[FFmpeg-devel] [PATCH 3/3] libavcodec/qsvenc: Add intra refresh to hevc_qsv and add new intra refresh parameter
Xiang, Haihao
haihao.xiang at intel.com
Tue Jan 25 05:22:03 EET 2022
On Mon, 2022-01-24 at 10:59 +0800, Wenbin Chen wrote:
> Add intra refresh support to hevc_qsv as well.
> Add an new intra refresh type: "horizontal", and an new param
> ref_cycle_dist. This param specify the distance between the
> beginnings of the intra-refresh cycles in frames.
>
> Signed-off-by: Wenbin Chen <wenbin.chen at intel.com>
> ---
> doc/encoders.texi | 26 +++++++++++++++++++++++++-
> libavcodec/qsvenc.c | 23 ++++++++++++++---------
> libavcodec/qsvenc.h | 1 +
> libavcodec/qsvenc_h264.c | 7 +++++--
> libavcodec/qsvenc_hevc.c | 9 +++++++++
> 5 files changed, 54 insertions(+), 12 deletions(-)
>
> diff --git a/doc/encoders.texi b/doc/encoders.texi
> index 6c1c4df57a..4e35e50e4d 100644
> --- a/doc/encoders.texi
> +++ b/doc/encoders.texi
> @@ -3344,7 +3344,8 @@ Specifies intra refresh type. The major goal of intra
> refresh is improvement of
> error resilience without significant impact on encoded bitstream size caused
> by
> I frames. The SDK encoder achieves this by encoding part of each frame in
> refresh cycle using intra MBs. @var{none} means no refresh. @var{vertical}
> means
> -vertical refresh, by column of MBs.
> +vertical refresh, by column of MBs. To enable intra refresh, B frame should
> be
> +set to 0.
>
> @item @var{int_ref_cycle_size}
> Specifies number of pictures within refresh cycle starting from 2. 0 and 1
> are
> @@ -3355,6 +3356,9 @@ Specifies QP difference for inserted intra MBs. This is
> signed value in
> [-51, 51] range if target encoding bit-depth for luma samples is 8 and this
> range is [-63, 63] for 10 bit-depth or [-75, 75] for 12 bit-depth
> respectively.
>
> + at item @var{int_ref_cycle_dist}
> +Distance between the beginnings of the intra-refresh cycles in frames.
> +
> @item @var{profile}
> @table @samp
> @item unknown
> @@ -3463,6 +3467,26 @@ Insert picture timing SEI with pic_struct_syntax
> element.
> @item @var{transform_skip}
> Turn this option ON to enable transformskip. It is supported on platform
> equal
> or newer than ICL.
> +
> + at item @var{int_ref_type}
> +Specifies intra refresh type. The major goal of intra refresh is improvement
> of
> +error resilience without significant impact on encoded bitstream size caused
> by
> +I frames. The SDK encoder achieves this by encoding part of each frame in
> +refresh cycle using intra MBs. @var{none} means no refresh. @var{vertical}
> means
> +vertical refresh, by column of MBs. To enable intra refresh, B frame should
> be
> +set to 0.
> +
> + at item @var{int_ref_cycle_size}
> +Specifies number of pictures within refresh cycle starting from 2. 0 and 1
> are
> +invalid values.
> +
> + at item @var{int_ref_qp_delta}
> +Specifies QP difference for inserted intra MBs. This is signed value in
> +[-51, 51] range if target encoding bit-depth for luma samples is 8 and this
> +range is [-63, 63] for 10 bit-depth or [-75, 75] for 12 bit-depth
> respectively.
> +
> + at item @var{int_ref_cycle_dist}
> +Distance between the beginnings of the intra-refresh cycles in frames.
> @end table
>
> @subsection MPEG2 Options
> diff --git a/libavcodec/qsvenc.c b/libavcodec/qsvenc.c
> index a8d876d6d9..af1529936e 100644
> --- a/libavcodec/qsvenc.c
> +++ b/libavcodec/qsvenc.c
> @@ -267,8 +267,10 @@ static void dump_video_param(AVCodecContext *avctx,
> QSVEncContext *q,
>
> #if QSV_HAVE_CO2
> av_log(avctx, AV_LOG_VERBOSE,
> - "RecoveryPointSEI: %s IntRefType: %"PRIu16"; IntRefCycleSize:
> %"PRIu16"; IntRefQPDelta: %"PRId16"\n",
> - print_threestate(co->RecoveryPointSEI), co2->IntRefType, co2-
> >IntRefCycleSize, co2->IntRefQPDelta);
> + "RecoveryPointSEI: %s IntRefType: %"PRIu16"; IntRefCycleSize:
> %"PRIu16
> + "; IntRefQPDelta: %"PRId16"; IntRefCycleDist: %"PRId16"\n",
> + print_threestate(co->RecoveryPointSEI), co2->IntRefType, co2-
> >IntRefCycleSize,
> + co2->IntRefQPDelta, co3->IntRefCycleDist);
IntRefCycleDist is a member of mfxExtCodingOption3, and was introduced in mfx
version 1.16, so it should be used under QSV_HAVE_CO3 && QSV_VERSION_ATLEAST(1,
16), not QSV_HAVE_CO2.
Thanks
Haihao
>
> av_log(avctx, AV_LOG_VERBOSE, "MaxFrameSize: %d; ", co2->MaxFrameSize);
> #if QSV_HAVE_MAX_SLICE_SIZE
> @@ -865,13 +867,6 @@ static int init_video_param(AVCodecContext *avctx,
> QSVEncContext *q)
>
> #if QSV_HAVE_CO2
> if (avctx->codec_id == AV_CODEC_ID_H264) {
> - if (q->int_ref_type >= 0)
> - q->extco2.IntRefType = q->int_ref_type;
> - if (q->int_ref_cycle_size >= 0)
> - q->extco2.IntRefCycleSize = q->int_ref_cycle_size;
> - if (q->int_ref_qp_delta != INT16_MIN)
> - q->extco2.IntRefQPDelta = q->int_ref_qp_delta;
> -
> if (q->bitrate_limit >= 0)
> q->extco2.BitrateLimit = q->bitrate_limit ?
> MFX_CODINGOPTION_ON : MFX_CODINGOPTION_OFF;
> if (q->mbbrc >= 0)
> @@ -900,6 +895,12 @@ static int init_video_param(AVCodecContext *avctx,
> QSVEncContext *q)
> q->extco2.ExtBRC = q->extbrc ? MFX_CODINGOPTION_ON :
> MFX_CODINGOPTION_OFF;
> if (q->max_frame_size >= 0)
> q->extco2.MaxFrameSize = q->max_frame_size;
> + if (q->int_ref_type >= 0)
> + q->extco2.IntRefType = q->int_ref_type;
> + if (q->int_ref_cycle_size >= 0)
> + q->extco2.IntRefCycleSize = q->int_ref_cycle_size;
> + if (q->int_ref_qp_delta != INT16_MIN)
> + q->extco2.IntRefQPDelta = q->int_ref_qp_delta;
> #if QSV_HAVE_MAX_SLICE_SIZE
> if (q->max_slice_size >= 0)
> q->extco2.MaxSliceSize = q->max_slice_size;
> @@ -973,6 +974,10 @@ static int init_video_param(AVCodecContext *avctx,
> QSVEncContext *q)
> av_log(avctx, AV_LOG_WARNING,
> "Please set max_b_frames(-bf) to 0 to enable P-
> pyramid\n");
> }
> +#endif
> +#if QSV_VERSION_ATLEAST(1, 16)
> + if (q->int_ref_cycle_dist >= 0)
> + q->extco3.IntRefCycleDist = q->int_ref_cycle_dist;
> #endif
> }
>
> diff --git a/libavcodec/qsvenc.h b/libavcodec/qsvenc.h
> index 65f035045c..5fa0b6f5ba 100644
> --- a/libavcodec/qsvenc.h
> +++ b/libavcodec/qsvenc.h
> @@ -195,6 +195,7 @@ typedef struct QSVEncContext {
> int int_ref_type;
> int int_ref_cycle_size;
> int int_ref_qp_delta;
> + int int_ref_cycle_dist;
> int recovery_point_sei;
>
> int repeat_pps;
> diff --git a/libavcodec/qsvenc_h264.c b/libavcodec/qsvenc_h264.c
> index 9f127607b7..bec3633268 100644
> --- a/libavcodec/qsvenc_h264.c
> +++ b/libavcodec/qsvenc_h264.c
> @@ -126,13 +126,16 @@ static const AVOption options[] = {
> { "4x" , NULL, 0, AV_OPT_TYPE_CONST, { .i64 =
> MFX_LOOKAHEAD_DS_4x }, INT_MIN, INT_MAX, VE,
> "look_ahead_downsampling" },
> #endif
>
> - { "int_ref_type", "Intra refresh
> type", OFFSET(qsv.int_ref_type),
> AV_OPT_TYPE_INT, { .i64 = -1 }, -1, UINT16_MAX, VE, "int_ref_type" },
> + { "int_ref_type", "Intra refresh type. B frames should be set to
> 0.", OFFSET(qsv.int_ref_type), AV_OPT_TYPE_INT, { .i64 = -1
> }, -1, UINT16_MAX, VE, "int_ref_type" },
> { "none", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 0 }, .flags = VE,
> "int_ref_type" },
> { "vertical", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 1 }, .flags = VE,
> "int_ref_type" },
> + { "horizontal", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 2 }, .flags =
> VE, "int_ref_type" },
> { "int_ref_cycle_size", "Number of frames in the intra refresh
> cycle", OFFSET(qsv.int_ref_cycle_size), AV_OPT_TYPE_INT, { .i64 =
> -1 }, -1, UINT16_MAX, VE },
> { "int_ref_qp_delta", "QP difference for the refresh
> MBs", OFFSET(qsv.int_ref_qp_delta), AV_OPT_TYPE_INT, {
> .i64 = INT16_MIN }, INT16_MIN, INT16_MAX, VE },
> { "recovery_point_sei", "Insert recovery point SEI
> messages", OFFSET(qsv.recovery_point_sei), AV_OPT_TYPE_INT
> , { .i64 = -1 }, -1, 1, VE },
> -
> +#if QSV_VERSION_ATLEAST(1, 16)
> + { "int_ref_cycle_dist", "Distance between the beginnings of the intra-
> refresh cycles in
> frames", OFFSET(qsv.int_ref_cycle_dist), AV_OPT_TYPE_INT, { .i64 = -1 },
> -1, INT16_MAX, VE },
> +#endif
> { "profile", NULL, OFFSET(qsv.profile), AV_OPT_TYPE_INT, { .i64 =
> MFX_PROFILE_UNKNOWN }, 0, INT_MAX, VE, "profile" },
> { "unknown" , NULL, 0, AV_OPT_TYPE_CONST, { .i64 =
> MFX_PROFILE_UNKNOWN }, INT_MIN, INT_MAX, VE, "profile" },
> { "baseline", NULL, 0, AV_OPT_TYPE_CONST, { .i64 =
> MFX_PROFILE_AVC_BASELINE }, INT_MIN, INT_MAX, VE, "profile" },
> diff --git a/libavcodec/qsvenc_hevc.c b/libavcodec/qsvenc_hevc.c
> index 91a316f9c8..5cac141c4d 100644
> --- a/libavcodec/qsvenc_hevc.c
> +++ b/libavcodec/qsvenc_hevc.c
> @@ -258,6 +258,15 @@ static const AVOption options[] = {
> #if QSV_VERSION_ATLEAST(1, 26)
> { "transform_skip", "Turn this option ON to enable
> transformskip", OFFSET(qsv.transform_skip), AV_OPT_TYPE_INT, {
> .i64 = -1}, -1, 1, VE},
> #endif
> + { "int_ref_type", "Intra refresh type. B frames should be set to
> 0", OFFSET(qsv.int_ref_type), AV_OPT_TYPE_INT, { .i64 = -1
> }, -1, UINT16_MAX, VE, "int_ref_type" },
> + { "none", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 0 }, .flags = VE,
> "int_ref_type" },
> + { "vertical", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 1 }, .flags = VE,
> "int_ref_type" },
> + { "horizontal", NULL, 0, AV_OPT_TYPE_CONST, { .i64 = 2 }, .flags =
> VE, "int_ref_type" },
> + { "int_ref_cycle_size", "Number of frames in the intra refresh
> cycle", OFFSET(qsv.int_ref_cycle_size), AV_OPT_TYPE_INT, { .i64 =
> -1 }, -1, UINT16_MAX, VE },
> + { "int_ref_qp_delta", "QP difference for the refresh
> MBs", OFFSET(qsv.int_ref_qp_delta), AV_OPT_TYPE_INT, {
> .i64 = INT16_MIN }, INT16_MIN, INT16_MAX, VE },
> +#if QSV_VERSION_ATLEAST(1, 16)
> + { "int_ref_cycle_dist", "Distance between the beginnings of the intra-
> refresh cycles in
> frames", OFFSET(qsv.int_ref_cycle_dist), AV_OPT_TYPE_INT, { .i64 = -1 },
> -1, INT16_MAX, VE },
> +#endif
>
> { NULL },
> };
More information about the ffmpeg-devel
mailing list