[MPlayer-users] MPlayer 1.0pre1-2.95.4 bug
Javier Ventura Nicolás
javier.ventura at wanadoo.es
Sat Sep 6 18:46:47 CEST 2003
Hi all.
(excuse my bad english)
I think I found a bug in the MPlayer 1.0pre1-2.95.4, so there it goes:
When playing a group of files or one file with the '-loop 0' option (as a global option), always crashes (or freezes) when playing the second file. Just to be more graphical: the second window always crashes/freezes.
It happens: -vo x11|gl|gl2
It doesn't happen: -vo null|sdl
It also doesn't happen with gmplayer.
I've reproduced it in many situations: a single file with '-loop 0', a set of files, command-line, double-click on nautilus (it's set to open video files with "mplayer -loop 0"), and with sawfish and windowmaker as window managers.
Another thing that happens is that if I switch to fullscreen during second playing, or maximize the window, it causes to crash/freeze inmediately.
########################################################################
### System information ###############################################
########################################################################
###Distro: Debian 3.0
###uname -a
Linux foxy-lady 2.4.20 #2 dom jun 22 20:55:26 CEST 2003 i686 unknown
###ls -l /lib/libc[.-]*
-rwxr-xr-x 1 root root 1153784 abr 28 2002 /lib/libc-2.2.5.so
lrwxrwxrwx 1 root root 13 ene 25 2003 /lib/libc.so.6 -> libc-2.2.5.so
###X -version
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86 at XFree86.Org and patches submitted
to fixes at XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.1.1 (Debian 4.2.1-3.bunk.5 20030717075538 bunk@) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-1-686 i686 [ELF]
Module Loader present
###gcc -v
Reading specs from /usr/lib/gcc-lib/i386-linux/2.95.4/specs
gcc version 2.95.4 20011002 (Debian prerelease)
###ld -v
GNU ld versión 2.12.90.0.1 20020307 Debian/GNU Linux
###cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) XP 1800+
stepping : 2
cpu MHz : 1527.719
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3047.42
###lspci -vv
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: d4000000-d5ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1a) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. AC97 Audio Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at e000 [size=4]
Region 2: I/O ports at e400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d4000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
#####################################################################
### mplayer.log #################################################
#####################################################################
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale
MPlayer 1.0pre1-2.95.4 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
Reading config file /usr/local/etc/mplayer/mplayer.conf: No existe el fichero o el directorio
Reading config file /home/javi/.mplayer/config
Reading /home/javi/.mplayer/codecs.conf: This codecs.conf is too old and incompatible with this MPlayer release! at line 6
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': No existe el fichero o el directorio
Using built-in default codecs.conf
CommandLine: '-v' 'jal01.mpg' 'jal02.mpg' 'jal03.mpg'
get_path('font/font.desc') -> '/home/javi/.mplayer/font/font.desc'
Font /home/javi/.mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permiso denegado
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using usleep() timing
get_path('input.conf') -> '/home/javi/.mplayer/input.conf'
Can't open input config file /home/javi/.mplayer/input.conf: No existe el fichero o el directorio
Can't open input config file /usr/local/etc/mplayer/input.conf: No existe el fichero o el directorio
Falling back on default (hardcoded) input config
get_path('jal01.mpg.conf') -> '/home/javi/.mplayer/jal01.mpg.conf'
Playing jal01.mpg
[file] File size is 847876 bytes
STREAM: [file] jal01.mpg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x84cdf98
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x84cdf98
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x84cdf98
Checking for REAL
DEMUXER: freeing demuxer at 0x84cdf98
Checking for SMJPEG
DEMUXER: freeing demuxer at 0x84cdf98
DEMUXER: freeing demuxer at 0x84ce938
Searching demuxer type for filename jal01.mpg ext: .mpg
Checking for MOV
DEMUXER: freeing demuxer at 0x84ce938
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing demuxer at 0x84ce938
Checking for PVA
DEMUXER: freeing demuxer at 0x84ce938
Checking for MPEG-TS...
TRIED UP TO POSITION 70378, FOUND 0, packet_size= 71
DEMUXER: freeing demuxer at 0x84ce938
system stream synced at 0xB (0)!
==> Found video stream: 0
MPEG-PS file format detected.
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO: MPEG1 352x240 (aspect 12) 29,970 fps 0,0 kbps ( 0,0 kbyte/s)
[V] filefmt:2 fourcc:0x10000001 size:352x240 fps:29,97 ftime:=0,0334
get_path('sub/') -> '/home/javi/.mplayer/sub/'
get_path('default.sub') -> '/home/javi/.mplayer/default.sub'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: made decode tables with MMX optimization
mp3lib: using 3DNow!Ex optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 44100 Hz 64 kbit Single-Channel, BPF: 209
Channels: 1, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8000->176400 (64,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
X11 opening display: :0.0
vo: X11 color mask: FFFF (R:F800 G:7E0 B:1F)
vo: X11 running at 1280x1024 with depth 16 and 16 bpp (":0.0" => local display)
[x11] Detected wm supports layers.
[x11] Detected wm supports NetWM.
[x11] Current fstype setting honours LAYER X atoms
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
Trying filter chain: vo
Could not find matching colorspace - retrying with -vop scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale vo
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 32/32 (4096 bytes/frag) free: 131072
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2
Starting playback...
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO Config (352x240->352x264,flags=4,'MPlayer',0x32315659)
VO: [x11] 352x240 => 352x264 Planar YV12 [zoom]
VO: Description: X11 ( XImage/Shm )
VO: Author: Aaron Holtzman <aholtzma at ess.engr.uvic.ca>
Sharing memory.
SwScaler: using unscaled Planar YV12 -> BGR 16-bit special converter
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A: 0,4 V: 0,0 A-V: 0,347 ct: 0,000 1/ 1 0% 0% 0,0% 0 0 0%
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A: 0,4 V: 0,3 A-V: 0,123 ct: 0,003 2/ 2 0% 0% 0,0% 0 0 0%
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A: 0,4 V: 0,3 A-V: 0,094 ct: 0,007 3/ 3 0% 0% 0,0% 0 0 0%
A: 0,4 V: 0,4 A-V: 0,081 ct: 0,010 4/ 4 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,4 A-V: 0,080 ct: 0,013 5/ 5 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,4 A-V: 0,076 ct: 0,017 6/ 6 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,5 A-V: 0,073 ct: 0,020 7/ 7 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,5 A-V: 0,071 ct: 0,023 8/ 8 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,5 A-V: 0,066 ct: 0,027 9/ 9 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,6 A-V: 0,045 ct: 0,030 10/ 10 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,6 A-V: 0,042 ct: 0,033 11/ 11 0% 0% 0,0% 0 0 0%
A: 0,7 V: 0,6 A-V: 0,038 ct: 0,037 12/ 12 0% 0% 0,0% 0 0 0%
A: 0,7 V: 0,7 A-V: 0,035 ct: 0,040 13/ 13 0% 0% 0,0% 0 0 0%
A: 0,7 V: 0,7 A-V: 0,032 ct: 0,043 14/ 14 0% 0% 0,0% 0 0 0%
A: 0,7 V: 0,7 A-V: 0,028 ct: 0,046 15/ 15 0% 0% 0,0% 0 0 0%
A: 0,8 V: 0,8 A-V: 0,026 ct: 0,049 16/ 16 15% 7% 0,9% 0 0 0%
A: 0,8 V: 0,8 A-V: 0,021 ct: 0,051 17/ 17 14% 7% 0,8% 0 0 0%
A: 0,9 V: 0,8 A-V: 0,050 ct: 0,054 18/ 18 14% 7% 0,9% 0 0 0%
A: 0,9 V: 0,9 A-V: 0,020 ct: 0,056 19/ 19 13% 7% 0,8% 0 0 0%
A: 0,9 V: 0,9 A-V: 0,020 ct: 0,058 20/ 20 12% 7% 0,8% 0 0 0%
A: 0,9 V: 0,9 A-V: 0,016 ct: 0,060 21/ 21 12% 7% 0,8% 0 0 0%
A: 1,0 V: 1,0 A-V: 0,013 ct: 0,061 22/ 22 11% 7% 0,7% 0 0 0%
A: 1,0 V: 1,0 A-V: 0,023 ct: 0,063 23/ 23 11% 7% 0,7% 0 0 0%
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
A: 0,0 V: 0,0 A-V: 0,000 ct: 0,000 23/ 23 0% 0% 0,0% 0 0 0%
EOF code: 1
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: mp3lib
uninit video: libmpeg2
DEMUXER: freeing demuxer at 0x84ce938
DEMUXER: freeing sh_audio at 0x84d6418
DEMUXER: freeing sh_video at 0x84d1330
get_path('jal02.mpg.conf') -> '/home/javi/.mplayer/jal02.mpg.conf'
Playing jal02.mpg
[file] File size is 847876 bytes
STREAM: [file] jal02.mpg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for YUV4MPEG2
DEMUXER: freeing demuxer at 0x854af98
ASF_check: not ASF guid!
DEMUXER: freeing demuxer at 0x854af98
Checking for NuppelVideo
DEMUXER: freeing demuxer at 0x854af98
Checking for REAL
DEMUXER: freeing demuxer at 0x854af98
Checking for SMJPEG
DEMUXER: freeing demuxer at 0x854af98
DEMUXER: freeing demuxer at 0x854b938
Searching demuxer type for filename jal02.mpg ext: .mpg
Checking for MOV
DEMUXER: freeing demuxer at 0x854b938
Checking for VIVO
header block 1 size: 0
DEMUXER: freeing demuxer at 0x854b938
DEMUXER: freeing demuxer at 0x854b938
DEMUXER: freeing demuxer at 0x854b938
DEMUXER: freeing demuxer at 0x854b938
DEMUXER: freeing demuxer at 0x854b938
DEMUXER: freeing demuxer at 0x854b938
DEMUXER: freeing demuxer at 0x854b938
Checking for PVA
DEMUXER: freeing demuxer at 0x854e2e0
Checking for MPEG-TS...
TRIED UP TO POSITION 70581, FOUND 0, packet_size= 71
DEMUXER: freeing demuxer at 0x854e2e0
system stream synced at 0xB (0)!
==> Found video stream: 0
MPEG-PS file format detected.
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO: MPEG1 352x240 (aspect 12) 29,970 fps 0,0 kbps ( 0,0 kbyte/s)
[V] filefmt:2 fourcc:0x10000001 size:352x240 fps:29,97 ftime:=0,0334
get_path('sub/') -> '/home/javi/.mplayer/sub/'
get_path('default.sub') -> '/home/javi/.mplayer/default.sub'
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
mp3lib: made decode tables with MMX optimization
mp3lib: using 3DNow!Ex optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 44100 Hz 64 kbit Single-Channel, BPF: 209
Channels: 1, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 8000->176400 (64,0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
Trying filter chain: vo
Could not find matching colorspace - retrying with -vop scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale vo
The selected video_out device is incompatible with this codec.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
[libaf] Adding filter dummy
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
ao2: 44100 Hz 2 chans Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 32/32 (4096 bytes/frag) free: 131072
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2
[dummy] Was reinitialized, rate=44100Hz, nch = 2, format = 0x00000001 and bps = 2
Starting playback...
VDec: vo config request - 352 x 240 (preferred csp: Planar YV12)
Trying filter chain: vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1,33:1 - prescaling to correct movie aspect.
VO Config (352x240->352x264,flags=4,'MPlayer',0x32315659)
VO: [x11] 352x240 => 352x264 Planar YV12 [zoom]
VO: Description: X11 ( XImage/Shm )
VO: Author: Aaron Holtzman <aholtzma at ess.engr.uvic.ca>
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A: 0,4 V: 0,0 A-V: 0,348 ct: 0,003 1/ 1 0% 0% 0,0% 0 0 0%
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A: 0,4 V: 0,3 A-V: 0,124 ct: 0,007 2/ 2 0% 0% 0,0% 0 0 0%
*** [vo] Allocating mp_image_t, 352x240x12bpp YUV planar, 126720 bytes
A: 0,4 V: 0,3 A-V: 0,095 ct: 0,010 3/ 3 0% 0% 0,0% 0 0 0%
A: 0,4 V: 0,4 A-V: 0,081 ct: 0,013 4/ 4 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,4 A-V: 0,077 ct: 0,017 5/ 5 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,4 A-V: 0,074 ct: 0,020 6/ 6 0% 0% 0,0% 0 0 0%
A: 0,5 V: 0,5 A-V: 0,070 ct: 0,023 7/ 7 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,5 A-V: 0,067 ct: 0,027 8/ 8 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,5 A-V: 0,064 ct: 0,030 9/ 9 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,6 A-V: 0,033 ct: 0,033 10/ 10 0% 0% 0,0% 0 0 0%
A: 0,6 V: 0,6 A-V: 0,039 ct: 0,037 11/ 11 0% 0% 0,0% 0 0 0%
A: 0,7 V: 0,6 A-V: 0,036 ct: 0,040 12/ 12 0% 0% 0,0% 0 0 0%
A: 0,7 V: 0,7 A-V: 0,032 ct: 0,043 13/ 13 0% 0% 0,0% 0 0 0%
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: audio)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
A: 0,0 V: 0,0 A-V: 0,000 ct: 0,000 13/ 13 0% 0% 0,0% 0 0 0%
EOF code: 1
Uninit audio filters...
[libaf] Removing filter dummy
uninit audio: mp3lib
uninit video: libmpeg2
DEMUXER: freeing demuxer at 0x854e2e0
DEMUXER: freeing sh_audio at 0x8553e08
DEMUXER: freeing sh_video at 0x854ec80
MPlayer interrupted by signal 11 in module: uninit_vo
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. For details, see DOCS/en/bugreports.html#crash
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
vo: uninit ...
#################################
Sometimes instead of signal 11, it says signal 6. I think it occurs when the window freezes instead of crashing, but I'm not sure about that.
Other times, it apperas a message saying something like 'X11 error: BadGC (invalid GC parameter)'.
### My config file:
# Write your default config options here!
vo=x11
ao=oss
zoom=yes
framedrop = yes
............................
Hope this is helpful, thanks.
Javi
More information about the MPlayer-users
mailing list