[MPlayer-users] Makeing a video processable by an embedded system
meino.cramer at gmx.de
meino.cramer at gmx.de
Sun Aug 19 10:23:16 CEST 2012
Alexander Roalter <alex at roalter.it> [12-08-19 02:07]:
> On 08/18/2012 09:52 PM, Ron Johnson wrote:
> >On 08/18/2012 01:59 PM, Reimar Döffinger wrote:
> >>On Sat, Aug 18, 2012 at 07:30:35PM +0200, meino.cramer at gmx.de wrote:
> >
> >Would it also be useful for him to transcode the video down to 600x480
> >(which is the same aspect ratio as 720x576)?
> >
> I'm not sure if that's correct. MPEG ratio 3 (720x576) has non-square
> pixels and gets resized (with square pixels) to 768x576. So 640x480
> would be the correct aspect aspect ratio, where it could play with no
> scaling, simply adding black pillars on the side to fit it in 800x480.
>
> --
> Cheers,
> Alex
> _______________________________________________
> MPlayer-users mailing list
> MPlayer-users at mplayerhq.hu
> https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
Hi,
sorry for the delay...I did some experimenting...
Yesterday I started playing this video with XBMC on the Beaglebone, because
this application was used in some Youtube videos to demonstrate the
capabilities of the hardware of the Beaglebone.
Then I noticed the not-so-contstant playing speed ("vfps" ;) ) and
thought of mplayer to recode the the video on my PC to something
more Beaglebone-friendly.
...this morning I noticed, that mplayer itsself is installed on the
Ångström-Linux, which is used on the Beaglebone... :))
The first experiment then was to simply playback the video as it is.
It was diplayed with no stuttering with constant fps ... with the
wrong aspect ration (egg-head effect).
Then I tried
mplayer -vf scale=-3:480 <video>
and it was played with correct aspect ratio .... and heavily stuttering.
The output of
mplayer -v <video>
ON MY PC is shown below as case 1.
The output of
mplayer -v <video>
ON THE BEAGLEBONE is shown below as case 2.
Both videos were stopped manually after the first frames were displayed.
I would be very happy if there could be a way to play videos like this
one on the beaglebone preferrable by adding parameters to the call of
mplayer or by carefully recoding the videos on my PC.
Thank you very much in advance for any help!
Best regards,
mcc
=== CASE 1 ===
(THIS OUTPUT WAS GENERATED NO ADDTIONAL PARAMETERS SET!)
MPlayer SVN-r33094-4.5.3 (C) 2000-2011 MPlayer Team
CPU vendor name: AuthenticAMD max cpuid level: 6
CPU: AMD Phenom(tm) II X6 1090T Processor (Family: 16, Model: 10, Stepping: 0)
extended cpuid-level: 27
extended cache-info: 33587520
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNowExt: 1 SSE: 1 SSE2: 1 SSSE3: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowExt SSE SSE2 CMOV
get_path('codecs.conf') -> '/home/user/.mplayer/codecs.conf'
Reading /home/user/.mplayer/codecs.conf: Can't open '/home/user/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/user/.mplayer/fonts'
Configuration: --cc=x86_64-pc-linux-gnu-gcc
--host-cc=x86_64-pc-linux-gnu-gcc --prefix=/usr --bindir=/usr/bin
--libdir=/usr/lib64 --confdir=/etc/mplayer
--datadir=/usr/share/mplayer --mandir=/usr/share/man --disable-svga
--disable-svgalib_helper --disable-ass-internal --disable-arts
--disable-kai --enable-networking --disable-joystick --disable-nemesi
--disable-bl --disable-bluray --disable-ftp --disable-fribidi
--disable-libnut --disable-smb --disable-lirc --disable-lircc
--disable-apple-ir --disable-cdparanoia --disable-dvdread-internal
--disable-libdvdcss-internal --charset=UTF-8 --disable-tv-bsdbt848
--disable-ivtv --disable-tv-v4l1 --disable-pvr --disable-radio-v4l2
--disable-radio-bsdbt848 --disable-musepack
--disable-libmpeg2-internal --disable-libbs2b --disable-libgsm
--disable-librtmp --disable-libopencore_amrnb
--disable-libopencore_amrwb --disable-libmpeg2 --disable-mad
--disable-mng --disable-pnm --disable-tga --disable-xanim
--disable-libvpx-lavc --codecsdir=/usr/lib64/codecs --disable-win32dll
--disable-directfb --disable-md5sum --disable-aa --disable-fbdev
--disable-caca --disable-zr --disable-mga --disable-xmga
--disable-3dfx --disable-tdfxvid --disable-tdfxfb --disable-xvr100
--disable-esd --disable-nas --disable-openal --disable-pulse
--disable-ossaudio --disable-gui --disable-dxr3 --disable-ggi
--disable-xinerama --disable-dga1 --disable-dga2 --enable-menu
--disable-vesa --disable-vidix --disable-vidix-pcidb --enable-xvmc
--with-xvmclib=XvMCW
CommandLine: '-v' '../video.mpg'
Using nanosleep() timing
get_path('input.conf') -> '/home/user/.mplayer/input.conf'
Can't open input config file /home/user/.mplayer/input.conf: No such file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed: 92 binds
get_path('video.mpg.conf') -> '/home/user/.mplayer/video.mpg.conf'
Playing ../video.mpg.
get_path('sub/') -> '/home/user/.mplayer/sub/'
[file] File size is 3529508864 bytes
STREAM: [file] ../video.mpg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: MPEG-PS format
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename ../video.mpg ext: .mpg
Checking for Nullsoft Streaming Video
Checking for MOV
Checking for VIVO
header block 1 size: 0
Checking for PVA
Checking for MPEG-TS...
TRIED UP TO POSITION 71810, FOUND 47, packet_size= 0, SEEMS A TS? 0
Checking for LMLM4 Stream Format
Invalid packet in LMLM4 stream: ch=0 size=1140851704
LMLM4 Stream Format not found
system stream synced at 0xD (13)!
==> Found video stream: 0
==> Found audio stream: 0
MPEG-PS file format detected.
Searching for sequence header... OK!
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 3055.6 kbps (381.9 kbyte/s)
[V] filefmt:2 fourcc:0x10000002 size:720x576 fps:25.000 ftime:=0.0400
Load subtitles in ../
get_path('sub/') -> '/home/user/.mplayer/sub/'
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1920x1200 with depth 24 and 32 bpp (":0.0" => local display)
[x11] Detected wm supports NetWM.
[x11] Detected wm supports FULLSCREEN state.
[x11] Detected wm supports ABOVE state.
[x11] Detected wm supports BELOW state.
[x11] Current fstype setting honours FULLSCREEN ABOVE BELOW X atoms
Opening video filter: [screenshot]
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer II, 48000 Hz 192 kbit Stereo, BPF: 576
Channels: 2, copyright: Yes, original: Yes, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[dummy] Was reinitialized: 48000Hz/2ch/s16le
Trying every known audio driver...
alsa-init: requested format: 48000 Hz, 2 channels, 9
alsa-init: using ALSA 1.0.25
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
[AO_ALSA] alsa-lib: pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[AO_ALSA] Playback open error: Device or resource busy
Jack: JackClient::SetupDriverSync driver sem in flush mode
Jack: JackPosixSemaphore::Connect name = jack_sem.1001_default_MPlayer [10393]
Jack: JackPosixSemaphore::Connect sem_getvalue 0
Jack: Clock source : hpet
This system has no accessible HPET device (Device or resource busy)
Jack: JackLibClient::Open name = MPlayer [10393] refnum = 4
Jack: JackClient::PortRegister ref = 4 name = MPlayer [10393]:out_0 type = 32 bit float mono audio port_index = 11
Jack: JackClient::PortRegister ref = 4 name = MPlayer [10393]:out_1 type = 32 bit float mono audio port_index = 12
Jack: JackClient::Activate
Jack: JackClient::StartThread : period = 21333 computation = 100 constraint = 21333
Jack: Create non RT thread
Jack: ThreadHandler: start
Jack: JackClient::kBufferSizeCallback buffer_size = 1024
Jack: JackPosixThread::AcquireRealTimeImp priority = 5
Jack: JackClient::ClientNotify ref = 4 name = MPlayer [10393] notify = 2
Jack: JackClient::kActivateClient name = MPlayer [10393] ref = 4
Jack: JackClient::Connect src = MPlayer [10393]:out_0 dst = system:playback_1
Jack: JackClient::ClientNotify ref = 4 name = MPlayer [10393] notify = 18
Jack: JackClient::ClientNotify ref = 4 name = MPlayer [10393] notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 11
Jack: JackGraphManager::RecalculateLatency port_index = 12
Jack: JackClient::Connect src = MPlayer [10393]:out_1 dst = system:playback_2
Jack: WaitGraphChange...
Jack: JackClient::ClientNotify ref = 4 name = MPlayer [10393] notify = 18
Jack: JackClient::ClientNotify ref = 4 name = MPlayer [10393] notify = 18
Jack: JackGraphManager::RecalculateLatency port_index = 11
Jack: JackGraphManager::RecalculateLatency port_index = 12
Jack: JackGraphManager::GetTotalLatency port_index = 11 total latency = 2048
AO: [jack] 48000Hz 2ch floatle (4 bytes per sample)
AO: Description: JACK audio output
AO: Author: Reimar Döffinger <Reimar.Doeffinger at stud.uni-karlsruhe.de>
AO: Comment: based on ao_sdl.c
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/floatle...
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[libaf] Adding filter format
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[dummy] Was reinitialized: 48000Hz/2ch/s16le
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
Starting playback...
[libaf] Reallocating memory in module format, old len = 0, new len = 69637
Increasing filtered audio buffer size from 0 to 69632
[ffmpeg] aspect_ratio: 1.777778
VDec: vo config request - 720 x 576 (preferred colorspace: Planar YV12)
Trying filter chain: screenshot vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO Config (720x576->1024x576,flags=0,'MPlayer',0x32315659)
SwScaler: reducing / aligning filtersize 5 -> 4
SwScaler: reducing / aligning filtersize 5 -> 4
SwScaler: reducing / aligning filtersize 1 -> 1
SwScaler: reducing / aligning filtersize 5 -> 4
[swscaler @ 0xb6ee80]BICUBIC scaler, from yuv420p to rgb24 using MMX2
[swscaler @ 0xb6ee80]using 4-tap MMX scaler for horizontal luminance scaling
[swscaler @ 0xb6ee80]using 4-tap MMX scaler for horizontal chrominance scaling
[swscaler @ 0xb6ee80]using n-tap MMX scaler for vertical scaling (BGR)
[swscaler @ 0xb6ee80]720x576 -> 1024x576
[swscaler @ 0xb6ee80]lum srcW=720 srcH=576 dstW=1024 dstH=576 xInc=46080 yInc=65536
[swscaler @ 0xb6ee80]chr srcW=360 srcH=288 dstW=512 dstH=576 xInc=46080 yInc=32768
REQ: flags=0x437 req=0x0
VO: [gl2] 720x576 => 1024x576 Planar YV12
VO: Description: X11 (OpenGL) - multiple textures version
VO: Author: Arpad Gereoffy & Sven Goethel
[gl2] OpenGL Driver Information:
vendor: NVIDIA Corporation,
renderer GeForce GT 430/PCIe/SSE2,
version 4.2.0 NVIDIA 304.37
[gl2] You have OpenGL >= 1.2 capable drivers, GOOD (16bpp and BGR is ok!)
[gl2] Creating 1x1 textures of size 1024x1024 ...
[gl2] antialiasing off
[gl2] bilinear linear
[gl2] Using image_bpp=8, image_bytes=1,
gl_bitmap_format=GL_LUMINANCE, gl_bitmap_type=GL_UNSIGNED_BYTE,
rgb_size=0 (0,0,0), a_sz=0,
gl_internal_format=Unknown format!
[gl2] Resize: 1024x576
*** [vo] Allocating (slices) mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
*** [screenshot] Allocating (slices) mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
*** [vo] Allocating (slices) mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
*** [screenshot] Allocating (slices) mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
A: 0.3 V: 0.3 A-V: 0.025 ct: 0.000 2/ 2 ??% ??% ??,?% 0 0 [J
*** [vo] Allocating (slices) mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
*** [screenshot] Allocating (slices) mp_image_t, 720x576x12bpp YUV planar, 622080 bytes
A: 0.3 V: 0.3 A-V: 0.012 ct: 0.001 3/ 3 ??% ??% ??,?% 0 0 [JA: 0.4 V: 0.3 A-V: 0.011 ct: 0.002 4/ 4 ??% ??% ??,?% 0 0 [JA: 0.4 V: 0.4 A-V: 0.010 ct: 0.003 5/ 5 ??% ??% ??,?% 0 0 [JA: 0.4 V: 0.4 A-V: 0.021 ct: 0.005 6/ 6 ??% ??% ??,?% 0 0 [JA: 0.5 V: 0.5 A-V: 0.007 ct: 0.006 7/ 7 ??% ??% ??,?% 0 0 [JA: 0.5 V: 0.5 A-V: 0.006 ct: 0.007 8/ 8 ??% ??% ??,?% 0 0 [JA: 0.5 V: 0.5 A-V: 0.005 ct: 0.007 9/ 9 ??% ??% ??,?% 0 0 [JA: 0.6 V: 0.6 A-V: 0.017 ct: 0.009 10/ 10 ??% ??% ??,?% 0 0 [JA: 0.6 V: 0.6 A-V: 0.015 ct: 0.010 11/ 11 ??% ??% ??,?% 0 0 [JA: 0.7 V: 0.7 A-V: 0.001 ct: 0.010 12/ 12 ??% ??% ??,?% 0 0 [JA: 0.7 V: 0.7 A-V: -0.001 ct: 0.010 13/ 13 ??% ??% ??,?% 0 0 [JA: 0.8 V: 0.7 A-V: 0.013 ct: 0.012 14/ 14 17% 1% 1.0% 0 0 [JA: 0.8 V: 0.8 A-V: 0.012 ct: 0.013 15/ 15 16% 1% 1.0% 0 0 [JA: 0.8 V: 0.8 A-V: -0.001 ct: 0.013 16/ 16 16% 1% 0.9% 0 0 [JA: 0.9 V: 0.9 A-V: -0.002 ct: 0.012 17/ 17 16% 1% 0.9% 0 0 [JA: 0.9 V: 0.9 A-V: 0.011 ct: 0.013 18/ 18 16% 1% 0.9% 0 0 [J
Uninit audio filters...
[libaf] Removing filter dummy
[libaf] Removing filter format
Uninit audio: mp3lib
Uninit video: ffmpeg
Jack: jack_client_close
Jack: JackClient::Close ref = 4
Jack: JackClient::Deactivate
Jack: JackClient::Deactivate res = 0
Jack: JackPosixThread::Kill
Jack: JackSocketClientChannel::Stop
Jack: JackPosixThread::Kill
Jack: JackClientSocket::Close
Jack: JackClientSocket::Close
Jack: JackPosixSemaphore::Disconnect name = jack_sem.1001_default_MPlayer [10393]
Jack: JackLibClient::~JackLibClient
Jack: JackShmReadWritePtr1::~JackShmReadWritePtr1 4
Jack: Succeeded in unlocking 384 byte memory area
Jack: JackLibGlobals Destroy 21de560
Jack: ~JackLibGlobals
Jack: JackPosixSemaphore::Disconnect name = jack_sem.1001_default_system
Jack: JackPosixSemaphore::Disconnect name = jack_sem.1001_default_freewheel
Jack: JackPosixSemaphore::Disconnect name = jack_sem.1001_default_a2j
Jack: JackPosixSemaphore::Disconnect name = jack_sem.1001_default_qjackctl
Jack: no message buffer overruns
Jack: JackPosixThread::Stop
Jack: ThreadHandler: exit
Jack: JackShmReadWritePtr::~JackShmReadWritePtr 1
Jack: Succeeded in unlocking 1040 byte memory area
Jack: JackShmReadWritePtr::~JackShmReadWritePtr 0
Jack: Succeeded in unlocking 82246176 byte memory area
Jack: jack_client_close res = 0
vo: uninit ...
Exiting... (Quit)
=== CASE 2 ===
(THIS OUTPUT WAS GENERATED NO ADDTIONAL PARAMETERS SET!)
(THERE IS CURRENTLY NO SOUND OUTPUT AVAILBLE ON MY BEAGLEBONE!)
MPlayer2 2.0-379-ge3f5043 (C) 2000-2011 MPlayer Team
162 audio & 361 video codecs
Playing ./mnt1/video.mpg.
Detected file format: MPEG-PS format (libavformat)
[mpeg @ 0x40f59c90]max_analyze_duration reached
[lavf] stream 0: video (mpeg2video), -vid 0
[lavf] stream 1: audio (mp2), -aid 0
VIDEO: [MPG2] 720x576 0bpp 25.000 fps 2072.0 kbps (252.9 kbyte/s)
Load subtitles in ./mnt1/
Xlib: extension "XVideo" missing on display ":0.0".
[VO_XV] Sorry, Xv not supported by this X11 version/driver
[VO_XV] ******** Try with -vo x11 or -vo sdl *********
[ass] auto-open
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [libmad] libmad mpeg audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
Selected audio codec: [mad] afm: libmad (libMAD MPEG layer 1-2-3)
==========================================================================
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '0'
[AO_ALSA] alsa-lib: conf.c:4241:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:4241:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:4241:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:4720:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM default
[AO_ALSA] Playback open error: No such file or directory
Failed to initialize audio driver 'alsa'
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '0'
[AO_ALSA] alsa-lib: conf.c:4241:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:4241:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:4241:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:4720:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM default
[AO_ALSA] Playback open error: No such file or directory
[AO SDL] Samplerate: 48000Hz Channels: Stereo Format s16le
[AO SDL] Unable to open audio: No available audio device
DVB card number must be between 1 and 4
AO: [null] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [x11] 720x576 => 1024x576 Planar YV12
[swscaler @ 0x40f8b390]No accelerated colorspace conversion found from yuv420p to rgb565le.
[swscaler @ 0x40f8b390]using unscaled yuv420p -> rgb565le special converter
A: 0.3 V: 0.0 A-V: 0.000 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.3 V: 0.3 A-V: 0.053 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.4 V: 0.3 A-V: 0.052 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.4 V: 0.3 A-V: 0.049 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.4 V: 0.4 A-V: 0.044 ct: 0.001 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.5 V: 0.4 A-V: 0.041 ct: 0.001 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.5 V: 0.5 A-V: 0.037 ct: 0.001 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.5 V: 0.5 A-V: 0.030 ct: 0.001 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.6 V: 0.5 A-V: 0.031 ct: 0.002 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.6 V: 0.6 A-V: 0.043 ct: 0.003 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.7 V: 0.6 A-V: 0.033 ct: 0.004 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.7 V: 0.7 A-V: 0.027 ct: 0.004 0/ 0 ??% ??% ??,?% 0 0 [KA: 0.7 V: 0.7 A-V: 0.019 ct: 0.003 0/ 0 ??% ??% ??,?% 0 0 [K
Decreasing video pts: 0.664656 < 0.704656
Exiting... (Quit)
More information about the MPlayer-users
mailing list