[FFmpeg-devel] [PATCH] avformat/udp: Select output interfaces for ipv6 multicast
Peter Enderborg
peterend at axis.com
Tue Aug 12 13:59:32 EEST 2025
On 8/6/25 17:28, Rémi Denis-Courmont wrote:
>
> Le 5 août 2025 14:56:18 GMT+07:00, Peter Enderborg <peterend at axis.com> a écrit :
>> This fixes two old TODO's in ipv6 multicast handling.
>> A helper function to iterate over all interfaces added to
>> help join the multicast group on interface if approperite.
>>
>> The default value is IN6ADDR_ANY (::) and it then joins all interfaces
>> that are up and have multicast support. Local address can be
>> specified and then it join ALL interfaces that use that specific
>> local address.
>>
>> Limitations (TODO's)
>> Handling when network configuration is changed. if up/down etc.
>>
>> Signed-off-by: Peter Enderborg <peterend at axis.com>
>> ---
>> libavformat/udp.c | 108 ++++++++++++++++++++++++++++++++++++++--------
>> 1 file changed, 90 insertions(+), 18 deletions(-)
>>
>> diff --git a/libavformat/udp.c b/libavformat/udp.c
>> index 035db785c2..0a981447a5 100644
>> --- a/libavformat/udp.c
>> +++ b/libavformat/udp.c
>> @@ -68,6 +68,13 @@
>> #include "libavutil/thread.h"
>> #endif
>>
>> +#if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6)
>> +#include <sys/types.h>
>> +#include <net/if.h>
>> +#include <sys/ioctl.h>
>> +#include <ifaddrs.h>
>> +#endif
>> +
>> #ifndef IPV6_ADD_MEMBERSHIP
>> #define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
>> #define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
>> @@ -205,6 +212,79 @@ static int udp_set_multicast_ttl(int sockfd, int mcastTTL,
>>
>> return 0;
>> }
>> +#if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6)
>> +static int udp_ipv6_multicast_iterate(int sockfd, struct sockaddr_in6 *addr,
>> + struct sockaddr_in6 *local_addr, int mop, void *logctx)
>> +{
>> + struct in6_addr anyipv6 = IN6ADDR_ANY_INIT;
>> + struct ifaddrs *ifal=NULL,*ife=NULL;
>> + int iindex_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
>> + int membership_changed = 0;
>> +
>> + if (iindex_fd >= 0 && !getifaddrs(&ifal)) {
>> + for(ife=ifal; ife!=NULL; ife=ife->ifa_next) {
>> + if (ife->ifa_addr &&
>> + (ife->ifa_addr->sa_family == AF_INET6) &&
>> + (ife->ifa_flags & IFF_MULTICAST) &&
>> + (ife->ifa_flags & IFF_UP)) {
>> + if ((!memcmp(&local_addr->sin6_addr, &anyipv6, sizeof(struct in6_addr))) ||
>> + (!memcmp(&local_addr->sin6_addr, &((struct sockaddr_in6 *)ife->ifa_addr)->sin6_addr, sizeof(struct in6_addr)))) {
>> + struct ifreq if_req;
>> + strncpy(if_req.ifr_name, ife->ifa_name, IFNAMSIZ);
>> + if (ioctl(iindex_fd, SIOCGIFINDEX, &if_req) != -1) {
>> + struct ipv6_mreq mreq6;
>> + memcpy(&mreq6.ipv6mr_multiaddr, &addr->sin6_addr, sizeof(struct in6_addr));
>> + mreq6.ipv6mr_interface = if_req.ifr_ifindex;
>> + switch (mop) {
>> + case IPV6_JOIN_GROUP:
>> + if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_ADD_MEMBERSHIP, &mreq6, sizeof(mreq6)) == 0) {
>> + membership_changed = 1;
>> + } else {
>> + /* Subscribe for all ipv6 addresses belong to a
>> + interface.It can generate EADDRINUSE but
>> + is accaptable. */
>> + if (errno != EADDRINUSE) {
>> + ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_ADD_MEMBERSHIP)");
>> + goto error;
>> + }
>> + }
>> + break;
>> + case IPV6_LEAVE_GROUP:
>> + if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_DROP_MEMBERSHIP, &mreq6, sizeof(mreq6)) == 0) {
>> + membership_changed = 1;
> You can't leave a group you didn't join and you can't assume that the set of interfaces is constant over time.
Did you read the commit message?
> Besides joining a group on more than one interface is generally a terrible idea, as you would receive the same data multiple time (+ reordering).
It's not a problem. At least not in linux. You will get an EADDRINUSE if
you have another request for the same interface. The problem
occurs when the network topology is changed. Still, it's a better
solution to try with the topology that exist when the application tries
to join. You will get duplicates if multiple network interfaces are
connected to the same network segment, but not in a more
reasonable setup, and you can still narrow it down by using a specific
interface address in that case.
> It makes sense to track interfaces and subscribe to all of them for discovery protocols, but it's way more involved (and less portable) than this.
It make sense to try all interfaces when the application uses ANY
address as input parameter. Without the patch it uses
interface 0, then the linux kernel will fallback to do a rt6_lookup. The
function rt6_lookup fallback selects one interface
based on the routing table. However, the routing table is a function for
sending, not for receiving, and to change routing
tables it requires admin privileges. This will result in that users
without this admin privilege can not access the multicast stream.
>
>> + } else {
>> + /* Unsubscribe for all ipv6 addresses belong to a
>> + interface. Ignore EADDRNOTAVAIL. */
>> + if (errno != EADDRNOTAVAIL) {
>> + ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_DROP_MEMBERSHIP)");
>> + goto error;
>> + }
>> + }
>> + break;
>> + default:
>> + av_log(logctx, AV_LOG_ERROR, "unknown multicast operation\n");
>> + goto error;
>> + }
>> + }
>> + }
>> + }
>> + }
>> + }
>> + freeifaddrs(ifal);
>> + close(iindex_fd);
>> +
>> + if (!membership_changed) {
>> + av_log(logctx, AV_LOG_ERROR, "no valid interfaces found\n");
>> + return AVERROR(EINVAL);
>> + }
>> + return 0;
>> +error:
>> + freeifaddrs(ifal);
>> + close(iindex_fd);
>> + av_log(logctx, AV_LOG_ERROR, "udp_ipv6_multicast_iterate failed\n");
>> + return AVERROR(EINVAL);
>> +}
>> +#endif
>>
>> static int udp_join_multicast_group(int sockfd, struct sockaddr *addr,
>> struct sockaddr *local_addr, void *logctx)
>> @@ -226,15 +306,11 @@ static int udp_join_multicast_group(int sockfd, struct sockaddr *addr,
>> #endif
>> #if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6)
>> if (addr->sa_family == AF_INET6) {
>> - struct ipv6_mreq mreq6;
>> -
>> - memcpy(&mreq6.ipv6mr_multiaddr, &(((struct sockaddr_in6 *)addr)->sin6_addr), sizeof(struct in6_addr));
>> - //TODO: Interface index should be looked up from local_addr
>> - mreq6.ipv6mr_interface = 0;
>> - if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_ADD_MEMBERSHIP, &mreq6, sizeof(mreq6)) < 0) {
>> - ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_ADD_MEMBERSHIP)");
>> - return ff_neterrno();
>> - }
>> + return udp_ipv6_multicast_iterate(sockfd,
>> + (struct sockaddr_in6 *)addr,
>> + (struct sockaddr_in6 *)local_addr,
>> + IPV6_JOIN_GROUP,
>> + logctx);
>> }
>> #endif
>> return 0;
>> @@ -260,15 +336,11 @@ static int udp_leave_multicast_group(int sockfd, struct sockaddr *addr,
>> #endif
>> #if HAVE_STRUCT_IPV6_MREQ && defined(IPPROTO_IPV6)
>> if (addr->sa_family == AF_INET6) {
>> - struct ipv6_mreq mreq6;
>> -
>> - memcpy(&mreq6.ipv6mr_multiaddr, &(((struct sockaddr_in6 *)addr)->sin6_addr), sizeof(struct in6_addr));
>> - //TODO: Interface index should be looked up from local_addr
>> - mreq6.ipv6mr_interface = 0;
>> - if (setsockopt(sockfd, IPPROTO_IPV6, IPV6_DROP_MEMBERSHIP, &mreq6, sizeof(mreq6)) < 0) {
>> - ff_log_net_error(logctx, AV_LOG_ERROR, "setsockopt(IPV6_DROP_MEMBERSHIP)");
>> - return -1;
>> - }
>> + return udp_ipv6_multicast_iterate(sockfd,
>> + (struct sockaddr_in6 *)addr,
>> + (struct sockaddr_in6 *)local_addr,
>> + IPV6_LEAVE_GROUP,
>> + logctx);
>> }
>> #endif
>> return 0;
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel at ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
More information about the ffmpeg-devel
mailing list