[MPlayer-dev-eng] MPlayer on IRIX build

[mplayer.development at graphicscave.com]

Some answers you requested.
(Please note that I am brand new on this mailinglist and just starting to 
look into the mplayer development at all.)

> > Things to note about mplayer on IRIX:
> > - Video output on x11 seems to be not supported. The error "RGB32 not
> > supported on big-endian systems, please contact the developers. FATAL:
> > Cannot initialize video driver!" is shown
>
> Please investigate why this happens. And/or provide more, and verbose (-v)
> logs. Try using the -bpp option, change bit depth, etc.

Well. SGI systems are big-endian, unlike Intell systems which are 
little-endian. The error message seems quite clear to me: like there is no 
support build for that in mplayer yet.
However more verbose output when starting mplayer with "mplayer -vo x11 -ao 
null -v full_1227.mpg" are provided in the attached "debug.txt" file. I tried 
switching with -bpp 8, 16, 24 and 32 but they gave the same results.

I am playing this on my SGI o2 r5000 with 128MB ram. I'm not in the lucky 
position of owning a high-profile Octane r12k or something like that. 
Donations are welcome though ;-)
But until then, this o2 is going to be available for mplayer development :-)

> > - Only video outputs on the screen that are left then are gl and gl2
> > (OpenGL outputs) which are extremely slow.
>
> Why does it happen?

I don't understand the question.

> > - Audio output using "-ao sgi": everything initialises fine. "Start
> > playing..." appears. Then immediately *crash* with error: "MPlayer
> > interrupted by signal 11 in module: decode_audio. (the other available
> > -ao option "mpegpes" gives error "couldn't open/init audio device -> no
> > sound"
>
> Please use gdb to debug this. See bugreports.html for instructions.

I will look into this. Will report back on this later on when I have more 
info.

> Are you not subscribed here?

I am now :-)

About that: I didn't find a direct link to the core development team, I 
suppose they are all on this list and filter out the important updates?
And are there "not done" things on this list I should know about? I am brand 
new here and just getting into this development stuff. But I'm quite the SGI 
freak and as a DVD freak crazy about mplayer, and as a student technical 
computer science AND a software engineer as profession, I realy enjoy hacking 
away in this mountain of code :-)

Best regards,

Steffen Boelaars
-------------- next part --------------


MPlayer 0.90pre10-3.0.4 (C) 2000-2002 Arpad Gereoffy (see DOCS)

Reading /usr/people/whiter/.mplayer/codecs.conf: can't open '/usr/people/whiter/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: 44 audio & 110 video codecs
CommandLine: '-vo' 'x11' '-ao' 'null' '-v' 'full_1227.mpg'
get_path('font/font.desc') -> '/usr/people/whiter/.mplayer/font/font.desc'
font: can't open file: /usr/people/whiter/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Unoptimized OnScreenDisplay
Using usleep() timing
get_path('input.conf') -> '/usr/people/whiter/.mplayer/input.conf'
Can't open input config file /usr/people/whiter/.mplayer/input.conf : No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf : No such file or directory
Falling back on default (hardcoded) input config

Playing full_1227.mpg
Not an URL!
File size is 153476960 bytes
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 102965a0  
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 102965a0  
Checking for NuppelVideo
DEMUXER: freeing demuxer at 102965a0  
Checking for MOV
DEMUXER: freeing demuxer at 102965a0  
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 102965a0  
Checking for REAL
DEMUXER: freeing demuxer at 102965a0  
DEMUXER: freeing demuxer at 102965a0  
DEMUXER: freeing demuxer at 102965a0  
DEMUXER: freeing demuxer at 102965a0  
DEMUXER: freeing demuxer at 102965a0  
Checking for SMJPEG
DEMUXER: freeing demuxer at 102965a0  
Checking for PVA
DEMUXER: freeing demuxer at 10296e08  
system stream synced at 0xB (11)!
==> Found video stream: 0
Detected MPEG-PS file format!
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO:  MPEG1  384x288  (aspect 8)  25.00 fps  1635.0 kbps (204.4 kbyte/s)
[V] filefmt:2  fourcc:0x10000001  size:384x288  fps:25.00  ftime:=0.0400
get_path('sub/') -> '/usr/people/whiter/.mplayer/sub/'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
init layer2&3 finished, tables done
mp3lib: using generic C decore!

MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, 16 bit (0x20), ratio: 28000->176400 (224.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
X11 opening display: :0.0
vo: X11 color mask:  FFFFFF  (R:FF G:FF00 B:FF0000)
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 384 x 288 (preferred csp: Mpeg PES)
Couldn't find matching colorspace - retrying with -vop scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Sorry, selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
libmpeg2: No accelerated IDCT transform found
libmpeg2: No accelerated motion compensation found
VDec: vo config request - 384 x 288 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO Config (384x288->384x288,flags=0,'MPlayer',0x32315659)
VO: [x11] 384x288 => 384x288 Planar YV12 
VO: Description: X11 ( XImage/Shm )
VO: Author: Aaron Holtzman <aholtzma at ess.engr.uvic.ca>
Sharing memory.
No accelerated colorspace conversion found
SwScaler: using unscaled Planar YV12 -> BGR 32-bit special converter
RGB32 not supported on big-endian systems, please contact the developers
FATAL: Cannot initialize video driver!
VDecoder init failed :(
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffmpeg12] vfm:ffmpeg (FFmpeg MPEG 1/2)
==========================================================================
AO: [null] 44100Hz 2ch Signed 16-bit (Big-Endian)
AO: Description: Null audio output
AO: Author: Tobias Diedrich
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
Adding filter dummy 
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000020 and bps = 2
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000020 and bps = 2
Start playing...
VDec: vo config request - 384 x 288 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO Config (384x288->384x288,flags=0,'MPlayer',0x32315659)
VO: [x11] 384x288 => 384x288 Planar YV12 
VO: Description: X11 ( XImage/Shm )
VO: Author: Aaron Holtzman <aholtzma at ess.engr.uvic.ca>
RGB32 not supported on big-endian systems, please contact the developers
FATAL: Cannot initialize video driver!
get_buffer() failed
Error while decoding frame!

FATAL: Couldn't initialize video filters (-vop) or video output (-vo)!
init_vo failed
Error while decoding slice

Uninit audio filters...
uninit audio: mp3lib  
uninit video: ffmpeg  
DEMUXER: freeing demuxer at 10296e08  
DEMUXER: freeing sh_audio at 1028b978  
DEMUXER: freeing sh_video at 1028b858  
vo: uninit ...

Exiting... (End of file)