[FFmpeg-devel] [RFC/PATCH] bitpacked_dec: Optimization for bitpacked_dec decoder performance
James Almer
jamrial at gmail.com
Sat May 6 15:16:51 EEST 2023
On 5/6/2023 9:13 AM, Devin Heitmueller wrote:
> I added some instrumentation via the attached patch. You can see the
> benefits here:
>
> Before=1683378057.243350 After 1683378057.264239
> Before=1683378083.335424 After 1683378083.356440
> Before=1683378089.675400 After 1683378089.696512
> Before=1683378151.792324 After 1683378151.813579
> 21 ms per run
>
> After patch:
> Before=1683378222.167796 After 1683378222.175760
> Before=1683378233.131416 After 1683378233.139326
> Before=1683378243.591895 After 1683378243.599840
> 8 ms per run
>
> Note: this is a different platform than I did the original development
> on, and apparently the improvement on this particular box is only 2.5x
> rather than 4x.
>
> Devin
Can you bench with the START_TIMER and STOP_TIMER macros in timer.h?
Also, define CACHED_BITSTREAM_READER in bitpacked_dec.c before including
git_bits.h and test the actual implementation again, to see if it makes
any difference.
>
>
> On Sat, May 6, 2023 at 7:53 AM Paul B Mahol <onemda at gmail.com> wrote:
>>
>> On Sat, May 6, 2023 at 1:32 PM Lance Wang <lance.lmwang at gmail.com> wrote:
>>
>>> On Sat, May 6, 2023 at 4:58 AM Devin Heitmueller <
>>> devin.heitmueller at ltnglobal.com> wrote:
>>>
>>>> Rework the code a bit to speed up the 10-bit bitpacked decoding
>>>> routine. This is probably about as fast as I can get it without
>>>> switching to assembly language.
>>>>
>>>> Demonstratable with:
>>>>
>>>> ./ffmpeg -f lavfi -i "smptehdbars=size=3840x2160" -c bitpacked -f image2
>>>> -frames:v 1 source.yuv
>>>> ./ffmpeg -f bitpacked -pix_fmt yuv422p10le -s 3840x2160 -c:v bitpacked -i
>>>> source.yuv -pix_fmt yuv422p10le out.yuv
>>>>
>>>> On my development system, it went from 80ms for a 2160p frame
>>>> down to 20ms (i.e. a 4X speedup). Good enough for now, I hope...
>>>>
>>>>
>>> FYI, on my development system, I run two time for the original and modified
>>> version and no obvious difference:
>>> ./ffmpeg -f lavfi -i "smptehdbars=size=3840x2160" -c bitpacked -frames:v 25
>>> source.yuv
>>> time ./ffmpeg -f bitpacked -pix_fmt yuv422p10le -s 3840x2160 -c:v bitpacked
>>> -i source.yuv -pix_fmt yuv422p10le out.yuv
>>> frame= 25 fps=0.0 q=-0.0 Lsize= 810000kB time=00:00:00.96
>>> bitrate=6912000.0kbits/s speed=1.13x
>>>
>>> real 0m0.961s
>>> user 0m1.086s
>>> sys 0m1.360s
>>>
>>> frame= 25 fps=0.0 q=-0.0 Lsize= 810000kB time=00:00:00.96
>>> bitrate=6912000.0kbits/s speed=1.16x
>>>
>>> real 0m0.936s
>>> user 0m1.358s
>>> sys 0m1.350s
>>>
>>> after apply the patch:
>>> frame= 25 fps=0.0 q=-0.0 Lsize= 810000kB time=00:00:00.96
>>> bitrate=6912000.0kbits/s speed=1.14x
>>>
>>> real 0m0.953s
>>> user 0m0.906s
>>> sys 0m1.438s
>>>
>>> frame= 25 fps=0.0 q=-0.0 Lsize= 810000kB time=00:00:00.96
>>> bitrate=6912000.0kbits/s speed=1.17x
>>>
>>> real 0m0.922s
>>> user 0m0.926s
>>> sys 0m1.066s
>>>
>>
>> Only 25 frames?
>> This is flawed.
>>
>>
>>>
>>>
>>>
>>>> Signed-off-by: Devin Heitmueller <dheitmueller at ltnglobal.com>
>>>> ---
>>>> libavcodec/bitpacked_dec.c | 17 +++++++----------
>>>> 1 file changed, 7 insertions(+), 10 deletions(-)
>>>>
>>>> diff --git a/libavcodec/bitpacked_dec.c b/libavcodec/bitpacked_dec.c
>>>> index a1ffef1..96aba27 100644
>>>> --- a/libavcodec/bitpacked_dec.c
>>>> +++ b/libavcodec/bitpacked_dec.c
>>>> @@ -28,7 +28,6 @@
>>>>
>>>> #include "avcodec.h"
>>>> #include "codec_internal.h"
>>>> -#include "get_bits.h"
>>>> #include "libavutil/imgutils.h"
>>>> #include "thread.h"
>>>>
>>>> @@ -65,7 +64,7 @@ static int bitpacked_decode_yuv422p10(AVCodecContext
>>>> *avctx, AVFrame *frame,
>>>> {
>>>> uint64_t frame_size = (uint64_t)avctx->width *
>>>> (uint64_t)avctx->height * 20;
>>>> uint64_t packet_size = (uint64_t)avpkt->size * 8;
>>>> - GetBitContext bc;
>>>> + uint8_t *src;
>>>> uint16_t *y, *u, *v;
>>>> int ret, i, j;
>>>>
>>>> @@ -79,20 +78,18 @@ static int bitpacked_decode_yuv422p10(AVCodecContext
>>>> *avctx, AVFrame *frame,
>>>> if (avctx->width % 2)
>>>> return AVERROR_PATCHWELCOME;
>>>>
>>>> - ret = init_get_bits(&bc, avpkt->data, avctx->width * avctx->height *
>>>> 20);
>>>> - if (ret)
>>>> - return ret;
>>>> -
>>>> + src = avpkt->data;
>>>> for (i = 0; i < avctx->height; i++) {
>>>> y = (uint16_t*)(frame->data[0] + i * frame->linesize[0]);
>>>> u = (uint16_t*)(frame->data[1] + i * frame->linesize[1]);
>>>> v = (uint16_t*)(frame->data[2] + i * frame->linesize[2]);
>>>>
>>>> for (j = 0; j < avctx->width; j += 2) {
>>>> - *u++ = get_bits(&bc, 10);
>>>> - *y++ = get_bits(&bc, 10);
>>>> - *v++ = get_bits(&bc, 10);
>>>> - *y++ = get_bits(&bc, 10);
>>>> + *u++ = (src[0] << 2) | (src[1] >> 6);
>>>> + *y++ = ((src[1] << 4) | (src[2] >> 4)) & 0x3ff;
>>>> + *v++ = ((src[2] << 6) | (src[3] >> 2)) & 0x3ff;
>>>> + *y++ = ((src[3] << 8) | (src[4])) & 0x3ff;
>>>> + src += 5;
>>>> }
>>>> }
>>>>
>>>> --
>>>> 1.8.3.1
>>>>
>>>> _______________________________________________
>>>> ffmpeg-devel mailing list
>>>> ffmpeg-devel at ffmpeg.org
>>>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>>>>
>>>> To unsubscribe, visit link above, or email
>>>> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
>>>>
>>> _______________________________________________
>>> ffmpeg-devel mailing list
>>> ffmpeg-devel at ffmpeg.org
>>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>>>
>>> To unsubscribe, visit link above, or email
>>> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
>>>
>> _______________________________________________
>> ffmpeg-devel mailing list
>> ffmpeg-devel at ffmpeg.org
>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>>
>> To unsubscribe, visit link above, or email
>> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
>
>
>
>
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel at ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
More information about the ffmpeg-devel
mailing list