[MPlayer-users] DPMS failure
Jeffrey Hammel
jhammel at EECS.Berkeley.EDU
Sat Sep 28 05:20:03 CEST 2002
>Hi,
>
>> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
>> From: JC Wong <catalyst at gmx.net>
>> >Hi,
>> >
>> >MPlayer-0.90pre8 and current cvs version failed to 'Enable' back DPMS
>> >after Quit or media playing completed.
>> >I have to commented out line ' #define HAVE_XDPMS 1 ' in my config.h after
>> >configure for MPlayer not to disable my DPMS.
>>
>> I have this problem as well since I started using pre 8.
>
>then both go and RTFB
>which vo, etc
>
>A'rpi / Astral & ESP-team
I didn't think that was going to fly. Sorry about that. Just to whine a
bit, no access from my computer to internet, so I was lazy (i.e. I'm on
another PC copying not quite by hand). Also, my system is a bit screwy at
the moment as I haven't had time to fix major bugs, and hide my face in shame
at my horrible configuration. Those disclaimers aside,
here is a bugreport.
I have tried -vo xvidix and -vo xv and observed this problem. I can try
more video outs if desired. Also, type of file doesn't seem to make a
difference.
Redhat 7.2
uname -a
Linux localhost.localdomain 2.4.19 #2 Mon Aug 12 18:53:03 PDT 2002 i686
unknown
ls /usr/lib/libc[.-]*
/usr/lib/libc.a /usr/lib/libc.so
X -version
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
gcc -v
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.1/specs
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
--infodir=/usr/share/info --enable-shared --enable-threads=posix
--disable-checking --host=i386-redhat-linux --with-system-zlib
Thread model: posix
gcc version 3.1 20020314 (Red Hat Linux Rawhide 3.1-0.23.1)
ld -v
GNU ld version 2.11.93.0.2 20020207
as --version
GNU assembler 2.11.93.0.2 20020207
Copyright 2002 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License. This program has absolutely no warranty.
This assembler was configured for a target of `i386-redhat-linux'.
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 1800+
stepping : 2
cpu MHz : 1534.016
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnowbogomips :
3060.53
ATI Radeon 7200, kernel modules, dri, excerpts from
/var/log/XFree86.0.log:
(II) RADEON(0): [drm] loaded kernel module "radeon"
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:0:0"
(II) RADEON(0): [drm] added 4096 byte SAREA at 0xf8979000
(II) RADEON(0): [drm] mapped SAREA 0xf8979000 to 0x40017000
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3099; Card
0x1002/0x5159]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0xfa97c000
(II) RADEON(0): [agp] ring handle = 0xe8000000
(II) RADEON(0): [agp] Ring mapped at 0x42251000
(II) RADEON(0): [agp] ring read ptr handle = 0xe8101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x40018000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe8102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x42352000
(II) RADEON(0): [agp] AGP texture map handle = 0xe8302000
(II) RADEON(0): [agp] AGP Texture map mapped at 0x42552000
(II) RADEON(0): [drm] register handle = 0xed000000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB AGP aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for AGP textures
(II) RADEON(0): Memory manager initialized to (0,0) (1600,2401)
(II) RADEON(0): Reserved area from (0,1200) to (1600,1202)
(II) RADEON(0): Largest offscreen area available: 1600 x 1199
(II) RADEON(0): Reserved back buffer at offset 0xeaa000
(II) RADEON(0): Reserved depth buffer at offset 0x15fd000
(II) RADEON(0): Reserved 2752 kb for textures at offset 0x1d50000
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
19 256x256 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 4808)
(II) RADEON(0): Largest offscreen area available: 1600 x 1198
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): X context handle = 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): Direct rendering enabled
Creative Audigy with drivers from oss.creative.com
lspci -vv
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: e0000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Communication controller: Lucent Microelectronics Venus Modem
(V90, 56KFlex)
Subsystem: Action Tec Electronics Inc: Unknown device 0500
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef004000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at a000 [size=256]
Region 2: I/O ports at a400 [size=256]
Region 3: I/O ports at a800 [size=8]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:0d.0 Multimedia audio controller: Creative Labs: Unknown device 0004
(rev 03)
Subsystem: Creative Labs: Unknown device 0040
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ac00 [size=32]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.2 FireWire (IEEE 1394): Creative Labs: Unknown device 4001 (prog-if
10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ef006000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
Subsystem: Netgear FA310TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at ef005000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=256K]
00:10.0 Network controller: Harris Semiconductor: Unknown device 3873 (rev
01)
Subsystem: Unknown device 1737:3874
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ef007000 (32-bit, prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at b400 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1b) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at b800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1b) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at bc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.4 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1b) (prog-if
00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device
5159 (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 000a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at ed000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
mplayer -v -vo xvidix Aqua\ Teen\ Hunger\ Force\ -\ 01\ -\ Rabbot.avi
MPlayer 0.90pre8-3.1 (C) 2000-2002 Arpad Gereoffy (see DOCS)
CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP
Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping:
2)CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
Reading /root/.mplayer/codecs.conf: can't open
'/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: 38 audio & 106 video codecs
CommandLine: '-v' '-vo' 'xvidix' 'Aqua Teen Hunger Force - 01 -
Rabbot.avi'
get_path('font/font.desc') -> '/root/.mplayer/font/font.desc'
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206
chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz)
get_path('input.conf') -> '/root/.mplayer/input.conf'
Can't open input config file /root/.mplayer/input.conf : No such file or
directory
Can't open input config file /usr/local/etc/mplayer/input.conf : No such
file or directory
Falling back on default (hardcoded) input config
Playing Aqua Teen Hunger Force - 01 - Rabbot.avi
Not an URL!
File size is 50151328 bytes
Detected AVI file format!
list_end=0x146
======= AVI Header =======
us/frame: 33367 (fps=29.970)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (2064) HAS_INDEX TRUST_CKTYPE
frames total: 21452 initial: 0
streams: 2
Suggested BufferSize: 0
Size: 320 x 240
list_end=0xD4
==> Found video stream: 0
======= STREAM Header =======
Type: vids FCC: DIV3 (33564944)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 1000000/33367 = 29.970
Start: 0 Len: 21452
Suggested BufferSize: 0
Quality -1
Sample size: 0
found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 320
biHeight 240
biPlanes 1
biBitCount 24
biCompression 861292868='DIV3'
biSizeImage 230400
===========================
Regenerating keyframe table for DIVX 3 video
list_end=0x146
==> Found audio stream: 1
======= STREAM Header =======
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 11982/1 = 11982.000
Start: 0 Len: 8576582
Suggested BufferSize: 0
Quality -1
Sample size: 1
found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 44100
avg byte/sec: 11982
Block align: 1
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=313
mp3.nFramesPerBlock=1
mp3.nCodecDelay=1393
list_end=0x1AA
hdr=Subject size=36
Subject : Aqua Teen Hunger Force episode 02
hdr=Copyright size=36
Copyright : Encoded by binarydreams 09/24/2001
Broken chunk? chunksize=1602 (id=JUNK)
list_end=0x2F7A308
Found movie at 0x800 - 0x2F7A307
Reading INDEX block, 22985 chunks for 21452 frames
Broken chunk? chunksize=0 (id=idx1)
Reading INDEX block, 22985 chunks for 21452 frames
AVI index offset: 0x7FC (movi=0x800 idx0=0x4 idx1=0x15EA)
Auto-selected AVI audio ID = 1
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:1)
AVI video length=41021058
VIDEO: [DIV3] 320x240 24bpp 29.97 fps 458.5 kbps (56.0 kbyte/s)
[V] filefmt:3 fourcc:0x33564944 size:320x240 fps:29.97 ftime:=0.0334
Clip info:
Subject: Aqua Teen Hunger Force episode 02
Copyright: Encoded by binarydreams 09/24/2001
get_path('sub/') -> '/root/.mplayer/sub/'
==========================================================================
Detected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
Initializing audio codec...
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using 3DNow!Ex optimized decore!
MPEG 1.0, Layer III, 44100 Hz 96 kbit Joint-Stereo, BPF: 313
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, sfmt: 0x10 (2 bps), ratio: 12000->176400 (96.0
kbit)
No vidix driver name provided, probing available ones!
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/genfb_vid.so
[genfb] probe
Error occured durint open: No such device
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/mach64_vid.so
[mach64] Can't find chip
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/mga_crtc2_vid.so
[mga] probe
[mga] found 12 pci devices
[mga] No supported cards found
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/mga_vid.so
[mga] probe
[mga] found 12 pci devices
[mga] No supported cards found
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/nvidia_vid.so
[nvidia] probe
No chip found
vidixlib: PROBING: /usr/local/lib/mplayer/vidix/radeon_vid.so
Radeon_vid: Found chip: Radeon VE QY
vidixlib: /usr/local/lib/mplayer/vidix/radeon_vid.so probed o'k
vidixlib: will use /usr/local/lib/mplayer/vidix/radeon_vid.so driver
vidixlib: Attempt to initialize driver at: 0x40093f40
Radeon_vid: Video memory = 32Mb
Radeon_vid: Set write-combining type of video memory
vidixlib: '/usr/local/lib/mplayer/vidix/radeon_vid.so'successfully loaded
VIDIX: Description: BES driver for radeon cards
VIDIX: Author: Nick Kurshev
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Detected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested:
Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 16/16 (4096 bytes/frag) free: 65536
Start playing...
VDec: vo config request - 320 x 240 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO Config (320x240->320x240,flags=0,'MPlayer',0x32315659)
VO: [xvidix] 320x240 => 320x240 Planar YV12
VO: Description: X11 (VIDIX)
VO: Author: Alex Beregszaszi
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1600x1200 with depth 24 and 32 bpp (":0.0" => local
display)
Disabling DPMS
DPMSDisable stat: 1
[xvidix] dcx: 640 dcy: 480 dx: 0 dy: 0 dw: 320 dh: 240
vosub_vidix: using 1 buffer(s)
[xvidix] window properties: pos: 640x480, size: 320x240
*** [vo] Allocating mp_image_t, 320x240x12bpp YUV planar, 115200 bytes
[xvidix] dcx: 640 dcy: 480 dx: 0 dy: 0 dw: 320 dh: 240
[xvidix] window properties: pos: 640x480, size: 320x240
XXX initial v_pts=0.434 a_pos=5597 (0.467) / 1 0% 0% 0.0% 0 0 0%
*** [vo] Allocating mp_image_t, 320x240x12bpp YUV planar, 115200 bytes
DEMUXER: freeing demuxer at 0x83df960 1 121/121 10% 0% 0.8% 3 0 0%
Successfully enabled DPMS
Successfully enabled DPMS
vo: uninit ...
Exiting... (Quit)
I quit prematurely, but again, this doesn't seem to matter.
So mplayer says DPMS is enabled. In fact, it says it twice. I have a
script
called blank and noblank as follows which I use to control screen
blanking for less enlightened apps (e.g. ogle).
blank:
xset +dpms
xset dpms 0 0 0
xset s 600
xset s blank
noblank:
xset +dpms
xset dpms 0 0 0
xset s 0
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
auto repeat delay: 660 repeat rate: 25
auto repeating keys: 00ffffffdffffbbf
fa9fffffffdffdff
ffffffffffffffff
ffffffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
unix/:7100
Bug Mode: compatibility mode is disabled
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
hi-mark (KB): 1024 low-mark (KB): 768 balance (%): 70
Now, after I run mplayer
xset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
auto repeat delay: 660 repeat rate: 25
auto repeating keys: 00ffffffdffffbbf
fa9fffffffdffdff
ffffffffffffffff
ffffffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
unix/:7100
Bug Mode: compatibility mode is disabled
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
hi-mark (KB): 1024 low-mark (KB): 768 balance (%): 70
I cat these to samp1 and samp2 respectively, the difference?
# diff samp1 samp2
13c13
< timeout: 600 cycle: 600
---
> timeout: 0 cycle: 600
You may wonder at the logic of my script. Good or bad, it used to work
with
versions before pre8. If my script is faulty, please let me know.
Anyway, sorry for the previous (non-existant) bug-report. My system needs
a major overhaul, but unfortunately I have a (work-related) program
running at the moment so I can't take her down :(
Jeff Hammel
More information about the MPlayer-users
mailing list