[Mplayer-users] MPlayer's speed!

Mike Komarovsky zombie at ip.portal.ru
Thu Jul 5 19:38:17 CEST 2001 

On Wed, 4 Jul 2001, Mike Komarovsky wrote:

Hi,
The root of my problem that whereis no info on 'make dep' after executing
configure, just 'make'.
After usual 'make dep;make' all my problems gone.  

>On Wed, 4 Jul 2001, Arpi wrote:
>
>>Hi,
>>
>>> >try option -ni
>>> >it may help for the 'too many packets in demuxer buffer...' problem.
>>> >
>>> Well, I tried but this option does nothing for this situation and I got the same
>>> dramatical slowdown of playback speed.
>>> May be mplayer's output will tell you something:
>>> 
>>> MPlayer 0.17cvs-010704-09:58(C) 2000-2001 Arpad Gereoffy <arpi at thot.banki.hu>
>>> 
>>> Reading /root/.mplayer/codecs.conf: 2 audio & 26 video codecs
>>> Font /root/.mplayer/font/font.desc loaded successfully! (117 chars)
>>> Detected AVI file format!
>>> ==> Found video stream: 0
>>> ==> Found audio stream: 1
>>> Detected NON-INTERLEAVED AVI file-format!
>>> VIDEO:  [DIV3]  356x240  24bpp  30.00 fps  335.5 kbps (41.0 kbyte/s)
>>> [V] filefmt:3  fourcc:0x33564944  size:356x240  fps:30.00  ftime:=0.0333
>>> Found audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
>>> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
>>> mp3lib: Processor ID: 631
>>> mp3lib: Using AMD 3dnow-dsp(k7)! optimized decore.
>>> AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 10000->176400
>>> Found video codec: [divxds] drv:4 (DivX ;-) (MS MPEG-4 v3))
>>> Loading DLL: /usr/lib/win32/divx_c32.ax  OK
>>> Using DirectShow codec: divx_c32.ax
>>> DShow: using YUY2 colorspace
>>> DivX setting result = 0
>>> VO: [sdl] 356x240 => 356x240 Packed YUY2 
>>> VO: Description: SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
>>> VO: Author: Ryan C. Gordon <icculus at lokigames.com>, Felix Buenemann 
>>> <atmosfear at users.sourceforge.net>
>>> SDL: Using driver: x11
>>> AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian)
>>> AO: Description: OSS/ioctl audio output
>>> AO: Author: A'rpi
>>> ao2: 44100 Hz  2 chans  Signed 16-bit (Little-Endian)
>>> audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
>>> audio_setup: using 44100 Hz samplerate (requested: 44100)
>>> audio_setup: frags:  16/16  (4096 bytes/frag)  free:  65536
>>> Initial frame delay  A: 1  V: 0
>>> Start playing...
>>> A: 183.4 ( 183.4)  V:   0.1  A-V:183.319 ct:  0.000    2   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.1  A-V:183.286 ct:  0.003    3   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.1  A-V:183.253 ct:  0.007    4   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.2  A-V:183.219 ct:  0.010    5   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.2  A-V:183.186 ct:  0.013    6   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.2  A-V:183.153 ct:  0.017    7   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.3  A-V:183.119 ct:  0.020    8   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.3  A-V:183.086 ct:  0.023    9   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.3  A-V:183.053 ct:  0.027   10   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.4  A-V:183.019 ct:  0.030   11   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.4  A-V:182.986 ct:  0.033   12   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.4  A-V:182.953 ct:  0.037   13   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.5  A-V:182.919 ct:  0.040   14   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.5  A-V:182.886 ct:  0.043   15   0%  0%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.5  A-V:182.853 ct:  0.047   16   1%  1%  0.0% 0
>>> A: 183.4 ( 183.4)  V:   0.6  A-V:182.819 ct:  0.050   17   1%  1%  0.0% 0
>>> Exiting... (Quit)
>>> 
>
>Hi,
>I have the same result with 18pre3 compiled on Redhat 7.1 with upgraded
>2.96 compiler...thought the problem came from compiler... -bps and
>framedrop disabling gives no cure, same results. I can post output if
>someone wants.
>
>>> What are these strange and big values - 183.4?
>>Ehh. I dunno, never seen such thing before ;(
>>A-V should be 0, except it means delay.
>>
>>Maybe intial value of a_frame, v_frame, d_audio->ptr or d_video->pts isn't set to zero?
>>(it was, but maybe some 'cleanups' killed it)
>>
>>Try some things:
>>1. try with -ni -bps
>>2. try with -vo null  (and check the A-V value)
>>3. try with -nosound  (is it 30fps then?)
>>4. disable framedrop, i'm interested in result
>>5. send me (upload to ftp) -v -v output.
>>6. try to find which version (CVS date) is first broken
>>
>>
>>A'rpi / Astral & ESP-team
>>
>>--
>>mailto:arpi at thot.banki.hu
>>http://esp-team.scene.hu
>>
>>_______________________________________________
>>Mplayer-users mailing list
>>Mplayer-users at lists.sourceforge.net
>>http://lists.sourceforge.net/lists/listinfo/mplayer-users
>>
>Regards,
>.зОМБи.
>zombieatipdotportaldotru
>
>
>_______________________________________________
>Mplayer-users mailing list
>Mplayer-users at lists.sourceforge.net
>http://lists.sourceforge.net/lists/listinfo/mplayer-users
>

.зОМБи.
zombie_at_ip_portal_ru


_______________________________________________
Mplayer-users mailing list
Mplayer-users at lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/mplayer-users

More information about the MPlayer-users mailing list