[MPlayer-users] no cdda cddb
Raena Lea-Shannon
raen at internode.on.net
Fri Nov 10 23:34:12 CET 2006
On Saturday 11 November 2006 04:41, John Brown wrote:
> Raena Lea-Shannon wrote:
> >On Friday 10 November 2006 12:19, John Brown wrote:
> > > >On Thursday 09 November 2006 02:24, John Brown wrote:
> > > > > Raena Lea-Shannon wrote:
> > > > > <snip>
> > > > >
> > > > > > > >>>>>Playing cdda://.
> > > > > > > >>>>>get_path('sub/') -> '/home/raena/.mplayer/sub/'
> > > > > > > >>>>>[file] No filename
> > > > > > > >>>>>Failed to open cdda://.
> > > > > > > >>>>
> > > > > > > >>>>You need to install cdparanoia or libcdio and rebuild
> >
> >MPlayer.
> >
> > > > > > > >>>I installed cdparanoia and checked that libcdio was there
> > > > > > > >>> and have tried compiling with
> > > > > > > >>> --with-cdparanoialibdir=/usr/lib/
> >
> >and
> >
> > > > > > > >>> still mplayer will not see the cd.
> > > > > > > >>
> > > > > > > >>Do you have the according -dev packages too? They are needed
> >
> >for
> >
> > > > > > > >>compilation.
> > > > > > > >
> > > > > > > >I did not, so I installed them and the confog.log now shows
> > > > > > > >cdparanoia OK butt will not make. Here is the make log:
> > > > > > > >.0 -lglib-2.0 -L/usr/lib -lesd -laudiofile -lm -laudio -lXt
> > > >
> > > >-lXext
> > > >
> > > > > >-lX11
> > > > > >
> > > > > > > >-lpthread
> > > > > > > >stream/stream.a(stream_cdda.o): In function
> > > >
> > > >`open_cdda':stream_cdda.c:
> > > > > > > >(.text+0x84): undefined reference to `cdio_cddap_identify'
> > > > > > > >
> > > > > > > >:stream_cdda.c:(.text+0x9c): undefined reference to
> > > > > > > >
> > > > > > > >`cdio_cddap_verbose_set'
> > > > > > > >
> > > > > > > >:stream_cdda.c:(.text+0xb0): undefined reference to
> > > > > > > >
> > > > > > > >`cdio_cddap_open'
> > > > > > > >
> > > > > > > >:stream_cdda.c:(.text+0xcc): undefined reference to
> > > > > > > >: `cdio_cddap_tracks'
> > > > >
> > > > > <etc.>
> > > > >
> > > > > > > >:stream_cdda.c:(.text+0x882): undefined reference to
> > > > > > > >: `cdio_cddap_close'
> > > > > > >
> > > > > > > The cdparanoia libraries are not being found. You can try
> > > > > > > adding them manually to EXTRA_LIB in MPlayer's config.mak and
> > > > > > > then run "make" again.
> > > > > > >
> > > > > > > I noticed from an earlier post that you are adding
> > > > > > > --with-cdparanoialibdir=/usr/lib/. Is there a particular reason
> >
> >for
> >
> > > > > > >that?
> > > > > > >
> > > > > > > It would probably be better if you let MPlayer autodetect it,
> >
> >and
> >
> > > > > > > if it iis not detected, then you make the necessary changes so
> >
> >that
> >
> > > > > > > it is found.
> > > > > > >
> > > > > > > Or you can try what works for me. I don't use cdparanoia. I am
> >
> >on
> >
> > > > > > > Windows, where it cannot be compiled (at least with
> >
> >Mingw32/MSYS).
> >
> > > > > > > However, I have
> > > > > > > enabled CD playing by installing libcdio. For now, since
> >
> >*libcdio*
> >
> > > > > > > was found automatically, "make uninstall" cdparanoia, "make
> >
> >distclean"
> >
> > > > > > > MPlayer, and configure MPlayer without any extra options
> >
> >relating
> >
> > > > > > > to cdparanoia or libcdio. It should find and use libcdio.
> > > > > >
> > > > > >I will persist with cdparanoia and working out how to compile
> >
> >mplayer
> >
> > > > > >with it. I like k3b too much to drop cdparanoiat :-)
> > > > >
> > > > > Or you can leave cdparanoia where it is, and configure MPlayer with
> > > > > --disable-cdparanoia.
> > > > >
> > > > > But you have not said why you are specifiying
> >
> >--with-cdparanioalibdir.
> >
> > > > > You should not have to. Is it detected if you configure wthout
> >
> >options?
> >
> > > > > If not, why not? Configure does not always record in the log the
> >
> >command that
> >
> > > > > it used to test for the existence of a library, or the error
> >
> >message,
> >
> > > > > so you may have to find the command in the configure script and run
> >
> >it
> >
> > > > > yourself.
> > > >
> > > >I tried compiling with --disable-cdparanoia and it still does not see
> >
> >the
> >
> > > >cd.
> > > >I tired with -cdrom-device /dev/cdrom as well
> > >
> > > I am going to concentrate on libcdio, since it is what I know.
> > >
> > > I assume that --disable-paranoia was the only configure option.
> >
> >Configure was this:
> >./configure --enable-largefiles --enable-menu
> >--with-codecsdir=/home/raena/DownloadApps/essential-20061022
> >
> > > When
> > > configure prints the list of enabled or disabled drivers and codecs,
> >
> >does
> >
> > > it say that cdda is enabled? If it does, then it must be a runtime
> >
> >problem.
> >
> >It says:
> >Checking for cdparanoia ... yes
> >Checking for libcdio ... auto (using cdparanoia)
>
> At the end, configure prints a list of the enabled or disabled drivers and
> codecs.
> My list looks like this:
> Enabled optional drivers:
> Input: ftp network tv cdda dvdread dvdnav
> Codecs: qtx xvid libavcodec ...
> Audio output: dsound win32 mpegpes(file) ...
> Video output: winvidix cvidix md5sum directx ...
> Audio filters:
> Disabled optional drivers:
> Input: vstream pvr radio tv-v4l2 tv-v4l1 live555 ...
> Codecs: x264 libdv ...
> Audio output: sun alsa ...
> Video output: xvidix bl zr ...
> Audio filters: ladspa
>
> Is cdda in the enabled or disabled list?
>
Yes
Input: ftp network tv-v4l2 tv-v4l tv cdda mpdvdkit2 vcd dvb
Then in make I get this error:
Xxf86dga -lXv -lXxf86vm -lXinerama -lXext -lX11 -lpthread
vidix/libvidix.a -L/usr/lib -ldl -lartsc -lpthread -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -L/usr/lib -lesd -laudiofile -lm -laudio -lXt -lXext -lX11 -lpthread
stream/stream.a(stream_cdda.o): In function `open_cdda':stream_cdda.c:
(.text+0x84): undefined reference to `cdio_cddap_identify'
:stream_cdda.c:(.text+0x9c): undefined reference to `cdio_cddap_verbose_set'
:stream_cdda.c:(.text+0xb0): undefined reference to `cdio_cddap_open'
:stream_cdda.c:(.text+0xcc): undefined reference to `cdio_cddap_tracks'
:stream_cdda.c:(.text+0x1a6): undefined reference to `cdio_cddap_tracks'
:stream_cdda.c:(.text+0x1dd): undefined reference to
`cdio_cddap_track_firstsector'
:stream_cdda.c:(.text+0x1f7): undefined reference to
`cdio_cddap_track_lastsector'
:stream_cdda.c:(.text+0x202): undefined reference to `cdio_paranoia_init'
:stream_cdda.c:(.text+0x24c): undefined reference to `cdio_paranoia_modeset'
:stream_cdda.c:(.text+0x260): undefined reference to
`cdio_paranoia_overlapset'
:stream_cdda.c:(.text+0x26f): undefined reference to `cdio_paranoia_seek'
:stream_cdda.c:(.text+0x331): undefined reference to `cdio_cddap_close'
:stream_cdda.c:(.text+0x369): undefined reference to `cdio_cddap_open'
:stream_cdda.c:(.text+0x381): undefined reference to
`cdio_cddap_disc_firstsector'
:stream_cdda.c:(.text+0x398): undefined reference to
`cdio_cddap_disc_lastsector'
:stream_cdda.c:(.text+0x479): undefined reference to
`cdio_cddap_track_firstsector'
:stream_cdda.c:(.text+0x49e): undefined reference to
`cdio_cddap_track_firstsector'
:stream_cdda.c:(.text+0x4ab): undefined reference to
`cdio_cddap_track_lastsector'
:stream_cdda.c:(.text+0x5c4): undefined reference to `cdio_cddap_speed_set'
:stream_cdda.c:(.text+0x627): undefined reference to `cdio_cddap_close'
stream/stream.a(stream_cdda.o): In function `fill_buffer':stream_cdda.c:
(.text+0x688): undefined reference to `cdio_paranoia_read'
stream/stream.a(stream_cdda.o): In function `seek':stream_cdda.c:
(.text+0x854): undefined reference to `cdio_paranoia_seek'
stream/stream.a(stream_cdda.o): In function `close_cdda':stream_cdda.c:
(.text+0x87a): undefined reference to `cdio_paranoia_free'
:stream_cdda.c:(.text+0x882): undefined reference to `cdio_cddap_close'
collect2: ld returned 1 exit status
make: *** [mplayer] Error 1
> > > I also assume that your -cdrom-device exists, and you have the
> > > necessary permissions.
> >
> >Yes
> >
> > > Did you compile libcdio yourself?
> >
> >No.
> >
> > > Did you specify an appropriate --prefix?
> > > For a simple life, I always install libraries in my compiler directory
> > > (c:/mingw) so that headers and libraries are naturally in the
> > > compiler's search path.
> > >
> > > Are you using shared libcdio libraries? If so, does MPlayer know where
> >
> >to
> >
> > > find them at runtime? On Windows, shared libraries have to be in your
> >
> >PATH
> >
> > > or in the same directory as the executable. Usually, "when I make
> >
> >instal"l,
> >
> > > I see output like:
> > >
> > > /bin/sh ./libtool --mode=install /bin/install -c 'libpng14.la'
> > > 'c:/mingw/lib/libpng14.la'
> > > /bin/install -c .libs/libpng14.lai c:/mingw/lib/libpng14.la
> > > /bin/install -c .libs/libpng14.a c:/mingw/lib/libpng14.a
> > > chmod 644 c:/mingw/lib/libpng14.a
> > > ranlib c:/mingw/lib/libpng14.a
> > > ----------------------------------------------------------------------
> > > Libraries have been installed in:
> > > c:/mingw/lib
> > >
> > > If you ever happen to want to link against installed libraries
> > > in a given directory, LIBDIR, you must either use libtool, and
> > > specify the full pathname of the library, or use the `-LLIBDIR'
> > > flag during linking and do at least one of the following:
> > > - add LIBDIR to the `PATH' environment variable
> > > during execution
> > > - add LIBDIR to the `LD_RUN_PATH' environment variable
> > > during linking
> > > - use the `-LLIBDIR' linker flag
> > >
> > > See any operating system documentation about shared libraries for
> > > more information, such as the ld(1) and ld.so(8) manual pages.
> > > ----------------------------------------------------------------------
> > >
> > > Does any of that apply to you?
> >
> >I don't think so. Mplayer worked fine in the old synaptic download. I am
> >not
> >really up to all that compiling info.
> >I have the 0.76-1ubuntu1 libcdio6 and libcdio-cdda0 libcdio-cdda-dev
> >libcdio -dev libcdio-paranoia0 and libcdio-paranoia-dev installed
> >
> >Maybe I should install latest libcdio from the source site?
> >
> > > My exact steps were:
> > >
> > > 1) Download libcdio-0.77 source from GNU mirror.
> > > 2) configure --enable-static --disable-shared --prefix= /mingw /* my
> > > compiler installation dir */
> > > 3) make /* the udf portion did not build on Windows, but that did not
> >
> >seem
> >
> > > to matter */
> > > 4) make install
> > > 5) Go to MPlayer source and ./configure --enable-static and whatever
> >
> >other
> >
> > > options you want. No need to mention libcdio.
> > >
> > > >I was specifying --with-cdparanioalibdir because originally when I
> > > > compiled it
> > > >did not pick up the cdda libs. Since I was advised to install the dev
> > > > files of cdparanoia that was fixed but then on compiling there was a
> >
> >make
> >
> > > > error.
> > > >
> > > >I am stumped.
> > > >
> > > >I had an old synaptic package manager version of mplayer running fine.
>
> _________________________________________________________________
> Stay in touch with old friends and meet new ones with Windows Live Spaces
> http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://sp
>aces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us
>
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> http://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
More information about the MPlayer-users
mailing list