[MPlayer-users] Re: RH8: Can't Use VESA, Even As Root
Gjermund G. Thorsen
gjermund at comitas.no
Sun Feb 9 10:02:09 CET 2003
It runs fine as gjermund when I add my useraccount to root-group
ggt
On søndag, feb 9, 2003, at 02:01 Europe/Oslo, Dan8827 wrote:
> [Automatic answer: RTFM (read DOCS, FAQ), also read
> DOCS/bugreports.html]
> Thanks to those who have contributed ideas so far. I haven't fixed
> this
> yet, but I might have learned more about the problem. I've done some
> experimenting, and some reading on this list and Google. Also, I
> booted
> into Redhat 7.0, ran the same file (successfully) , and compared the
> messages to those on Redhat 8.0. Here's what I've learned:
>
> 1. The "VO: Comment: Requires ROOT privileges" is apparently for
> information only, not an indication that it failed to obtain root
> privileges. I get the same message on Redhat 7.0 when VESA is
> successful.
>
> 2. I gave fbdev a try, but without success. I believe that's not
> supported in Redhat, and I'm not looking to build my own kernel just
> yet. I could be wrong here - I'll admit I haven't R'd the FM when it
> comes to fbdev.
>
> 3. Switching to gentoo apparently won't help, as there was a post today
> from a gentoo user with the same difficulty. :)
>
> Here's a portion of the output from mplayer under Redhat:
>
> -------
> VO Config (640x360->640x360,flags=1,'MPlayer',0x32315659)
> VO: [vesa] 640x360 => 640x360 Planar YV12 [fs]
> VO: Description: VESA VBE 2.0 video output
> VO: Author: Nick Kurshev <nickols_k at mail.ru>
> VO: Comment: Requires ROOT privileges
> [?25lvo_vesa: Found VESA VBE BIOS Version 2.0 Revision: 100
> vo_vesa: Video memory: 32768 Kb
> vo_vesa: VESA Capabilities: 8-bit DAC, VGA CRTC, normal RAMDAC, no
> stereoscopic, no stereo
> vo_vesa: !!! Below will be printed OEM info. !!!
> vo_vesa: You should watch 5 OEM related lines below else you've broken
> vm86
> vo_vesa: OEM info: ATI RAGE128
> vo_vesa: OEM Revision: 100
> vo_vesa: OEM vendor: ATI Technologies Inc.
> vo_vesa: OEM Product Name: R128
> vo_vesa: OEM Product Rev: 01.00
> vo_vesa: Hint: To get workable TV-Out you should have plugged
> tv-connector in
> vo_vesa: before booting PC since VESA BIOS initializes itself only
> during POST
> vo_vesa: Requested mode: 640x360 at 16 (Planar YV12)
> vo_vesa: Total modes found: 56
> ------
>
> On Redhat 8, the message immediately after "VO: Comment: Requires ROOT
> privileges" was "Killed", at which point mplayer stops.
>
> As seen above, Redhat 7.0 continues with the following message:
> "vo_vesa: Found VESA VBE BIOS Version 2.0 Revision: 100"
>
> ...so I'd presume the problem is somehow related to the VESA BIOS. Any
> thoughts on what might cause Redhat 8 to stumble at this point? It's
> the same video card between 7.0 and 8.0. Also, X appears to be
> accessing the VBE BIOS under 8.0 without a problem; here's a bit from
> /var/log/XFree86.0.log:
>
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.2.0, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.5
> (II) R128(0): VESA BIOS detected
> (II) R128(0): VESA VBE Version 2.0
> (II) R128(0): VESA VBE Total Mem: 32768 kB
> (II) R128(0): VESA VBE OEM: ATI RAGE128
> (II) R128(0): VESA VBE OEM Software Rev: 1.0
> (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
> (II) R128(0): VESA VBE OEM Product: R128
> (II) R128(0): VESA VBE OEM Product Rev: 01.00
>
> Any advice on what the check next?
>
> Thanks again.
>
> --
> Damian
> Increasing The Entropy Of The Universe Since 1972
>
>
> _______________________________________________
> RTFM!!! http://www.MPlayerHQ.hu/DOCS
> Search: http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>
More information about the MPlayer-users
mailing list