[MPlayer-users] I STILL, STILL, STILL cannot compile mplayer/mencoder on OS X.
Jessica Blank
jb at twu.net
Tue Jun 10 22:43:46 CEST 2003
OK. Attached are config.h and config.mak.
I just did a fresh CVS checkout of all of "main".
I ran ./configure --disable-altivec
I compiled it... and voila, it BREAKS. (Can't ANYTHING in the Unix world
JUST FREAKING COMPILE OUT OF THE BOX?!?!??!?!?!??!?!?
EVER?!?!?!??!?!?!??!)
The COMPLETE log of my entire configure/compile session is available at:
http://jb.twu.net/argh.txt ... the last few bits are below:
--------------------------------------------
ar: creating archive libMP3.a
make -C libmpeg2
gcc -c -O4 -pipe -ffast-math -fomit-frame-pointer -no-cpp-precomp -DSYS_DARWIN -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -I../libvo -I.. -DMPG12PLAY -o alloc.o alloc.c
gcc -c -O4 -pipe -ffast-math -fomit-frame-pointer -no-cpp-precomp -DSYS_DARWIN -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -I../libvo -I.. -DMPG12PLAY -o cpu_accel.o cpu_accel.c
gcc -c -O4 -pipe -ffast-math -fomit-frame-pointer -no-cpp-precomp -DSYS_DARWIN -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -I../libvo -I.. -DMPG12PLAY -o cpu_state.o cpu_state.c
{standard input}:33:Parameter syntax error (parameter 1)
{standard input}:34:Parameter syntax error (parameter 1)
{standard input}:35:Parameter syntax error (parameter 1)
{standard input}:36:Parameter syntax error (parameter 1)
{standard input}:37:Parameter syntax error (parameter 1)
{standard input}:38:Parameter syntax error (parameter 1)
{standard input}:39:Parameter syntax error (parameter 1)
{standard input}:40:Parameter syntax error (parameter 1)
{standard input}:41:Parameter syntax error (parameter 1)
{standard input}:42:Parameter syntax error (parameter 1)
{standard input}:43:Parameter syntax error (parameter 1)
{standard input}:44:Parameter syntax error (parameter 1)
{standard input}:45:Parameter syntax error (parameter 1)
{standard input}:46:Parameter syntax error (parameter 1)
{standard input}:47:Parameter syntax error (parameter 1)
{standard input}:48:Parameter syntax error (parameter 1)
{standard input}:49:Parameter syntax error (parameter 1)
{standard input}:50:Parameter syntax error (parameter 1)
{standard input}:51:Parameter syntax error (parameter 1)
{standard input}:52:Parameter syntax error (parameter 1)
{standard input}:53:Parameter syntax error (parameter 1)
{standard input}:54:Parameter syntax error (parameter 1)
{standard input}:55:Parameter syntax error (parameter 1)
{standard input}:61:Parameter syntax error (parameter 1)
{standard input}:62:Parameter syntax error (parameter 1)
{standard input}:63:Parameter syntax error (parameter 1)
{standard input}:64:Parameter syntax error (parameter 1)
{standard input}:65:Parameter syntax error (parameter 1)
{standard input}:66:Parameter syntax error (parameter 1)
{standard input}:67:Parameter syntax error (parameter 1)
{standard input}:68:Parameter syntax error (parameter 1)
{standard input}:69:Parameter syntax error (parameter 1)
{standard input}:70:Parameter syntax error (parameter 1)
{standard input}:71:Parameter syntax error (parameter 1)
{standard input}:72:Parameter syntax error (parameter 1)
{standard input}:73:Parameter syntax error (parameter 1)
{standard input}:74:Parameter syntax error (parameter 1)
{standard input}:75:Parameter syntax error (parameter 1)
{standard input}:76:Parameter syntax error (parameter 1)
{standard input}:77:Parameter syntax error (parameter 1)
{standard input}:78:Parameter syntax error (parameter 1)
{standard input}:79:Parameter syntax error (parameter 1)
{standard input}:80:Parameter syntax error (parameter 1)
{standard input}:81:Parameter syntax error (parameter 1)
{standard input}:82:Parameter syntax error (parameter 1)
{standard input}:83:Parameter syntax error (parameter 1)
make[1]: *** [cpu_state.o] Error 1
make: *** [libmpeg2/libmpeg2.a] Error 2
sh-2.05a#
--------------------------------------------
On Tue, 10 Jun 2003, Corey Hickey wrote:
> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> Jessica Blank wrote:
> >>It looks like something is strange with altivec.
> >>Send me your config.h + config.mak and I will see what I can do.
> >>After that I suggest that you try to disable altivec with
> >>"--disable-altivec", and report back if that helps.
> >
> >
> > Can I attach 'em?
> >
>
> config.h and config.mak are both rather small, so I would say yes, go
> ahead and attach them as is.
>
> The list has a limit on attachment size of something like 90K, but you
> won't go anywhere near that.
>
> -Corey
>
> _______________________________________________
> RTFM!!! http://www.MPlayerHQ.hu/DOCS
> Search: http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>
J e s s i c a L e a h B l a n k
-------------- next part --------------
# -------- Generated by configure -----------
LANG = C
LANGUAGES = en
TARGET_OS = Darwin
DESTDIR =
prefix = $(DESTDIR)/usr/local
BINDIR = $(DESTDIR)/usr/local/bin
DATADIR = $(DESTDIR)/usr/local/share/mplayer
MANDIR = $(DESTDIR)/usr/local/man
CONFDIR = $(DESTDIR)/usr/local/etc/mplayer
LIBDIR = $(DESTDIR)/usr/local/lib
#AR = ar
CC = gcc
AWK =
RANLIB = ranlib
INSTALL = install
# OPTFLAGS = -O4 -pipe -fomit-frame-pointer -ffast-math
OPTFLAGS = -O4 -pipe -ffast-math -fomit-frame-pointer -no-cpp-precomp -DSYS_DARWIN -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
EXTRA_INC =
STRIPBINARIES = yes
MPLAYER_NETWORK = yes
STREAMING_LIVE_DOT_COM = no
MPLAYER_NETWORK_LIB =
DVBIN = no
VIDIX = no
SHARED_PP = no
CONFIG_PP = yes
CONFIG_RISKY = yes
LIBMENU = no
I18NLIBS =
MATROSKA = no
MATROSKA_LIB =
OPENDIVX = no
UNRARLIB = yes
PNG = no
JPEG = no
GIF = no
EXTRA_LIB =
Z_LIB = -lz
HAVE_MLIB = no
WIN32_LIB =
STATIC_LIB =
X11_INC = -I/usr/X11R6/include
X11DIR = -L/usr/X11R6/lib -lXext -lX11
# for libavcodec:
SRC_PATH=.
# video output
X_LIB = -lGL -lXv -lXxf86vm -lXinerama -L/usr/X11R6/lib -lXext -lX11
GGI_LIB =
MLIB_LIB =
MLIB_INC =
DXR2_INC =
DVB_INC =
PNG_LIB =
JPEG_LIB =
GIF_LIB =
SDL_LIB =
SVGA_LIB =
AA_LIB =
# audio output
ALSA_LIB =
NAS_LIB =
ARTS_LIB =
ARTS_INC =
ESD_LIB =
ESD_INC =
SGIAUDIO_LIB =
# input/demuxer/codecs
TERMCAP_LIB = -ltermcap
LIRC_LIB =
LIRCC_LIB =
CSS_USE = no
CSS_LIB = -Llibmpdvdkit2 -lmpdvdkit
DVDKIT = no
DVDKIT2 = yes
DVDKIT_SHARED = no
SDL_INC =
W32_DEP =
W32_LIB =
DS_DEP =
DS_LIB =
AV_DEP =
AV_LIB =
FAME = no
FAME_LIB =
MP1E_DEP =
MP1E_LIB =
ARCH_LIB = -ldl
XVID = no
XVID_LIB =
DECORE_LIB =
MENCODER = yes
ENCORE_LIB = -lmp3lame
DIRECTFB_INC =
DIRECTFB_LIB =
CDPARANOIA_INC =
CDPARANOIA_LIB =
FREETYPE_INC =
FREETYPE_LIB =
FRIBIDI_INC =
FRIBIDI_LIB =
LIBLZO_LIB=
MAD_LIB =
VORBIS_LIB =
THEORA_LIB =
FAAD_LIB =
SMBSUPPORT_LIB =
XMMS_PLUGINS = no
XMMS_LIB =
MACOSX = yes
MACOSX_FRAMEWORKS = -framework Carbon -framework QuickTime -framework CoreAudio
# --- Some stuff for autoconfigure ----
TARGET_ARCH_POWERPC = yes
TARGET_CYGWIN = no
TARGET_MINGW32 = no
TARGET_CPU=ppc
TARGET_MMX = no
TARGET_MMX2 = no
TARGET_3DNOW = no
TARGET_3DNOWEX = no
TARGET_SSE = no
TARGET_ALTIVEC = no
# --- GUI stuff ---
GTKLIB =
GLIBLIB =
GTK_LIBS =
GUI = no
DEBUG = -DDEBUG
-------------- next part --------------
/* -------- This file has been automatically generated by configure ---------
Note: Any changes in it will be lost when you run configure again. */
/* use GNU internationalization */
#undef USE_I18N
/* use setlocale() function */
#define USE_SETLOCALE 1
/* Runtime CPU detection */
#undef RUNTIME_CPUDETECT
/* Dynamic a/v plugins */
#undef DYNAMIC_PLUGINS
/* "restrict" keyword */
#define restrict __restrict
#define PREFIX "/usr/local"
/* define this to use simple idct with patched libavcodec */
#define SIMPLE_IDCT 1
#define USE_OSD 1
#define USE_SUB 1
/* enable/disable SIGHANDLER */
#define ENABLE_SIGHANDLER 1
/* Toggles debugging informations */
#undef MP_DEBUG
/* Indicates that Ogle's libdvdread is available for DVD playback */
#define USE_DVDREAD 1
/* Indicates that dvdread is from libmpdvdkit */
#define USE_MPDVDKIT 2
/* Additional options for libmpdvdkit*/
#undef DVD_STRUCT_IN_DVD_H
#undef DVD_STRUCT_IN_LINUX_CDROM_H
#undef DVD_STRUCT_IN_SYS_CDIO_H
#undef DVD_STRUCT_IN_SYS_DVDIO_H
#undef DVD_STRUCT_IN_BSDI_DVDIOCTL_DVD_H
#undef HAVE_BSD_DVD_STRUCT
#undef HAVE_LINUX_DVD_STRUCT
#undef HAVE_OPENBSD_DVD_STRUCT
#define DARWIN_DVD_IOCTL
#undef SOLARIS_USCSI
#undef HPUX_SCTL_IO
#define HAVE_STDDEF_H 1
/* Common data directory (for fonts, etc) */
#define MPLAYER_DATADIR "/usr/local/share/mplayer"
#define MPLAYER_CONFDIR "/usr/local/etc/mplayer"
#define MPLAYER_LIBDIR "/usr/local/lib"
/* Define this to compile stream-caching support, it can be enabled via
-cache <kilobytes> */
#define USE_STREAM_CACHE 1
/* Define to include support for XviD/Divx4Linux/OpenDivx */
#undef USE_DIVX
/* Define to use the new XviD/DivX4Linux library instead of open source OpenDivX */
/* You have to change DECORE_LIBS in config.mak, too! */
#undef NEW_DECORE
/* Define if you are using DivX5Linux Decore library */
#undef DECORE_DIVX5
/* Define if you are using XviD library */
#undef HAVE_XVID
#undef DECORE_XVID
#undef ENCORE_XVID
/* Define to include support for libdv-0.9.5 */
#undef HAVE_LIBDV095
/* If build mencoder */
#define HAVE_MENCODER
/* Indicates if XviD/Divx4linux encore is available
Note: for mencoder */
#undef HAVE_DIVX4ENCORE
/* Indicates if libmp3lame is available
Note: for mencoder */
#define HAVE_MP3LAME 393
/* Define libmp1e for realtime mpeg encoding (for DXR3 and DVB cards) */
#undef USE_MP1E
/* Define this to enable avg. byte/sec-based AVI sync method by default:
(use -bps or -nobps commandline option for run-time method selection)
-bps gives better sync for vbr mp3 audio, it is now default */
#define AVI_SYNC_BPS 1
/* Undefine this if you do not want to select mono audio (left or right)
with a stereo MPEG layer 2/3 audio stream. The command line option
-stereo has three possible values (0 for stereo, 1 for left-only, 2 for
right-only), with 0 being the default.
*/
#define USE_FAKE_MONO 1
/* Undefine this if your sound card driver has no working select().
If you have kernel Oops, player hangups, or just no audio, you should
try to recompile MPlayer with this option disabled! */
#define HAVE_AUDIO_SELECT 1
/* define this to use iconv(3) function to codepage conversions */
#undef USE_ICONV
/* define this to use RTC (/dev/rtc) for video timers (LINUX only) */
#undef HAVE_RTC
/* set up max. outburst. use 65536 for ALSA 0.5, for others 16384 is enough */
#define MAX_OUTBURST 65536
/* set up audio OUTBURST. Do not change this! */
#define OUTBURST 512
/* Define this if your system has the header file for the OSS sound interface */
#undef HAVE_SYS_SOUNDCARD_H
/* Define this if your system has the header file for the OSS sound interface
* in /usr/include */
#undef HAVE_SOUNDCARD_H
/* Define this if your system has the sysinfo header */
#undef HAVE_SYS_SYSINFO_H
/* Define this if your system uses ftello() for off_t seeking */
#define HAVE_FTELLO 1
#ifndef HAVE_FTELLO
# define ftello(a) ftell(a)
#endif
/* Define this if your system has the "malloc.h" header file */
#undef HAVE_MALLOC_H
/* memalign is mapped to malloc if unsupported */
#undef HAVE_MEMALIGN
#ifndef HAVE_MEMALIGN
# define memalign(a,b) malloc(b)
#endif
/* Define this if your system has the "alloca.h" header file */
#undef HAVE_ALLOCA_H
/* Define this if your system has the "sys/mman.h" header file */
#define HAVE_SYS_MMAN_H 1
/* Define this if you have the elf dynamic linker -ldl library */
#define HAVE_LIBDL 1
/* Define this if you have the kstat kernel statistics library */
#undef HAVE_LIBKSTAT
/* Define this if you have zlib */
#define HAVE_ZLIB 1
/* Define this if you have shm support */
#define HAVE_SHM 1
/* Define this if your system has scandir & alphasort */
#define HAVE_SCANDIR 1
/* Define this if your system has strsep */
#define HAVE_STRSEP 1
/* Define this if your system has vsscanf */
#define HAVE_VSSCANF 1
/* Define this if your system has no posix select */
#undef HAVE_NO_POSIX_SELECT
/* Define this if your system has gettimeofday */
#define HAVE_GETTIMEOFDAY 1
/* Define this if your system has glob */
#define HAVE_GLOB 1
/* LIRC (remote control, see www.lirc.org) support: */
#undef HAVE_LIRC
/*
* LIRCCD (LIRC client daemon)
* See http://www.dolda2000.cjb.net/~fredrik/lirccd/
*/
#undef HAVE_LIRCC
/* DeCSS support using libcss */
#undef HAVE_LIBCSS
/* DVD navigation support using libdvdnav */
#undef USE_DVDNAV
/* Define this to enable MPEG 1/2 image postprocessing (requires a FAST CPU!) */
#define MPEG12_POSTPROC 1
/* Define this to enable image postprocessing in libavcodec (requires a FAST CPU!) */
#undef FF_POSTPROCESS
/* Define to include support for OpenDivx postprocessing */
#undef HAVE_ODIVX_POSTPROCESS
/* Win32 DLL support */
#undef USE_WIN32DLL
#define WIN32_PATH ""
/* DirectShow support */
#undef USE_DIRECTSHOW
/* Mac OS X specific features */
#define MACOSX 1
/* Build our Win32-loader */
/* ffmpeg's libavcodec support (requires libavcodec source) */
#undef USE_LIBAVCODEC
#undef USE_LIBAVCODEC_SO
/* risky codecs */
#define CONFIG_RISKY 1
/* Use libavcodec's decoders */
#define CONFIG_DECODERS 1
/* Use libavcodec's encoders */
#define CONFIG_ENCODERS 1
/* Use codec libs included in mplayer CVS / source dist: */
#define USE_MP3LIB
#define USE_LIBA52
#define USE_LIBMPEG2
/* Use the SVQ1 decoder in libmpcodecs - we don't want/need it with libavcodec */
#ifndef USE_LIBAVCODEC
#define USE_SVQ1
#endif
/* Use libfame encoder filter */
#undef USE_LIBFAME
/* XAnim DLL support */
#undef USE_XANIM
/* Default search path */
#undef XACODEC_PATH
/* RealPlayer DLL support */
#undef USE_REALCODECS
/* Default search path */
#undef REALCODEC_PATH
/* LIVE.COM Streaming Media library support */
#undef STREAMING_LIVE_DOT_COM
/* Use 3dnow/mmxext/sse/mmx optimized fast memcpy() [maybe buggy... signal 4]*/
#define USE_FASTMEMCPY 1
/* Use unrarlib for Vobsubs */
#define USE_UNRARLIB 1
/* gui support, please do not edit this option */
#undef HAVE_NEW_GUI
/* Audio output drivers */
#undef USE_OSS_AUDIO
#define PATH_DEV_DSP ""
#define PATH_DEV_MIXER ""
#undef HAVE_ALSA5
#undef HAVE_ALSA9
#undef USE_ESD
#undef HAVE_ESD_LATENCY
#undef HAVE_SYS_ASOUNDLIB_H
#undef HAVE_ALSA_ASOUNDLIB_H
#undef USE_SUN_AUDIO
#undef USE_SGI_AUDIO
#undef HAVE_WIN32WAVEOUT
#undef HAVE_NAS
/* Enable fast OSD/SUB renderer (looks ugly, but uses less CPU power) */
#undef FAST_OSD
#undef FAST_OSD_TABLE
/* Enable TV Interface support */
#define USE_TV 1
/* Enable EDL support */
#define USE_EDL
/* Enable Video 4 Linux TV interface support */
#undef HAVE_TV_V4L
/* Enable *BSD BrookTree TV interface support */
#undef HAVE_TV_BSDBT848
/* Define if your processor stores words with the most significant
byte first (like Motorola and SPARC, unlike Intel and VAX). */
#define WORDS_BIGENDIAN 1
#define ARCH_POWERPC 1
/* libmpeg2 wants ARCH_PPC and the rest of mplayer use ARCH_POWERPC,
* define ARCH_PPC if ARCH_POWERPC is set to cope with that.
*/
#ifdef ARCH_POWERPC
#define ARCH_PPC 1
#endif
/* Define this for Cygwin build for win32 */
/* Define this to any prefered value from 386 up to infinity with step 100 */
#define __CPU__ ppc
#define MP_WORDSIZE 32
#undef TARGET_LINUX
#undef HAVE_VCD
#ifdef sun
#define DEFAULT_CDROM_DEVICE "/vol/dev/aliases/cdrom0"
#define DEFAULT_DVD_DEVICE DEFAULT_CDROM_DEVICE
#elif defined(HPUX)
#define DEFAULT_CDROM_DEVICE "/dev/cdrom"
#define DEFAULT_DVD_DEVICE "/dev/dvd"
#elif defined(WIN32)
#define DEFAULT_CDROM_DEVICE "D:"
#define DEFAULT_DVD_DEVICE "D:"
#elif defined(SYS_DARWIN)
#define DEFAULT_CDROM_DEVICE "/dev/rdiskN"
#define DEFAULT_DVD_DEVICE DEFAULT_CDROM_DEVICE
#else
#define DEFAULT_CDROM_DEVICE "/dev/cdrom"
#define DEFAULT_DVD_DEVICE "/dev/dvd"
#endif
/*----------------------------------------------------------------------------
**
** NOTE: Instead of modifying these definitions here, use the
** --enable/--disable options of the ./configure script!
** See ./configure --help for details.
**
*---------------------------------------------------------------------------*/
/* C99 lrintf function available */
#define HAVE_LRINTF 1
/* nanosleep support */
#define HAVE_NANOSLEEP 1
/* SMB support */
#undef LIBSMBCLIENT
/* termcap flag for getch2.c */
#define USE_TERMCAP 1
/* termios flag for getch2.c */
#define HAVE_TERMIOS 1
#undef HAVE_TERMIOS_H
#define HAVE_SYS_TERMIOS_H 1
/* enable PNG support */
#undef HAVE_PNG
/* enable JPEG support */
#undef HAVE_JPEG
/* enable GIF support */
#undef HAVE_GIF
#undef HAVE_GIF_4
/* enable FreeType support */
#undef HAVE_FREETYPE
/* enable FriBiDi usage */
#undef USE_FRIBIDI
/* liblzo support */
#undef USE_LIBLZO
/* libmad support */
#undef USE_LIBMAD
/* enable OggVorbis support */
#undef HAVE_OGGVORBIS
/* enable Tremor as vorbis decoder */
#undef TREMOR
/* enable OggTheora support */
#undef HAVE_OGGTHEORA
/* enable Matroska support */
#undef HAVE_MATROSKA
/* enable FAAD (AAC) support */
#undef HAVE_FAAD
/* enable network */
#define MPLAYER_NETWORK 1
/* define this to use inet_aton() instead of inet_pton() */
#undef USE_ATON
/* enables / disables cdparanoia support */
#undef HAVE_CDDA
/* enables / disables VIDIX usage */
#undef CONFIG_VIDIX
/* enables / disables new input joystick support */
#undef HAVE_JOYSTICK
/* enables / disables new config */
#define NEW_CONFIG 1
/* enables / disables QTX codecs */
#undef USE_QTX_CODECS
/* enables / disables osd menu */
#undef HAVE_MENU
/* enables / disables subtitles sorting */
#define USE_SORTSUB 1
/* XMMS input plugin support */
#undef HAVE_XMMS
#define XMMS_INPUT_PLUGIN_DIR ""
/* enables inet6 support */
#define HAVE_AF_INET6 1
/* do we have gethostbyname2? */
#define HAVE_GETHOSTBYNAME2 1
/* Extension defines */
#undef HAVE_3DNOW // only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.)
#undef HAVE_3DNOWEX // only define if you have 3DNOWEX (AMD Athlon, etc.)
#undef HAVE_MMX // only define if you have MMX (newer x86 chips, not P54C/PPro)
#undef HAVE_MMX2 // only define if you have MMX2 (Athlon/PIII/4/CelII)
#undef HAVE_SSE // only define if you have SSE (Intel Pentium III/4 or Celeron II)
#undef HAVE_SSE2 // only define if you have SSE2 (Intel Pentium 4)
#undef HAVE_ALTIVEC // only define if you have Altivec (G4)
#ifdef HAVE_MMX
#define USE_MMX_IDCT 1
#endif
#undef HAVE_ALTIVEC_H // enables usage of altivec.h
#undef HAVE_MLIB // Sun mediaLib, available only on solaris
/* libmpeg2 uses a different feature test macro for mediaLib */
#ifdef HAVE_MLIB
#define LIBMPEG2_MLIB 1
#endif
/* libvo options */
#define SCREEN_SIZE_X 1
#define SCREEN_SIZE_Y 1
#define HAVE_X11 1
#define HAVE_XV 1
#define HAVE_XF86VM 1
#define HAVE_XINERAMA 1
#define HAVE_GL 1
#undef HAVE_DGA
#undef HAVE_DGA2
#undef HAVE_SDL
/* defined for SDLlib with keyrepeat bugs (before 1.2.1) */
#undef HAVE_DIRECTX
#undef HAVE_GGI
#undef HAVE_3DFX
#undef HAVE_TDFXFB
#undef HAVE_TDFX_VID
#undef HAVE_DIRECTFB
#undef HAVE_ZR
#undef HAVE_BL
#undef HAVE_MGA
#undef HAVE_XMGA
#undef HAVE_FBDEV
#undef USE_CONVERT2FB
#undef HAVE_DXR2
#undef HAVE_DXR3
#undef HAVE_DVB
#undef HAS_DVBIN_SUPPORT
#undef HAVE_SVGALIB
#undef HAVE_VESA
#define HAVE_XDPMS 1
#undef HAVE_AA
/* used by GUI: */
#if defined(HAVE_GL) || defined(HAVE_X11) || defined(HAVE_XV)
#define X11_FULLSCREEN 1
#endif
More information about the MPlayer-users
mailing list