[MPlayer-users] gui.conf writing problem

[WK]

I use last cvs version with gui.
Playlist works ok, but everytime I start mplayer I have to remove gui.conf 
first cause mplayer writes itselves settings wrong (decimal instead ratio). 
Output looks that:
MPlayer CVS-020729-06:00-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
CPU: Advanced Micro Devices Athlon TB Thunderbird (Family: 6, Stepping: 2)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
Reading config file: 
/home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: No such file or 
directory
vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local 
display)
Reading /root/.mplayer/codecs.conf: 36 audio & 103 video codecs
Using Linux's hardware RTC timing (1024Hz)
Input config file /root/.mplayer/input.conf parsed : 50 binds
[cfg] read config file: /root/.mplayer/gui.conf
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,000000
/root/.mplayer/gui.conf(4): vo_panscan
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,500000
/root/.mplayer/gui.conf(20): ao_extra_stereo_coefficient
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,000000
/root/.mplayer/gui.conf(21): ao_delay
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 1,010000
/root/.mplayer/gui.conf(28): font_factor
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 4,000000
/root/.mplayer/gui.conf(31): equ_band_00
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 1,000000
/root/.mplayer/gui.conf(32): equ_band_01
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 2,000000
/root/.mplayer/gui.conf(33): equ_band_02
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 3,000000
/root/.mplayer/gui.conf(34): equ_band_03
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 4,000000
/root/.mplayer/gui.conf(35): equ_band_04
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,000000
/root/.mplayer/gui.conf(36): equ_band_05
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,000000
/root/.mplayer/gui.conf(37): equ_band_06
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,000000
/root/.mplayer/gui.conf(38): equ_band_07
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 0,000000
/root/.mplayer/gui.conf(39): equ_band_08
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 5,000000
/root/.mplayer/gui.conf(40): equ_band_09
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 5,000000
/root/.mplayer/gui.conf(41): equ_band_10
parameter must be a floating point number or a ratio 
(numerator[:/]denominator): 5,000000
/root/.mplayer/gui.conf(42): equ_band_11
too many errors
[cfg] config file read error ...

Even when I handly set parameters too integers or ratios, after restart story 
goes again.:{(

Is there some way to correct that?
Thank's in advance and after:)
Regards
Wieslaw