[Mplayer-cvslog] CVS: main/etc example.conf,1.57,1.58
Diego Biurrun CVS
syncmail at mplayerhq.hu
Tue Jul 20 20:02:25 CEST 2004
CVS change done by Diego Biurrun CVS
Update of /cvsroot/mplayer/main/etc
In directory mail:/var2/tmp/cvs-serv16586/etc
Modified Files:
example.conf
Log Message:
reorganized, reformatted, explanation improved, typos, wording
Index: example.conf
===================================================================
RCS file: /cvsroot/mplayer/main/etc/example.conf,v
retrieving revision 1.57
retrieving revision 1.58
diff -u -r1.57 -r1.58
--- example.conf 16 Jul 2004 20:31:16 -0000 1.57
+++ example.conf 20 Jul 2004 18:02:22 -0000 1.58
@@ -1,61 +1,69 @@
##
-## MPlayer config file
+## MPlayer configuration file
##
-## This file can be copied to /usr/local/etc/mplayer.conf and/or ~/.mplayer/config .
-## If both exist, the ~/.mplayer/config's settings override the
-## /usr/local/etc/mplayer.conf ones. And, of course command line overrides all.
-## The options are the same as in the command line, but they can be specified
-## more flexibly here. See below.
+## Configuration files are read system-wide from /usr/local/etc/mplayer.conf
+## and per user from ~/.mplayer/config, where per-user settings override
+## system-wide settings, all of which are overrriden by the command line.
##
+## The options are the same as on the command line.
+##
+
+
+##
+## video settings
+##
+
+# Specify default video driver (see -vo help for a list).
+# vo=xv
-# vo=xv # To specify default video driver (see -vo help for
- # list)
+# Specify default audio driver (see -ao help for a list).
+# ao=oss
-# ao=oss # To specify default audio driver (see -ao help for
- # list)
+# fullscreen mode
+# fs=yes
-fs=yes # Enlarges movie window to your desktop's size.
- # Used by drivers: all
+# Change to a different videomode when going fullscreen
+# (dga, x11, sdl video output drivers only).
+# vm=no
-# vm=no # Tries to change to a different videomode
- # Used by drivers: dga2, x11, sdl
+# Force changing display depth (valid settings are: 0, 15, 16, 24, 32).
+# May need 'vm=yes' as well, only works with fbdev, dga, svga, vesa
+# video output drivers.
+# bpp=0
-# bpp=0 # Force changing display depth.
- # Valid settings are: 0, 15, 16, 24, 32
- # may need 'vm=yes' too.
- # Used by drivers: fbdev, dga2, svga, vesa
+# Enable software scaling (powerful CPU needed).
+# Some video output drivers (svga, x11, vesa) do not support hardware scaling.
+# zoom=no
-# zoom=no # Enable software scaling (powerful CPU needed)
- # Used by drivers: svga, x11, vesa
+# Doublebuffering can help remove flicker from subtitles/OSD.
+# double=yes
-# double=yes # use double-buffering (recommended for xv with
- # SUB/OSD usage)
+# standard monitor size, with square pixels
+# monitoraspect=4:3
-# monitoraspect=4:3 # standard monitor size, with square pixels
-# monitoraspect=16:9 # use this for widescreen monitor! non-square pixels
+# Use this for a widescreen monitor, non-square pixels.
+# monitoraspect=16:9
-# ontop=yes # Makes the player window stay ontop
- # Used by drivers which use X11, except SDL,
- # as well as directx and gl2 under Windows
+# Makes the player window stay on top of all other windows.
+# ontop=yes
##
## Specify your preferred default skin here
## (skins are searched in /usr/local/share/mplayer/Skin/yourskin
## and ~/.mplayer/Skin/yourskin)
##
-
# skin = default
##
## Multiple languages are available :)
##
## Hungarian igen nem
-## English yes no
-## German ja nein
-## Spanish si no
-## Polish tak nie
-## Swedish ja nej
-## Binary 1 0
+## English yes no
+## German ja nein
+## Spanish si no
+## Polish tak nie
+## Swedish ja nej
+## Binary 1 0
##
## You can also use spaces and/or tabs.
##
@@ -71,68 +79,86 @@
## 1 narrow black outline
## 10 bold black outline
##
-
# ffactor = 0.75
##
-## FBdev driver:
+## FBdev driver:
+##
+# framebuffer device to use
+# fb = /dev/fb0
+#
+# mode to use (read from fb.modes)
+# fbmode = 640x480-120
+#
+# location of the fb.modes file
+# fbmodeconfig = /etc/fb.modes
-# fb = /dev/fb0 # framebuffer device to use
-# fbmode = 640x480-120 # use this mode (read from fb.modes!)
-# fbmodeconfig = /etc/fb.modes # the fb.modes file
-
-## VESA and FBdev driver: specify your monitor's timings
-##
-## (see for example /etc/X11/XF86Config for timings!)
+## VESA and FBdev driver: Specify your monitor's timings.
+##
+## (see /etc/X11/XF86Config for timings)
## ** CAUTION! IF YOUR DISPLAY DOESN'T SUPPORT AUTOMATICALLY TURNING OFF WHEN
## OVERDRIVED (AND EVEN IF IT DOES), THIS MAY CAUSE DAMAGE TO YOUR DISPLAY!
## WE AREN'T RESPONSIBLE, IT'S YOUR DECISION! **
##
-## k, K : means multiply by 1000
-## m, M : means multiply by 1.000.000
+## k, K: means multiply by 1000
+## m, M: means multiply by 1.000.000
##
-# monitor-hfreq = 31.5k-50k,70k # horizontal frequency range
-# monitor-vfreq = 50-90 # vertical frequency range
-# monitor-dotclock = 30M-300M # dotclock (or pixelclock) range
+# horizontal frequency range
+# monitor-hfreq = 31.5k-50k,70k
+#
+# vertical frequency range
+# monitor-vfreq = 50-90
+#
+# dotclock (or pixelclock) range
+# monitor-dotclock = 30M-300M
##
## SDL driver
##
-
-# vo = sdl:aalib # use SDL video driver by default
- # use "vo = sdl:aalib" or "vo sdl:dga" and so on,
- # for specifying SDL subdrivers
-# ao = sdl:esd # use SDL audio driver by default
- # use "ao = sdl:esd" to use SDL's ESD driver
-# noxv = no # whether to use XVideo hardware acceleration or not
-# forcexv = yes # force XVideo even if not detected
+# Use SDL video with the aalib subdriver by default.
+# vo = sdl:aalib
+#
+# Use SDL audio driver with the esd subdriver by default.
+# ao = sdl:esd
+#
+# Turn off XVideo hardware acceleration.
+# noxv = no
+#
+# Force XVideo even if not detected.
+# forcexv = yes
##
## Other (preferred to be default from configfile) switches
##
+# Drop frames to preserve audio/video sync.
+framedrop = yes
-framedrop = yes # drop frames, when not in sync (slow CPU, videocard,
- # etc)
+##
+## cache settings
+##
+# Use 8MB input cache by default.
+cache = 8192
+#
+# Prefill 20% of the cache before starting playback.
+cache_min = 20.0
+#
+# Prefill 5% of the cache before restarting playback after the cache emptied.
+cache_prefill = 5.0
-cache = 8192 # use 8Mb input cache by default
-cache_min = 20.0 # Prefill 20% of the cache before initially playing
-cache_prefill = 5.0 # Prefill 5% of the cache before restarting playback if it empties
+# DVD: Display English subtitles if available.
+# slang = en
-# slang = en # DVD : display english subtitles if available
-# alang = en # DVD : play english audio tracks if available
+# DVD: Play English audio tracks if available.
+# alang = en
## This is the correct way to use "subconfig" type options in the
-## configuration file. In the command line you use :
-## -aop list=resample:fout=44100 , but here it is :
+## configuration file. In the command line you use:
+## -aop list=resample:fout=44100 , but here it is:
# aop=list=resample:fout=44100
##
## You can also include other configfiles
-## Specify full path!
-##
-## Delete this default :)
##
-
-include = /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...
+#include = /path/to/the/file/you/want/to/include
More information about the MPlayer-cvslog
mailing list