[MPlayer-users] Bug Report
Corey Hickey
bugfood-ml at fatooh.org
Sat Oct 19 03:37:02 CEST 2002
Uhm, did you get your examples switched? The first one you show is
CVS-020801, and the second is 0.90pre8. Unless I'm reading the version
string wrong, the CVS example is way old, so I'll disregard that and
focus on the pre-8.
Solution 1 (better):
Use -vo xv. As far as I know, the TNT2 has xv support, so you might be
able to get that working. Type xvinfo and see what that says.
Solution 2 (quick):
Continue using -vo x11. x11 doesn't have hardware scaling, so you have
to either enable software scaling with -zoom (this is slooow) or change
the vidmode with -vm.
stephane duverger wrote:
> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> Good day,
>
> I use mplayer for 6 or 7 month. But recently i've installed the latest release i've found( tar.gz format) but video output doesn't work at all (the dump is at the end of the mail => the first MPLAYER dump).
>
> I tryed another release which information version is at the end of the mail too (second DUMP) and i have the following problem : i'm not able to look at video files in full screen mode neither resize the video output. It's not a WindowManager problem, because the window of mplayer switch well to fullscreen mode, but the video is still in 320x240. With the old release (6 r 7 month before) and the same hardware and software config, it worked very fine. So i suggest you this problem.
> Here is my config:
>
> System Information:
>
> * Debian unstable Sid
> * Linux 2.4.19 i686
> * /lib/libc-2.2.5.so
> * XFree86 Version 4.1.0.1 (protocol Version 11, revision 0, vendor release 6510), Release Date: 21 December 2001,
> Build Operating System: Linux 2.4.18 i686 [ELF] Module Loader present
>
> *gcc version 2.95.4 20011002 (Debian prerelease)
> *GNU ld version 2.13.90.0.4 20020814 Debian GNU/Linux
> *GNU assembler 2.13.90.0.4 20020814 Debian GNU/Linux
> *Window Maker 0.80.1
>
> Hardware & Drivers:
>
> *CPU:
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 7
> model name : Pentium III (Katmai)
> stepping : 3
> cpu MHz : 451.028
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
> bogomips : 897.84
>
> *Video Card: Viper V770 TNT2 32MB
> NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123
> Fast Writes: Not Supported
> SBA: Supported
> AGP Rates: 2x 1x
> Registers: 0x1f000203:0x00000000
>
> I haven't got more information about the Xfree nv driver, obtained with the kernel driver. nothing about a version in the XFree log.(I use the x11 vo, cause my card doesn't support xv)
>
> *xdpyinfo:
> name of display: :0.0
> version number: 11.0
> vendor string: The XFree86 Project, Inc
> vendor release number: 40100001
> XFree86 version: 4.1.0.1
> maximum request size: 4194300 bytes
> motion buffer size: 256
> bitmap unit, bit order, padding: 32, LSBFirst, 32
> image byte order: LSBFirst
> number of supported pixmap formats: 7
> supported pixmap formats:
> depth 1, bits_per_pixel 1, scanline_pad 32
> depth 4, bits_per_pixel 8, scanline_pad 32
> depth 8, bits_per_pixel 8, scanline_pad 32
> depth 15, bits_per_pixel 16, scanline_pad 32
> depth 16, bits_per_pixel 16, scanline_pad 32
> depth 24, bits_per_pixel 32, scanline_pad 32
> depth 32, bits_per_pixel 32, scanline_pad 32
> keycode range: minimum 8, maximum 255
> focus: window 0x1a0000e, revert to Parent
> number of extensions: 29
> BIG-REQUESTS
> DOUBLE-BUFFER
> DPMS
> Extended-Visual-Information
> FontCache
> GLX
> LBX
> MIT-SCREEN-SAVER
> MIT-SHM
> MIT-SUNDRY-NONSTANDARD
> NVIDIA-GLX
> RECORD
> RENDER
> SECURITY
> SHAPE
> SYNC
> TOG-CUP
> X3D-PEX
> XC-APPGROUP
> XC-MISC
> XFree86-Bigfont
> XFree86-DGA
> XFree86-Misc
> XFree86-VidModeExtension
> XIE
> XInputExtension
> XKEYBOARD
> XTEST
> XVideo
> default screen number: 0
> number of screens: 1
>
> screen #0:
> dimensions: 1280x960 pixels (325x244 millimeters)
> resolution: 100x100 dots per inch
> depths (7): 24, 1, 4, 8, 15, 16, 32
> root window id: 0x2d
> depth of root window: 24 planes
> number of colormaps: minimum 1, maximum 1
> default colormap: 0x20
> default number of colormap cells: 256
> preallocated pixels: black 0, white 16777215
> options: backing-store NO, save-unders NO
> largest cursor: 32x32
> current input event mask: 0x78407f
> KeyPressMask KeyReleaseMask ButtonPressMask ButtonReleaseMask EnterWindowMask LeaveWindowMask PointerMotionMask KeymapStateMask SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask PropertyChangeMask
> number of visuals: 2
> default visual id: 0x21
> visual:
> visual id: 0x21
> class: TrueColor
> depth: 24 planes
> available colormap entries: 256 per subfield
> red, green, blue masks: 0xff0000, 0xff00, 0xff
> significant bits in color specification: 8 bits
> visual:
> visual id: 0x22
> class: DirectColor
> depth: 24 planes
> available colormap entries: 256 per subfield
> red, green, blue masks: 0xff0000, 0xff00, 0xff
> significant bits in color specification: 8 bits
>
> *No sound problems: SB awe 32
>
> *lspci -vv important pieces of information:
> 01:00.0 VGA compatible controller: nVidia Corporation NV5 [Riva TnT2] (rev 11) (prog-if 00 [VGA])
> Subsystem: Diamond Multimedia Systems Viper V770
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 248 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 9
> Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
> MPLAYER dump:
>
> ***** Example with latest release ***********/
>
> gmplayer -vo x11 \[sv\]shortys.fulfill.the.dream.rivers.divx.avi
>
>
> MPlayer CVS-020801-06:00-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
>
> CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Family: 6, Stepping: 3)
> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 SSE
>
> vo: X11 running at 1280x960 with depth 24 and 32 bpp (":0.0" => local display)
> Reading /home/tr0n/.mplayer/codecs.conf: can't open '/home/tr0n/.mplayer/codecs.conf': No such file or directory
> Reading /usr/local/share/mplayer/codecs.conf: 36 audio & 103 video codecs
> font: can't open file: /home/tr0n/.mplayer/font/font.desc
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
> Linux RTC init error: No such file or directory
> Using usleep() timing
> Can't open input config file /home/tr0n/.mplayer/input.conf : No such file or directory
> Can't open input config file /usr/local/share/mplayer/input.conf : No such file or directory
> Falling back on default (hardcoded) input config
> [cfg] read config file: /home/tr0n/.mplayer/gui.conf
> SKIN dir 1: '/home/tr0n/.mplayer/Skin'
> SKIN dir 2: '/usr/local/share/mplayer/Skin'
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
>
> Playing [sv]shortys.fulfill.the.dream.rivers.divx.avi
> Detected AVI file format!
> AVI: Generated index table for 67956 chunks!
> VIDEO: [DIV3] 320x240 24bpp 29.97 fps 261.6 kbps (31.9 kbyte/s)
> Detected audio codec: [mp3] afm:1 (mp3lib MPEG layer-2, layer-3)
> Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> AUDIO: 24000 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 4000->96000 (32.0 kbit)
> It seems there is no Xvideo support for your video card available.
> Run 'xvinfo' to verify its Xv support, and read Xv section of DOCS/video.html !
> See 'mplayer -vo help' for other (non-xv) video out drivers. Try -vo x11
> Error opening/initializing the selected video_out (-vo) device!
>
>
> Exiting... (Quit)
>
> // error message say to use x11, and the command line show that i have used it
> // Hummm strange ... it works with lod releases ....
>
>
> /********** Release not as old as the MARVELOUS version of the past (which i forgot the version number but 6 month before where video size worked very fine). The video works but stays small even if i enlarge the window *****************/
>
> gmplayer -vo x11 \[sv\]shortys.fulfill.the.dream.rivers.divx.avi
>
>
> MPlayer 0.90pre8-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS)
>
> CPU: Intel Pentium III Katmai/Pentium III Xeon Tanner (Family: 6, Stepping: 3)
> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 SSE
>
> Creating config file: /home/tr0n/.mplayer/config
> [cfg] read config file: /home/tr0n/.mplayer/gui.conf
> vo: X11 running at 1280x960 with depth 24 and 32 bpp (":0.0" => local display)
> Disabling DPMS
> Reading /home/tr0n/.mplayer/codecs.conf: can't open '/home/tr0n/.mplayer/codecs.conf': No such file or directory
> Reading /usr/local/etc/mplayer/codecs.conf: 38 audio & 106 video codecs
> font: can't open file: /home/tr0n/.mplayer/font/font.desc
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
> Linux RTC init error: No such file or directory
> Using usleep() timing
> Can't open input config file /home/tr0n/.mplayer/input.conf : No such file or directory
> Input config file /usr/local/etc/mplayer/input.conf parsed : 50 binds
> SKIN dir 1: '/home/tr0n/.mplayer/Skin'
> SKIN dir 2: '/usr/local/share/mplayer/Skin'
> font: can't open file: /home/tr0n/.mplayer/font/font.desc
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
>
> Playing [sv]shortys.fulfill.the.dream.rivers.divx.avi
> Detected AVI file format!
> VIDEO: [DIV3] 320x240 24bpp 29.97 fps 263.3 kbps (32.1 kbyte/s)
> ==========================================================================
> Detected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
> Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> AUDIO: 24000 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 4000->96000 (32.0 kbit)
> ==========================================================================
> Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
> Detected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
> ==========================================================================
> AO: [oss] 24000Hz 2ch Signed 16-bit (Little-Endian)
> Start playing...
> VDec: vo config request - 320 x 240 (preferred csp: Planar YV12)
> VDec: using Planar YV12 as output csp (no 0)
> Movie-Aspect is undefined - no prescaling applied.
> VO: [x11] 320x240 => 320x240 Planar YV12
> Using MMX2 for colorspace transform
> SwScaler: using unscaled Planar YV12 -> BGR 32-bit special converter
> Successfully enabled DPMS.006 ct: 0.005 642/642 13% 6% 1.9% 24 0 0%
> Successfully enabled DPMS
>
> Exiting... (Exit)
>
>
> //as you can see 320x240 video mode.
>
>
> I thank you in advance. This soft is amazing. It's fast and work very fine (even if sometimes ... video size ... :) ). I'm sure you have a solution. i know NVidia cards are not suggested but in the past it worked perfectly so i don't know why those new releases don't work.
>
> Best regards,
>
> Stef
>
> _______________________________________________
> RTFM!!! http://www.MPlayerHQ.hu/DOCS
> Search: http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>
More information about the MPlayer-users
mailing list