORY_DEMUXER,
> +};
> +
> +AVInputFormat ff_webp_demuxer = {
> + .name = "webp",
> + .long_name = NULL_IF_CONFIG_SMALL("WebP image"),
> + .priv_data_size = sizeof(WebPDemuxContext),
> + .read_probe = webp_probe,
> + .read_header = webp_read_header,
> + .read_packet = webp_read_packet,
> + .flags = AVFMT_GENERIC_INDEX,
> + .priv_class = &demuxer_class,
> +};
> --
> 2.17.1
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel at ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
Great job Josef,
Test file attached.
(base) liuqi05:dash liuqi$ ./ffplay_g test.webp
ffplay version N-98438-g002779180d Copyright (c) 2003-2020 the FFmpeg developers
built with Apple clang version 11.0.3 (clang-1103.0.32.59)
configuration: --quiet --enable-htmlpages --enable-libx264
--enable-libxml2 --enable-gpl --extra-ldflags=-I/usr/local/include
--extra-ldflags=-L/usr/local/lib --enable-libfreetype
--enable-fontconfig --enable-libspeex --enable-libopus --enable-libzmq
--enable-libx265 --enable-libass --enable-videotoolbox
--disable-optimizations --disable-stripping --enable-libmp3lame
--samples=fate-suite/ --cc=clang
libavutil 56. 55.100 / 56. 55.100
libavcodec 58. 95.100 / 58. 95.100
libavformat 58. 49.100 / 58. 49.100
libavdevice 58. 11.101 / 58. 11.101
libavfilter 7. 86.100 / 7. 86.100
libswscale 5. 8.100 / 5. 8.100
libswresample 3. 8.100 / 3. 8.100
libpostproc 55. 8.100 / 55. 8.100
[swscaler @ 0x110be6000] Warning: data is not aligned! This can lead
to a speed loss
Input #0, webp, from 'test.webp':
Duration: 00:00:00.93, start: 0.000000, bitrate: 1315 kb/s
Stream #0:0: Video: webp, yuva420p(tv, bt470bg/unknown/unknown),
422x480, 15 fps, 15.15 tbr, 1k tbn, 1k tbc
Segmentation fault: 11
(base) liuqi05:dash liuqi$
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test.webp
Type: application/octet-stream
Size: 153268 bytes
Desc: not available
URL: <https://ffmpeg.org/pipermail/ffmpeg-devel/attachments/20200708/eb469cf3/attachment.obj>
More information about the ffmpeg-devel
mailing list