[MPlayer-users] Mplayer : Without Using X: Crashing in set_fullmode
Rashmi.Nivarthy at emc.com
Rashmi.Nivarthy at emc.com
Mon Jun 25 03:38:53 CEST 2012
Dear Team,
Our intension is to make mplayer run without X-libraries .
We have compiled Mplayer from the source version :
Mplayer-1.0rc3final.dfsg1 for debain version 5.0.8.
We have SDL library :libSDL-1.2
FreeDb version: directfb-1.2-9-pure
We have compiled the sources using above library versions/
When we ran mplayer , the application is crashing.
Below is the crash report:
mplayer -vo sdl /mnt/pools/A/A0/Movies/video1.avi
mplayer: /mnt/apps/lib/libjpeg.so.62: no version information available
(required by mplayer)
Warning unknown option stop-xscreensaver at line 88
MPlayer 1.0rc3-4.4.5 (C) 2000-2009 MPlayer Team
Playing /mnt/pools/A/A0/Movies/video1.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
Detected NON-INTERLEAVED AVI file format.
VIDEO: [cvid] 320x240 24bpp 15.000 fps 1236.7 kbps (151.0 kbyte/s)
commandline read: mplayer
commandline read: -vo
commandline read: sdl
commandline read: /mnt/pools/A/A0/Movies/video1.avi
~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.10++
|~~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2007-2009 Intel Corporation
(c) 2001-2008 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2011-06-09 00:06)
(*) IntelCE/Systems: Available GDL driver memory: 65MB of 70MB
(*) Direct/Thread: Started 'Hotplug with Linux Input' (11172) [INPUT
OTHER/OTHER 0/0] <8388608>...
(*) DirectFB/Input: Hotplug detecting enabled with Linux Input Driver
(*) Direct/Thread: Started 'Linux Input' (11173) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: Philips RCMM Remote Control (1) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (11174) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: Philips RCMM Mouse (2) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (11175) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: Philips RCMM keyboard for jv4 (3) 0.1 (directfb.org)
(*) Direct/Thread: Started 'Linux Input' (11176) [INPUT OTHER/OTHER 0/0]
<8388608>...
(*) DirectFB/Input: Reboot Control (4) 0.1 (directfb.org)
(*) DirectFB/Genefx: MMX detected and enabled
(*) IntelCE/GfxDriver: Using OpenGL ES 1.1 graphics library
(*) IntelCE/GfxDriver: Using SRB graphics library
(*) DirectFB/Graphics: Intel Corporation Intel_CE Graphics Driver 2.0
(Intel Corporation)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
[VO_SDL] Using driver: directf.
========================================================================
==
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffcvid] vfm: ffmpeg (FFmpeg Cinepak Video)
========================================================================
==
========================================================================
==
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 22050 Hz, 1 ch, u8, 176.4 kbit/100.00% (ratio: 22050->22050)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
========================================================================
==
[AO SDL] Samplerate: 22050Hz Channels: Mono Format u8
[AO SDL] using esd audio driver.
[AO SDL] Unable to open audio: No available audio device
Failed to initialize audio driver 'sdl:esd'
Could not open/initialize audio device -> no sound.
Audio: no sound
Starting playback...
VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [sdl] 320x240 => 320x240 Planar YV12
(!) [11167: 0.000] --> Caught signal 11 (at 0x6, invalid address) <--
(!!!) *** WARNING [still 1 objects in pool:'Layer Region Pool'] ***
[object.c:359 in fusion_object_pool_destroy()]
(!!!) *** WARNING [still 1 objects in pool:'Layer Context Pool'] ***
[object.c:359 in fusion_object_pool_destroy()]
MPlayer interrupted by signal 6 in module: decode_video
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We
can't and
won't help unless you provide this information when reporting a
possible bug.
[ This binary of MPlayer in Debian is currently compiled with
'--enable-debug'; the debugging symbols are in the package
'mplayer-dbg'.]
GDB Crassh Dump:
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
[VO_SDL] Using driver: directf.
========================================================================
==
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffcvid] vfm: ffmpeg (FFmpeg Cinepak Video)
========================================================================
==
========================================================================
==
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 22050 Hz, 1 ch, u8, 176.4 kbit/100.00% (ratio: 22050->22050)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
========================================================================
==
[AO SDL] Samplerate: 22050Hz Channels: Mono Format u8
[AO SDL] using esd audio driver.
[AO SDL] Unable to open audio: No available audio device
Failed to initialize audio driver 'sdl:esd'
Could not open/initialize audio device -> no sound.
Audio: no sound
Starting playback...
VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [sdl] 320x240 => 320x240 Planar YV12
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb6b026d0 (LWP 11292)]
0x080c2da3 in set_fullmode (mode=-2) at libvo/vo_sdl.c:637
637 libvo/vo_sdl.c: No such file or directory.
in libvo/vo_sdl.c
(gdb) bt
#0 0x080c2da3 in set_fullmode (mode=-2) at libvo/vo_sdl.c:637
#1 0x080c45c0 in config (width=320, height=240, d_width=320,
d_height=240,
flags=<value optimized out>, title=0x85cb97a "MPlayer",
format=842094169)
at libvo/vo_sdl.c:843
#2 0x080b4b29 in config_video_out (vo=0x85cf6e0, width=320, height=240,
d_width=320, d_height=240, flags=0, title=0x85cb97a "MPlayer",
format=842094169) at libvo/video_out.c:352
#3 0x08142a13 in config (vf=0x8bc1538, width=320, height=240,
d_width=320,
d_height=240, flags=0, outfmt=842094169) at libmpcodecs/vf_vo.c:67
#4 0x08119ec3 in vf_config_wrapper (vf=0x8bc1538, width=0, height=1,
d_width=320, d_height=240, flags=0, outfmt=842094169)
at libmpcodecs/vf.c:643
#5 0x08118065 in mpcodecs_config_vo (sh=0x8b99c10, w=320, h=240,
preferred_outfmt=842094169) at libmpcodecs/vd.c:310
#6 0x081eb1c8 in init_vo (sh=0x8b99c10, pix_fmt=<value optimized out>)
at libmpcodecs/vd_ffmpeg.c:521
#7 0x081eba35 in get_buffer (avctx=0x8bc1860, pic=0x8bc1bd4)
at libmpcodecs/vd_ffmpeg.c:569
#8 0x08333ede in cinepak_decode_frame (avctx=0x8bc1860, data=0x8bc1780,
data_size=0xbff829fc, buf=0x8b9be98 "", buf_size=22960) at
cinepak.c:424
#9 0x082f7a5c in avcodec_decode_video (avctx=0x8bc1860,
picture=0x8bc1780,
got_picture_ptr=0xbff829fc, buf=0x8b9be98 "", buf_size=22960)
at utils.c:542
---Type <return> to continue, or q <return> to quit---
#10 0x081eb35c in decode (sh=0x8b99c10, data=0x8b9be98, len=22960,
flags=<value optimized out>) at libmpcodecs/vd_ffmpeg.c:781
#11 0x08112a57 in decode_video (sh_video=0x8b99c10, start=0x8b9be98 "",
in_size=22960, drop_frame=0, pts=0) at libmpcodecs/dec_video.c:369
#12 0x080a48c3 in main (argc=5, argv=0xbff83bc4) at mplayer.c:2291
Please let us if we are doing something wrong , in the way we need use
mplayer.
We need your help in fixing this issue.
Thanks,
Rashmi
_______________________________________________
MPlayer-users mailing list
MPlayer-users at mplayerhq.hu
https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
More information about the MPlayer-users
mailing list