[MPlayer-users] fulscreen bug with 3dfx Voodoo 3

[James Lancaster]

On Thursday 21 November 2002 11:44, you wrote:
> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> I have strange bug while watching videos in fullscreen mode under X (using
> -vo xv and -vo sdl). It's a blue line
> (sometimes white, it changes when i quit and restart the movie in full
> screen mode). I have read, that this bug is only
> present on nVidia based videocards. That's how the mplayer documentation
> say:
>
> Q: I have an nVidia TNT/TNT2 card, and I have a band with strange colors,
> right under the movie! Whose fault is this?
> A: This is a bug of nVidia's binary X driver. These bugs appear ONLY with
> the TNT/TNT2 cards, and we can't do anything about it.   To fix the
> problem, upgrade to the latest nVidia binary driver version. If still bad,
> complain to nVidia!
>
> I have tha same problem, but with my 3DFX Voodoo 2000 16MB AGP graphic
> card. I dicovered that this bug dissapear (partly or in

Ditto this on a Voodoo3 2000 PCI (running rh7.3 (and yes, I do have the 
bloody 2.96 compilers)) (btw, that warning is getting really annoying on a 
sharp zaurus)

dual p3 800
256MB ram

Plays just fine, but when it comes up in fullscreen it does this the first 
time, then hit f f and it goes back to normal usually.
James L

> hundert percent) when i firstly run video with -vo sdl and switch
> resolution to other then I have my X already running and then when trying
> the -vo xv it looks almost good. I'm tired switching these modes, so please
> help me :) One more thing ... the same thing happens to me some time ago,
> whilst using RH 8.0 and RH 7.3.
> PS. Sorry for my poor english.
>
>
> SYSTEM INFORMATION:
> ---------------------
> Mandrake Linux release 9.0 (dolphin) for i586
> Kernel 2.4.19 on an i686 / tty1
>
> [root at skyrider root]# uname -a
> Linux skyrider 2.4.19 #3 Sat Oct 12 13:13:04 CEST 2002 i686 unknown unknown
> GNU/Linux
>
> [root at skyrider root]# ls -1 /lib/libc[.-]*
> /lib/libc-2.2.5.so*
> /lib/libc.so.6@
>
> [root at skyrider root]# X -version
>
> XFree86 Version 4.2.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 3 September 2002
>         If the server is older than 6-12 months, or if your card is
> 	newer than the above date, look for a newer version before
> 	reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF]
> Module Loader present
>
> [root at skyrider root]# gcc -v
> Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2/specs
> Configured with: ../configure --prefix=/usr --libdir=/usr/lib
> --with-slibdir=/lib --mandir=/usr/share/man --infodir=/usr/share/info
> --enable-shared --enable-threads=posix --disable-checking
> --enable-long-long --enable-__cxa_atexit
> --enable-languages=c,c++,ada,f77,objc,java
> --host=i586-mandrake-linux-gnu --with-system-zlib
> Thread model: posix
> gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)
>
> [root at skyrider root]# ld -v
> GNU ld version 2.12.90.0.15 20020717
>
> [root at skyrider root]# as --version
> GNU assembler 2.12.90.0.15 20020717
> Copyright 2002 Free Software Foundation, Inc.
> This program is free software; you may redistribute it under the terms of
> the GNU General Public License.  This program has absolutely no warranty.
> This assembler was configured for a target of `i586-mandrake-linux-gnu'.
>
> Every windowmanager supplied with MDK 9.0 and FLUXBOX 0.1.12
>
> HARDWARE & DRIVERS:
> ---------------------
> [root at skyrider root]# cat /proc/cpuinfo
> processor       : 0
> vendor_id       : GenuineIntel
> cpu family      : 6
> model           : 8
> model name      : Celeron (Coppermine)
> stepping        : 3
> cpu MHz         : 668.205
> cache size      : 128 KB
> fdiv_bug        : no
> hlt_bug         : no
> f00f_bug        : no
> coma_bug        : no
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 2
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
> pat pse36 mmx fxsr sse
> bogomips        : 1333.65
>
>
> Video card : 3DFX Voodoo 3 2000 16MB AGP
> DRI from XFree86 4.2.1
>
> Sound card : SBLive! w/OSS drivers
>
> [root at skyrider root]# lspci -vv
>
> 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
> (rev 44)
> 	Subsystem: Elitegroup Computer Systems: Unknown device 0a02
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR-
> 	Latency: 0
> 	Region 0: Memory at d6000000 (32-bit, prefetchable) [size=16M]
> 	Capabilities: [a0] AGP version 1.0
> 		Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
> 		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
> MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort+ >SERR- <PERR-
> 	Latency: 0
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> 	I/O behind bridge: 0000c000-0000cfff
> 	Memory behind bridge: d0000000-d3ffffff
> 	Prefetchable memory behind bridge: d4000000-d5ffffff
> 	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> 	Capabilities: [80] Power Management version 2
> 		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
> (rev 22)
> 	Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+ SERR- FastB2B-
> 	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 	Latency: 0
>
> 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10)
> (prog-if 8a [Master SecP PriP])
> 	Subsystem: VIA Technologies, Inc. Bus Master IDE
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 	Latency: 32
> 	Region 4: I/O ports at d000 [size=16]
> 	Capabilities: [c0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> (rev 30)
> 	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 	Interrupt: pin ? routed to IRQ 9
> 	Capabilities: [68] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
> 	Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS)
> 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: I/O ports at dc00 [size=32]
>
> 00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
> 06) Subsystem: Creative Labs CT4832 SBLive! Value
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 	Latency: 32 (500ns min, 5000ns max)
> 	Interrupt: pin A routed to IRQ 5
> 	Region 0: I/O ports at e000 [size=32]
> 	Capabilities: [dc] Power Management version 1
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
> 06)
> 	Subsystem: Creative Labs Gameport Joystick
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 	Latency: 32
> 	Region 0: I/O ports at e400 [size=8]
> 	Capabilities: [dc] Power Management version 1
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
> (prog-if 00 [VGA])
> 	Subsystem: 3Dfx Interactive, Inc. Voodoo3 AGP
> 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> 	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR+
> 	Interrupt: pin A routed to IRQ 10
> 	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=32M]
> 	Region 1: Memory at d4000000 (32-bit, prefetchable) [size=32M]
> 	Region 2: I/O ports at c000 [size=256]
> 	Expansion ROM at <unassigned> [disabled] [size=64K]
> 	Capabilities: [54] AGP version 1.0
> 		Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2
> 		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
> 	Capabilities: [60] Power Management version 1
> 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
> EOF
>
> _______________________________________________
> RTFM!!!  http://www.MPlayerHQ.hu/DOCS
> Search:  http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users