[MPlayer-users] Suse 10.0 glibc crash
Phil Payne
phil at payneinthe.com
Mon Mar 27 18:05:31 CEST 2006
Giacomo Comes wrote:
> On Mon, Mar 27, 2006 at 02:05:18PM +0100, Phil Payne wrote:
>
>> Hi,
>>
>> I'm trying to play an mpeg4 file using the packman package of mplayer on
>> Suse 10.0 and it (and others) are regularly crashing at startup with the
>> following output:
>>
>> *** glibc detected *** double free or corruption (!prev): 0x0874de28 ***
>> MPlayer interrupted by signal 6 in module: video_read_frame
>>
>> Now... I would compile the latest version of mplayer and try again but
>> the gcc version on Suse is not correct for this and I'm not enough of a
>> Linux expert to play around with changing the gcc version.
>>
>
> You don't need to replace gcc that came with suse.
> Just compile one, install in a temporary place and use it to compile mplayer.
> Example:
>
> #download gcc-core-3.4.0.tar.bz2
> tar fjx gcc-core-3.4.0.tar.bz2
> mkdir obj
> cd obj
> ../gcc-3.4.0/configure --prefix=/tmp/gcc
> make bootstrap-lean CFLAGS='-O2' LIBCFLAGS='-O2' LIBCXXFLAGS='-O2 -fno-implicit-templates'
> make install
> PATH=/tmp/gcc/bin:$PATH
> #now the new gcc will be used instead of the default one
> cd <MPlayer source>
> ./configure <options>
> make
> make install
>
> Giacomo
>
>
Thanks, I learned something today. I installed gcc 3.4.6. That got me
compiling but a get a new problem. Can you help resolve?
I used ./configure with no options, then make and I get a failure:
gcc -c -I../libvo -I../../libvo -fno-PIC -O4 -march=pentium4
-mtune=pentium4 -pipe -ffast-math -fomit-frame-pointer -D_REENTRANT
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I. -Inative -I..
-I../libmpdemux -I../loader -D_GNU_SOURCE -o ve_x264.o ve_x264.c
ve_x264.c: In function `config':
ve_x264.c:219: error: structure has no member named `i_rc_buffer_size'
ve_x264.c:221: error: structure has no member named `i_rc_init_buffer'
ve_x264.c:223: error: structure has no member named `i_rc_init_buffer'
ve_x264.c:224: error: structure has no member named `i_rc_sens'
make[1]: *** [ve_x264.o] Error 1
make[1]: Leaving directory
`/home/philipp/Software/mplayer/MPlayer-1.0pre7try2/libmpcodecs'
make: *** [libmpcodecs/libmpcodecs.a] Error 2
Cheers,
Phil.
>> Interestingly, the same file when using FreeBSD and a compiled MPlayer
>> plays fine, so... I'm assuming its something to do with how I have
>> installed Suse + MPlayer, rather than something specific to MPlayer. Can
>> anyone out there help me?
>>
>> Full output below.
>>
>> Thanks,
>> Phil.
>>
>>
>>
>>
>> MPlayer 1.0pre7try2-4.0.2 (C) 2000-2005 MPlayer Team
>> CPU: Intel Pentium 4/Xeon Willamette (Family: 8, Stepping: 2)
>> Detected cache-line size is 64 bytes
>> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
>> Compiled with runtime CPU detection - WARNING - this is not optimal!
>> To get best performance, recompile MPlayer with
>> --disable-runtime-cpudetection.
>>
>>
>> CommandLine: '-v' 'c.avi'
>> init_freetype
>> get_path('font/font.desc') -> '/home/philipp/.mplayer/font/font.desc'
>> font: can't open file: /home/philipp/.mplayer/font/font.desc
>> Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
>> Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
>> Failed to open /dev/rtc: Permission denied (it should be readable by the
>> user.)
>> Using nanosleep() timing
>> get_path('input.conf') -> '/home/philipp/.mplayer/input.conf'
>> Can't open input config file /home/philipp/.mplayer/input.conf: No such
>> file or directory
>> Parsing input config file /etc/mplayer/input.conf
>> Input config file /etc/mplayer/input.conf parsed: 59 binds
>> Opening joystick device /dev/input/js0
>> Can't open joystick device /dev/input/js0 : No such file or directory
>> Can't init input joystick
>> get_path('c.avi.conf') -> '/home/philipp/.mplayer/c.avi.conf'
>> Playing c.avi.
>> [file] File size is 726308310 bytes
>> STREAM: [file] c.avi
>> STREAM: Description: File
>> STREAM: Author: Albeu
>> STREAM: Comment: based on the code from ??? (probably Arpi)
>> AVI file format detected.
>> list_end=0x13A
>> ======= AVI Header =======
>> us/frame: 41708 (fps=23.976)
>> max bytes/sec: 0
>> padding: 0
>> MainAVIHeader.dwFlags: (2320) HAS_INDEX IS_INTERLEAVED TRUST_CKTYPE
>> frames total: 164524 initial: 0
>> streams: 2
>> Suggested BufferSize: 0
>> Size: 608 x 342
>> ==========================
>> list_end=0xD4
>> ==> Found video stream: 0
>> ====== STREAM Header =====
>> Type: vids FCC: DIVX (58564944)
>> Flags: 0
>> Priority: 0 Language: 0
>> InitialFrames: 0
>> Rate: 2997/125 = 23.976
>> Start: 0 Len: 164524
>> Suggested BufferSize: 94165
>> Quality 0
>> Sample size: 0
>> ==========================
>> found 'bih', 40 bytes of 40
>> ======= VIDEO Format ======
>> biSize 40
>> biWidth 608
>> biHeight 342
>> biPlanes 1
>> biBitCount 24
>> biCompression 1482049860='DIVX'
>> biSizeImage 623808
>> ===========================
>> Regenerating keyframe table for MPEG4 video
>> list_end=0x13A
>> ==> Found audio stream: 1
>> ====== STREAM Header =====
>> Type: auds FCC: (2000)
>> Flags: 0
>> Priority: 0 Language: 0
>> InitialFrames: 16
>> Rate: 16000/512 = 31.250
>> Start: 0 Len: 214440
>> Suggested BufferSize: 7680
>> Quality 0
>> Sample size: 512
>> ==========================
>> found 'wf', 18 bytes of 18
>> ======= WAVE Format =======
>> Format Tag: 8192 (0x2000)
>> Channels: 2
>> Samplerate: 48000
>> avg byte/sec: 16000
>> Block align: 512
>> bits/sample: 0
>> cbSize: 0
>> ===========================
>> list_end=0x16A
>> hdr=Software size=27
>> Software : MEncoder 1.0pre7try2-3.4.4
>> list_end=0x2AEE108E
>> Found movie at 0x100C - 0x2AEE108E
>> Reading INDEX block, 378964 chunks for 164524 frames (fpos=0x2aee1096)
>> AVI index offset: 0x1008 (movi=0x100C idx0=0x4 idx1=0x20C)
>> Auto-selected AVI audio ID = 1
>> Auto-selected AVI video ID = 0
>> AVI: Searching for audio stream (id:1)
>> AVI video size=607333376 (164524) audio size=109793280 (214440)
>> VIDEO: [DIVX] 608x342 24bpp 23.976 fps 708.0 kbps (86.4 kbyte/s)
>> [V] filefmt:3 fourcc:0x58564944 size:608x342 fps:23.98 ftime:=0.0417
>> Clip info:
>> Software: MEncoder 1.0pre7try2-3.4.4
>> get_path('sub/') -> '/home/philipp/.mplayer/sub/'
>> get_path('default.sub') -> '/home/philipp/.mplayer/default.sub'
>> ==========================================================================
>> Opening audio decoder: [liba52] AC3 decoding with liba52
>> dec_audio: Allocating 3840 bytes for input buffer.
>> dec_audio: Allocating 6144 + 65536 = 71680 bytes for output buffer.
>> Using SSE optimized IMDCT transform
>> AC3: 2.0 (stereo) 48000 Hz 128.0 kbit/s
>> A52 flags before a52_frame: 0x2A
>> A52 flags after a52_frame: 0x2
>> Using MMX optimized resampler
>> AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
>> Selected audio codec: [a52] afm:liba52 (AC3-liba52)
>> ==========================================================================
>> X11 opening display: :0.0
>> vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
>> vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local
>> display)
>> [x11] Detected wm supports NetWM.
>> [x11] Detected wm supports FULLSCREEN state.
>> [x11] Detected wm supports ABOVE state.
>> [x11] Detected wm supports BELOW state.
>> [x11] Detected wm supports STAYS_ON_TOP state.
>> [x11] Current fstype setting honours FULLSCREEN STAYS_ON_TOP ABOVE BELOW
>> X atoms
>> [xv common] Drawing colorkey manually.
>> [xv common] Using colorkey from Xv (0x0101fe).
>> ==========================================================================
>> Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
>> INFO: libavcodec init OK!
>> Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4)
>> ==========================================================================
>> Checking audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
>> [libaf] Adding filter volnorm
>> AF_pre: 48000Hz/2ch/s16le
>> ao2: 48000 Hz 2 chans s16le
>> audio_setup: using '/dev/dsp' dsp device
>> audio_setup: using '/dev/mixer' mixer device
>> audio_setup: using 'pcm' mixer device
>> audio_setup: sample format: s16le (requested: s16le)
>> audio_setup: using 2 channels (requested: 2)
>> audio_setup: using 48000 Hz samplerate (requested: 48000)
>> audio_setup: frags: 8/8 (8192 bytes/frag) free: 65536
>> AO: [oss] 48000Hz 2ch s16le (2 bps)
>> AO: Description: OSS/ioctl audio output
>> AO: Author: A'rpi
>> Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
>> Starting playback...
>> [ffmpeg] aspect_ratio: 1.777778
>> VDec: vo config request - 608 x 342 (preferred csp: Planar YV12)
>> Trying filter chain: vo
>> VDec: using Planar YV12 as output csp (no 0)
>> Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
>> VO Config (608x342->608x342,flags=0,'MPlayer',0x32315659)
>> VO: [xv] 608x342 => 608x342 Planar YV12
>> VO: Description: X11/Xv
>> VO: Author: Gerd Knorr <kraxel at goldbach.in-berlin.de> and others
>> Xvideo image format: 0x32595559 (YUY2) packed
>> Xvideo image format: 0x32315659 (YV12) planar
>> Xvideo image format: 0x59565955 (UYVY) packed
>> Xvideo image format: 0x30323449 (I420) planar
>> using Xvideo port 222 for hw scaling
>> [xv] dx: 0 dy: 0 dw: 608 dh: 364
>> *** [vo] Allocating mp_image_t, 608x352x12bpp YUV planar, 321024 bytes
>> [xv] dx: 0 dy: 0 dw: 608 dh: 364
>> *** glibc detected *** double free or corruption (!prev): 0x0874de28 ***
>>
>>
>> MPlayer interrupted by signal 6 in module: video_read_frame
>> - MPlayer crashed. This shouldn't happen.
>> It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
>> gcc version. If you think it's MPlayer's fault, please read
>> DOCS/HTML/en/bugreports.html and follow the instructions there. We
>> can't and
>> won't help unless you provide this information when reporting a
>> possible bug.
>> Uninit audio filters...
>> [libaf] Removing filter volnorm
>> Killed
>>
>> _______________________________________________
>> MPlayer-users mailing list
>> MPlayer-users at mplayerhq.hu
>> http://mplayerhq.hu/mailman/listinfo/mplayer-users
>>
>
>
More information about the MPlayer-users
mailing list