[MPlayer-users] BUG: ATI Rage128 + TV-out using VESA and VIDIX
Jacek Konieczny
jajcus at bnet.pl
Tue Mar 11 17:49:23 CET 2003
Hello,
I have a graphics card with TV-out based on ATI Rage 128 chipset.
I wanted to watch DVD movies on my TV. Problems with TV-out and
ATI cards in Linux are known, and the only solution seems VESA
--- as framebufer device for XFree or separate output driver in
mplayer. I have chosen the second solution.
When I start mplayer like this:
mplayer -vo vesa -double -dvd 1
Everything works fine, but only for movies with 4:3 aspect ratio.
When the movie has 16:9 aspect ratio I get image stretched horizontaly
on screen (but not to the full height).
When I give -zoom option aspect is OK on monitor, but TV gets dark.
I have also tried "-vo vesa:vidix" as it is said (in the documentation)
to be the only output driver where both TV-out and hardware scaling are
possible with ATI, but it doesn't work at all.
mplayer seems to crash and leave console in graphics mode making it
unusable.
There is mplayer log attached and additional system information.
Greets,
Jacek
-------------- next part --------------
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale
MPlayer dev-CVS-030309-12:01-2.95.4 (C) 2000-2003 Arpad Gereoffy (see DOCS)
CPU: Advanced Micro Devices Athlon TB Thunderbird (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx
Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/.mplayer/config
Reading /home/.mplayer/codecs.conf: can't open '/home/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: can't open '/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf
Failed to open /dev/rtc: No such file or directory (mplayer should be setuid root or /dev/rtc should be readable by the user.)
font: can't open file: /home/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using usleep() timing
Can't open input config file /home/.mplayer/input.conf : No such file or directory
Can't open input config file /usr/local/etc/mplayer/input.conf : No such file or directory
Falling back on default (hardcoded) input config
Playing DVD title 1
Reading disc structure, please wait...
There are 1 titles on this DVD.
There are 18 chapters in this DVD title.
There are 1 angles in this DVD title.
DVD successfully opened.
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 3) 25.00 fps 4007.0 kbps (500.9 kbyte/s)
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using 3DNowEx optimized IMDCT transform
AC3: 5.1 (3f+2r+lfe) 48000 Hz 448.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 56000->192000 (448.0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
libdha: DHA kernelhelper failed: No such file or directory
libdha: DHA kernelhelper failed: No such file or directory
[mga] No supported cards found
[mga] No supported cards found
[rage128] Found chip: Rage 128 RF/SG AGP
[rage128] Video memory = 16Mb
[rage128] Set write-combining type of video memory
[rage128] Saved overlay colorkey settings
VIDIX: Description: BES driver for Rage128 cards
VIDIX: Author: Nick Kurshev
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred csp: Mpeg PES)
VDec: using Mpeg PES as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vesa] 720x576 => 1024x576 Mpeg PES
[?25lvo_vesa: Found VESA VBE BIOS Version 2.0 Revision: 100
vo_vesa: Video memory: 16384 Kb
vo_vesa: VESA Capabilities: 8-bit DAC, VGA CRTC, normal RAMDAC, no stereoscopic, no stereo
vo_vesa: !!! Below will be printed OEM info. !!!
vo_vesa: You should watch 5 OEM related lines below else you've broken vm86
vo_vesa: OEM info: ATI RAGE128
vo_vesa: OEM Revision: 100
vo_vesa: OEM vendor: ATI Technologies Inc.
vo_vesa: OEM Product Name: R128
vo_vesa: OEM Product Rev: 01.00
vo_vesa: Hint: To get workable TV-Out you should have plugged tv-connector in
vo_vesa: before booting PC since VESA BIOS initializes itself only during POST
FATAL: Cannot initialize video driver.
vo_vesa: Using VESA mode (40) = 114 [800x600 at 16]
vo_vesa: Using DGA (physical resources: E4000000h, 01000000h)
vosub_vidix: unsupported fourcc for this vidix driver: 4d504553 (Mpeg PES)
vo_vesa: Can't initialize VIDIX driver
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
VDec: vo config request - 720 x 576 (preferred csp: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [vesa] 720x576 => 1024x576 Planar YV12
[?25lvo_vesa: Found VESA VBE BIOS Version 2.0 Revision: 100
vo_vesa: Video memory: 16384 Kb
vo_vesa: VESA Capabilities: 8-bit DAC, VGA CRTC, normal RAMDAC, no stereoscopic, no stereo
vo_vesa: !!! Below will be printed OEM info. !!!
vo_vesa: You should watch 5 OEM related lines below else you've broken vm86
vo_vesa: OEM info: ATI RAGE128
vo_vesa: OEM Revision: 100
vo_vesa: OEM vendor: ATI Technologies Inc.
vo_vesa: OEM Product Name: R128
vo_vesa: OEM Product Rev: 01.00
vo_vesa: Hint: To get workable TV-Out you should have plugged tv-connector in
vo_vesa: before booting PC since VESA BIOS initializes itself only during POST
vo_vesa: Using VESA mode (40) = 114 [800x600 at 16]
SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
vo_vesa: Using DGA (physical resources: E4000000h, 01000000h)
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
A: 0.3 V: 0.0 A-V: 0.284 ct: 0.000 1/ 1 0% 0% 0.0% 0 0 0%
vosub_vidix: Error unoptimized draw_slice was called
Exiting...[rage128] Restored overlay colorkey settings
-------------- next part --------------
gcc-2.95.4-0.20010823.3
glibc-2.2.5-22
binutils-2.11.90.0.19-4
kernel: vanila 2.4.20
-------------- next part --------------
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1003.434
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1998.84
-------------- next part --------------
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: e4000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at a000 [size=16]
Capabilities: <available only to root>
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at a400 [size=32]
Capabilities: <available only to root>
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at a800 [size=32]
Capabilities: <available only to root>
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 11
Capabilities: <available only to root>
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. Onboard Audio on EP7KXA
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at ac00 [size=256]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at b400 [size=4]
Capabilities: <available only to root>
00:08.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
Subsystem: Unknown device 4942:4c4c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at b800 [size=64]
00:09.0 SCSI storage controller: Adaptec AIC-7892B U160/m (rev 02)
Subsystem: Adaptec 19160 Ultra160 SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
BIST result: 00
Region 0: I/O ports at bc00 [disabled] [size=256]
Region 1: Memory at eb000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at eb001000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at eb002000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0048
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
More information about the MPlayer-users
mailing list