[MPlayer-users] mencvcd errors...

Brendan Dolan-Gavitt brendandg at colby.tjs.org
Fri Jul 26 18:29:01 CEST 2002


So far, I've had absolutely zero luck getting mencvcd to work. To test it
out, I've been trying to get mencvcd to encode a single MPEG1 video file
(I'll play with getting separate vcd tracks later...) However, no matter
what source file I use, I get the same error, and the only files produced
are a 20k mpeg audio file and a named pipe. Attached is a log produced by
running:

sh mencvcd test01 /home/moyix/anime/kenshin/kenshin_tv_55.mpg &> ~/output.log

Thanks,
 Brendan D-G
-------------- next part --------------
   INFO: [yuvscaler] yuvscaler (version 1.6.0) is a general scaling utility for yuv frames
   INFO: [yuvscaler] (C) 2001 Xavier Biquard <xbiquard at free.fr>
   INFO: [yuvscaler] yuvscaler -h for help, or man yuvscaler


MPlayer CVS-020726-10:06-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Family: 6, Stepping: 2)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading /home/moyix/.mplayer/codecs.conf: 36 audio & 103 video codecs
CommandLine:get_path('font/font.desc') -> '/home/moyix/.mplayer/font/font.desc'
 '-noframedrop' '-vo' 'yuv4mpeg' '-ao' 'pcm' '-waveheader' '-v' '-osdlevel' '0' '/home/moyix/anime/kenshin/kenshin_tv_55.mpg'
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Font /home/moyix/.mplayer/font/font.desc loaded successfully! (138 chars)
Linux RTC init error: Permission denied
Using usleep() timing
get_path('input.conf') -> '/home/moyix/.mplayer/input.conf'
Can't open input config file /home/moyix/.mplayer/input.conf : No such file or directory
Can't open input config file /etc/mplayer/input.conf : No such file or directory
Falling back on default (hardcoded) input config

Playing /home/moyix/anime/kenshin/kenshin_tv_55.mpg
Not an URL!
File size is 270456524 bytes
DEMUXER: freeing demuxer at 0x82803a0  
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x82815e8  
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x82815e8  
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x82815e8  
Checking for MOV
DEMUXER: freeing demuxer at 0x82815e8  
Checking for VIVO
header block 1 size: 73
DEMUXER: freeing demuxer at 0x82815e8  
Checking for REAL
DEMUXER: freeing demuxer at 0x82815e8  
DEMUXER: freeing demuxer at 0x82815e8  
DEMUXER: freeing demuxer at 0x82815e8  
DEMUXER: freeing demuxer at 0x82815e8  
DEMUXER: freeing demuxer at 0x82815e8  
DEMUXER: freeing demuxer at 0x82815e8  
system stream synced at 0x1018F (0)!
==> Found video stream: 0
Detected MPEG-PS file format!
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO:  MPEG1  352x240  (aspect 12)  29.97 fps  1437.5 kbps (179.7 kbyte/s)
[V] filefmt:2  fourcc:0x10000001  size:352x240  fps:29.97  ftime:=0.0334
get_path('sub/') -> '/home/moyix/.mplayer/sub/'
Detected audio codec: [mp3] afm:1 (mp3lib MPEG layer-2, layer-3)
Initializing audio codec...
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using MMX optimized decore!

MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 28000->176400 (224.0 kbit)
==========================================================================
vo_yuv4mpeg: Using (default) progressive frame mode
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)  
vo_debug: query(Mpeg PES) returned 0x0 (i=0) 
Couldn't find matching colorspace - retrying with -vop scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
vo_debug: query(Mpeg PES) returned 0x0 (i=0) 
Sorry, selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)  
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
vo_debug: query(Planar YV12) returned 0x407 (i=0) 
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
video_out->init(352x240->352x264,flags=0,'MPlayer',0x32315659)
VO: [yuv4mpeg] 352x240 => 352x264 Planar YV12 
VO: Description: yuv4mpeg output for mjpegtools (to "stream.yuv")
VO: Author: Robert Kesterson <robertk at robertk.com>
++ WARN: [yuvscaler] Could not infer norm (PAL/SECAM or NTSC) from input data (frame size=352x240, frame rate=29969999:1000000 fps)!!
**ERROR: [yuvscaler] No norm specified, cannot determine VCD output size. Please use the -n option!
**ERROR: [mpeg2enc] Could not read YUV4MPEG2 header: system error (failed read/write)!
Detected video codec: [mpeg12] vfm:1 (MPEG 1 or 2)
==========================================================================
AO: [pcm] 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: Description: RAW PCM/WAVE file writer audio output
AO: Author: Atmosfear
Start playing...
PCM: File: audiodump.wav (WAVE)
PCM: Samplerate: 44100Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
PCM: Info: fastest dumping is achieved with -vo null -hardframedrop.
PCM: Info: to write WAVE files use -waveheader (default); for RAW PCM -nowaveheader.
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A:   1.1 V:   0.9 A-V:  0.252 ct:  0.000    1/  1   0%  0%  0.0% 1 0 0%
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
[1]-  Broken pipe             mplayer -noframedrop -vo yuv4mpeg -ao pcm -waveheader -v -osdlevel 0 $sub $params
++ WARN: [mp2enc] File length according data tag: 44
++ WARN: [mp2enc] File length according RIFF tag: 8
++ WARN: [mp2enc] Inconsistency is inevitable if wav's are being piped
   INFO: [mp2enc] Opened WAV file, freq = 44100 Hz, channels = 2, bits = 16
   INFO: [mp2enc] format = 0x1, audio length = 0 bytes
   INFO: [mp2enc] slots/frame = 731
   INFO: [mp2enc] frac SpF=0.429, tot bitrate=224 kbps, s freq=44.1 kHz
   INFO: [mp2enc] Fractional number of slots, padding required
   INFO: [mp2enc] System is little endian
   INFO: [mp2enc] Avg slots/frame = inf; b/smp = inf; br = inf kbps
   INFO: [mp2enc] Encoding with psychoacoustic model 2 is finished
   INFO: [mp2enc] The MPEG encoded output file name is "test01.mpa"


More information about the MPlayer-users mailing list