[MPlayer-users] dvd playback problem...

gabor gabor at realtime.sk
Thu Nov 21 14:28:02 CET 2002


ok, forget about this... already solved...

the problem was that i got my dvd-rom, and immediately i updated the
firmware to a region-free one...

but you have to set up a region...
so i had to:
-flash back to the default firmware
-set up a region
-flash to region free firmware


so the normal usage is:
-buy a dvd drive
-set up a region
-flash it with a region free firmware

bye,
gabor

On Thu, 2002-11-21 at 11:43, gabor wrote:
> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> On Thu, 2002-11-21 at 02:01, gabor wrote:
> > [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> > hi,
> > 
> > i can watch dvd without problems with mplayer -dvd 1
> > 
> > i have a toshiba1612 dvd drive, which was 'updated' to 
> > region-free...
> > 
> > but:
> >  i tried to use the -dvdnav feature, and it didn't work.
> > it's beta code so maybe it really doesn't work i said,
> > and went back to "mplayer -dvd 1"..
> > 
> > but now mplayer -dvd 1 doesn't work.... he tells 
> > playing dvd title 1,
> > and the hdd keeps working for some time then it stops..
> > 
> > i can kill mplayer after some time... 
> > 
> > btw. i tried xine to watch dvds and did the same.... reported
> > opening dvd, the hdd worked for some time ( 1minute approx ),
> > and then no response... when i killed xine, mplayer refused 
> > to play the dvd with the same error...
> > 
> > btw2. on windows i got the same problem from powerdvd player...
> > hdd working , no response, had to shutdown windows to stop it..
> > 
> > any ideas what's wrong?
> > and btw. what should i do to somehow 'reinitialize' the dvd drive,
> > so mplayer could play dvds once again... for now, i have to reboot
> > every time i do something like -dvdnav, or xine.
> 
> btw. i found out that even when using -dvdnav it works until he wants to
> show the menu...
> 
> "** Searching for menu (0x3) entry PGC749  295/295  21%  8%  7.6% 9 0 0%
> libdvdnav: Cell should restart here
> "
> 
> and dmesg shows:
> "hdc: irq timeout: status=0xd0 { Busy }
> hdc: DMA disabled
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xc0 { Busy }
> end_request: I/O error, dev 16:00 (hdc), sector 0
> "
> 
> thx,
> gabor
> 
> 
> > 
> > thx,
> > gabor
-- 
gpg key at www.keyserver.net




More information about the MPlayer-users mailing list