[Mplayer-users] can't play VCDs

[Max Hofer]

i have a SVCD in bin/cue format. i can play the whole thing as bin file on my
HD. i can burn the pure bin/file (not as SVCD - just the data) to a CD and play
it from there, but as soon i burn the bin/cue file to SVCD (i have the same
problem also with normal VCDs) i can't play it anymore. Video goes in slow
motion, audio has hiccups. Compraing the two outputs (playing the bin file and
then plaiyng the vcd) i noticed only 2 difference.
------here the output playing the VCD-----------
CommandLine: '-v' '-nofs' '-vcd' '1'
Reading /home/max/.mplayer/codecs.conf: 15 audio & 32 video codecs
Font /home/max/.mplayer/font/font.desc loaded successfully! (138 chars)
track 01:  adr=1  ctrl=4  format=2  00:02:00  mode: 1
track 02:  adr=1  ctrl=4  format=2  00:08:00  mode: 1
VCD start byte position: 0x551B8  end: 0x1546E0
ASF_check: not ASF guid!
system stream synced at 0x1546ED (1394413)!
==> Found video stream: 0
Detected MPEG-PS file format!
==> Found audio stream: 0
detected MPG-PS audio format: 1
Searching for sequence header... OK!
mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse
libmpeg2: Using MMX for IDCT transform
libmpeg2: Using MMX for motion compensation
mpeg bitrate: 5875 (16F3)
VIDEO:  MPEG2  480x480  (aspect 2)  29.97 fps  2937.5 kbps (367.2 kbyte/s)
[V] filefmt:2  fourcc:0x10000001  size:480x480  fps:29.97  ftime:=0.0334
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Initializing audio codec...
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: Processor ID: 660
mp3lib: Using Pentium-MMX optimized decore.
AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 28000->176400
Detected video codec: [mpeg12] drv:1 (MPEG 1 or 2)
vo_debug: query(Planar YV12) returned 0x1
vo_debug1: out_fmt=Planar YV12
vo_debug2: out_fmt=Planar YV12
VO: [xmga] 480x480 => 480x480 Planar YV12 
VO: Description: X11 (Matrox G200/G400 overlay in window using /dev/mga_vid)
VO: Author: Zoltan Ponekker <pontscho at makacs.poliod.hu>
video_out->init(480x480->480x480,flags=0,'MPlayer',0x32315659)
vo_debug3: out_fmt=Planar YV12
vo: X11 color mask:  FFFF  (R:F800 G:7E0 B:1F)
vo: X11 running at 1280x1024 depth: 16 (":0.0" => local display)
Disabling DPMS
stat: 1
INFO: Video OUT driver init OK!
AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
ao2: 44100 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed
16-bit (Little-Endian))
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags:   2/2  (32768 bytes/frag)  free:  65536
Start playing...

-------------------------------------------
differences:
1)
bin: system stream synced at 0xD (13)!
vcd: system stream synced at 0x1546ED (1394413)!

2) strange value for CPU usage for audio
A:   5.8 (   5.6)  V:   1.9  A-V:  3.381 ct:  0.087   37  38%  0% 782.1% 25 
-------------------------------------------
video was still in slow motion playing with -nosound. Playing the VCD with -vo
null didn't change anything for the audio (still hiccups). During i play the
VCD i have a CPU idle time of 80%. Playing the bin file i have 50% idle time. 
Playing the file as bin file gives me an idle time around 50%.

My bus system can't be too slow. if not i could not play the file from CD when
i burn the bin file to CD.

Till now i was not able to play 1 single (S)VCD with mplayer. did anyone else
have the same experiences? what do i wrong?


__________________________________________________________________
Do You Yahoo!?
Gesendet von Yahoo! Mail - http://mail.yahoo.de

_______________________________________________
Mplayer-users mailing list
Mplayer-users at lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/mplayer-users