[MPlayer-users] Mandrake 9 and MPlayer problem
Gustavo Sverzut Barbieri
gsbarbieri at yahoo.com.br
Wed Oct 30 09:45:02 CET 2002
Same problem.
Also, fbdev also gave me an seg fault with: can't put VSCREENINFO
My system is a PIV-2.0Ghz, video: SiS650, kernel 2.4.19
But I think is a distro problem.
Gustavo
--- Aleksandar Tsancov <alex at tu-plovdiv.bg> escreveu:
> [Automatic answer: RTFM (read DOCS, FAQ), also read
> DOCS/bugreports.html]
> Hello, guis!
> First of all, I have to say that MPlayer is the great! I've been
> using it
> since v. 0.18 and closely read all comments in the mail-list. On the
> other
> hand, i'm using Mandrake distribution because of good
> internationalisation
> support.
> I have an ATI Rage 128 with 32 MB RAM and TV-OUT. In order to watch
> movies on
> TV I use atitvout-0.2 program to enable TV output and run MPlayer in
> vesa
> mode. Prior to Mandrake 9 everything works fine. Immediatly after
> install of
> Mandrake 9 I compiled MPlayer 0.90pre8 and tried to play a movie as
> usual,
> but the player exited with "Segmentation fault". After that I
> compiled two
> CVS versions and 0.90pre9, but the problem is the same. Under X
> everything
> works fine (all versions). Is there any Mandrake 9 user with the same
> problem?
> I think the problem is not in MPlayer but in distro.
> I include short bugreport:
>
> Distribution: Mandrake9.0
>
> [alex at localhost alex]$uname -a
> Linux localhost.localdomain 2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST
> 2002
> i686 unknown unknown GNU/Linux
>
> [alex at localhost alex]$ls -l /lib/libc[.-]*
> -rwxr-xr-x 1 root root 1147848 àâã 19 13:17
> /lib/libc-2.2.5.so*
> lrwxr-xr-x 1 root root 13 îêò 12 00:00
> /lib/libc.so.6 ->
> libc-2.2.5.so*
>
> [alex at localhost alex]$X -version
> XFree86 Version 4.2.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 3 September 2002
> If the server is older than 6-12 months, or if your card
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF]
> Module Loader present
>
> [alex at localhost alex]$gcc -v
> Reading specs from /usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2/specs
> Configured with: ../configure --prefix=/usr --libdir=/usr/lib
> --with-slibdir=/lib --mandir=/usr/share/man --infodir=/usr/share/info
>
> --enable-shared --enable-threads=posix --disable-checking
> --enable-long-long
> --enable-__cxa_atexit --enable-languages=c,c++,ada,f77,objc,java
> --host=i586-mandrake-linux-gnu --with-system-zlib
> Thread model: posix
> gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)
>
> [alex at localhost alex]$ld -v
> GNU ld version 2.12.90.0.15 20020717
>
> [alex at localhost alex]$as --version
> GNU assembler 2.12.90.0.15 20020717
> Copyright 2002 Free Software Foundation, Inc.
> This program is free software; you may redistribute it under the
> terms of
> the GNU General Public License. This program has absolutely no
> warranty.
> This assembler was configured for a target of
> `i586-mandrake-linux-gnu'.
>
> [alex at localhost alex]$ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 3
> model name : AMD Duron(tm) Processor
> stepping : 1
> cpu MHz : 849.990
> cache size : 64 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> pge mca
> cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
> bogomips : 1697.38
>
> [root at localhost alex]# lspci -vv
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
> (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort+ >SERR- <PERR-
> Latency: 8
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
> Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
> AGP]
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort+ >SERR- <PERR-
> Latency: 0
>
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: d8000000-d9ffffff
> Prefetchable memory behind bridge: d4000000-d7ffffff
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
> South] (rev
> 40)
> Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0
>
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
>
> (prog-if 8a [Master SecP PriP])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 32
>
> Region 4: I/O ports at d000 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if
> 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
>
> Interrupt: pin D routed to IRQ 5
> Region 4: I/O ports at d400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if
> 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
>
> Interrupt: pin D routed to IRQ 5
> Region 4: I/O ports at d800 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> (rev 40)
> Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
>
> Interrupt: pin ? routed to IRQ 9
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
> AC97
> Audio Controller (rev 50)
> Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
>
> Interrupt: pin C routed to IRQ 12
> Region 0: I/O ports at dc00 [size=256]
> Region 1: I/O ports at e000 [size=4]
> Region 2: I/O ports at e400 [size=4]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:09.0 Multimedia audio controller: Yamaha Corporation YMF-724F
> [DS-1 Audio
> Controller] (rev 03)
> Subsystem: Yamaha Corporation DS-XG PCI Audio CODEC
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping-
> SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR+
> Latency: 32 (1250ns min, 6250ns max)
>
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=32K]
> Capabilities: [50] Power Management version 1
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro
> Ultra TF
> (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+
> SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min), cache line size 08
>
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
> Region 1: I/O ports at c000 [size=256]
> Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [50] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
> Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
> Capabilities: [5c] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> [root at localhost alex]# mplayer -vo vesa /mnt/cdrom/Legally Blonde.avi
> >
> mplayer.log 2>&1
>
> [alex at localhost alex]$ cat mplayer.log
> Using GNU internationalization
> Original domain: messages
> Original dirname: /usr/share/locale
> Current domain: mplayer
> Current dirname: /usr/local/share/locale
>
>
> MPlayer 0.90pre9-3.2 (C) 2000-2002 Arpad Gereoffy
> (ïðî÷åòè Äîêóìåíòàöèÿòà â ./DOCS/ è manpage -> `man mplayer` )
> CPU: Advanced Micro Devices Duron SF Spitfire (Family: 6, Stepping:
> 1)
> CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
> Ïîääðúæêà íà x86 CPU ñ : MMX MMX2 3DNow 3DNowEx
>
> Reading /root/.mplayer/codecs.conf: 38 audio & 110 video codecs
> init_freetype
> Èçïîëâçâàì Linux's hardware RTC òàéìåð (1024Hz)
> Can't open input config file /root/.mplayer/input.conf : No such file
> or
> directory
> Can't open input config file /usr/local/etc/mplayer/input.conf : No
> such file
> or directory
> Falling back on default (hardcoded) input config
>
> Playing /mnt/cdrom/Legally Blonde.avi
> Çàñå÷åí ôàéëîâ ôîðìàò AVI!
> VIDEO: [DIV3] 576x240 24bpp 23,98 fps 1038,1 kbps (126,7
> kbyte/s)
> Èíôîðìàöèÿ çà ïàð÷åòî:
> Software: Nandub v1.0rc2
> SUB: Detected sub file: /mnt/cdrom/Legally Blonde.sub
> SUB: Detected subtitle file format: microdvd
> SUB: Read 1426 subtitles.
> SUB: Adjusted 1160 subtitle(s).
>
>
==========================================================================
> Îòâàðÿì àóäèî äåêîäåð: [mp3lib] MPEG layer-2, layer-3
> AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->192000 (128,0
> kbit)
> Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2,
> layer-3)
>
>
==========================================================================
>
>
==========================================================================
> Îòâàðÿì âèäåî äåêîäåð: [ffmpeg] FFmpeg's libavcodec codec family
> Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS
> MPEG-4 v3))
>
>
==========================================================================
> AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian)
> Building audio filter chain for 48000Hz/2ch/16bit ->
> 48000Hz/2ch/16bit...
> Start playing...
> VDec: vo config èçèñêâà - 576 x 240 (öâåòîâè ðåæèì - csp: Planar
> YV12)
> VDec: using Planar YV12 as output csp (no 0)
> Movie-Aspect å íåäåôèíèðàí - çàïàçâàì ñúîòíîøåíèåòî.
> VO: [vesa] 576x240 => 576x240 Planar YV12
> Segmentation fault
>
> _______________________________________________
> RTFM!!! http://www.MPlayerHQ.hu/DOCS
> Search: http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
_______________________________________________________________________
Yahoo! GeoCities
Tudo para criar o seu site: ferramentas fáceis de usar, espaço de sobra e acessórios.
http://br.geocities.yahoo.com/
More information about the MPlayer-users
mailing list