[MPlayer-users] Crash with -ao jack when channel layout changes in a broadcast aac/latm stream when resample needed.

[Andy Furniss]

Carl Eugen Hoyos wrote:

> (You could have linked to the FFmpeg sample...)

Slightly confused, do you mean there is a test case on samples.ffmpeg.org?

>
>> With alsa on my stereo setup, sound is still lost by default
>
> Still?
>
> The reason I ask is that this is a regression, it used to work fine
> here.

Output below and can you remember roughly when (since March when you
confirmed it didn't work for you) it was fixed - I must have missed it
(though that's probably because I don't watch much TV and may have left
my workaround in place).

I also notice a change since my previous report in that before it
bailed/quit but now I have to <ctrl><c>.

ph4[mplayer]$ ./mplayer -v -ao alsa ~/2chto51.latm
MPlayer SVN-r36541-4.6.3 (C) 2000-2013 MPlayer Team
CPU vendor name: AuthenticAMD  max cpuid level: 5
CPU: AMD Phenom(tm) II X4 965 Processor (Family: 16, Model: 4, Stepping: 3)
extended cpuid-level: 27
extended cache-info: 33587520
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNowExt: 1 SSE: 1 SSE2: 1 SSE3: 1 
SSSE3: 0 SSE4: 0 SSE4.2: 0 AVX: 0
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowExt SSE SSE2 
SSE3 CMOV
get_path('codecs.conf') -> '/home/andy/.mplayer/codecs.conf'
Reading optional codecs config file /home/andy/.mplayer/codecs.conf: No 
such file or directory
Reading optional codecs config file /usr/etc/mplayer/codecs.conf: No 
such file or directory
Using built-in default codecs.conf.
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/andy/.mplayer/fonts'
Configuration: --prefix=/usr --enable-xvmc --enable-debug
CommandLine: '-v' '-ao' 'alsa' '/home/andy/2chto51.latm'
Using nanosleep() timing
get_path('input.conf') -> '/home/andy/.mplayer/input.conf'
Reading optional input config file /home/andy/.mplayer/input.conf: No 
such file or directory
Reading optional input config file /usr/etc/mplayer/input.conf: No such 
file or directory
Falling back on default (hardcoded) input config
get_path('2chto51.latm.conf') -> '/home/andy/.mplayer/2chto51.latm.conf'

Playing /home/andy/2chto51.latm.
get_path('sub/') -> '/home/andy/.mplayer/sub/'
[file] File size is 198044 bytes
STREAM: [file] /home/andy/2chto51.latm
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
libavformat version 55.22.100 (internal)
Configuration: --enable-gpl --enable-postproc
LAVF_check: LOAS AudioSyncStream
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename /home/andy/2chto51.latm ext: .latm
Checking for Nullsoft Streaming Video
Checking for MOV
Checking for VIVO
Checking for PVA
Checking for MPEG-TS...
TRIED UP TO POSITION 68317, FOUND 47, packet_size= 0, SEEMS A TS? 0
Checking for LMLM4 Stream Format
Invalid packet in LMLM4 stream: ch=22241 size=1150981
LMLM4 Stream Format not found
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG packet stats: p100: 0  p101: 0 p1B6: 0 p12x: 0 sli: 0 a: 0 b: 0 c: 
0 idr: 0 sps: 0 pps: 1 PES: 3  MP3: 363, synced: 0
Not MPEG System Stream format... (maybe Transport Stream?)
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG packet stats: p100: 0  p101: 0 p1B6: 0 p12x: 0 sli: 0 a: 0 b: 0 c: 
0 idr: 0 sps: 0 pps: 1 PES: 3  MP3: 363, synced: 0
Not MPEG System Stream format... (maybe Transport Stream?)
==> Found video stream: 0
ds_fill_buffer: EOF reached (stream: video)
LAVF_check: LOAS AudioSyncStream
libavformat file format detected.
[loas @ 0x7f8e682cbba0]Before avformat_find_stream_info() pos: 0 bytes 
read:32768 seeks:0
[aac_latm @ 0x7f8e682d9d60]initializing latmctx
[loas @ 0x7f8e682cbba0]max_analyze_duration 5000000 reached at 5013333 
microseconds
[loas @ 0x7f8e682cbba0]After avformat_find_stream_info() pos: 157696 
bytes read:163840 seeks:0 frames:237
==> Found audio stream: 0
======= WAVE Format =======
Format Tag: 20557 (0x504D)
Channels: 2
Samplerate: 48000
avg byte/sec: 0
Block align: 1
bits/sample: 0
cbSize: 2
Unknown extra header dump: [11] [90]
==========================================================================
[lavf] stream 0: audio (aac_latm), -aid 0
LAVF: 1 audio and 0 video streams found
LAVF: build 3610212
Load subtitles in /home/andy/
get_path('sub/') -> '/home/andy/.mplayer/sub/'
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
dec_audio: Allocating 1536000 + 131072 = 1667072 bytes for output buffer.
FFmpeg's libavcodec audio codec
libavcodec version 55.45.100 (internal)
Configuration: --enable-gpl --enable-postproc
INFO: libavcodec "aac_latm" init OK!
AUDIO: 48000 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->384000)
Selected audio codec: [fflatm] afm: ffmpeg (FFmpeg AAC in LATM)
==========================================================================
Building audio filter chain for 48000Hz/2ch/floatle -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 48000Hz/2ch/floatle
[dummy] Was reinitialized: 48000Hz/2ch/floatle
Trying preferred audio driver 'alsa', options '[none]'
alsa-init: requested format: 48000 Hz, 2 channels, 1d
alsa-init: using ALSA 1.0.26
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: opening device in blocking mode
alsa-init: device reopened in blocking mode
[AO_ALSA] Format floatle is not supported by hardware, trying default.
alsa-init: got buffersize=96000
alsa-init: got period size 1416
alsa: 48000 Hz/2 channels/4 bpf/96000 bytes buffer/Signed 16 bit Little 
Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <joy at streamminister.de>
AO: Comment: under development
Building audio filter chain for 48000Hz/2ch/floatle -> 48000Hz/2ch/s16le...
[dummy] Was reinitialized: 48000Hz/2ch/floatle
[libaf] Adding filter format
[format] Changing sample format from little-endian 32-bit float to 
little-endian 16-bit signed int
[format] Accelerated little-endian 32-bit float to little-endian 16-bit 
signed int conversion
[dummy] Was reinitialized: 48000Hz/2ch/floatle
[format] Changing sample format from little-endian 32-bit float to 
little-endian 16-bit signed int
[format] Accelerated little-endian 32-bit float to little-endian 16-bit 
signed int conversion
Video: no video
Freeing 0 unused video chunks.
Starting playback...
[libaf] Reallocating memory in module format, old len = 0, new len = 65545
Increasing filtered audio buffer size from 0 to 65536
Increasing filtered audio buffer size from 65536 to 98048
A:   1.4 (01.3) of 0.0 (unknown)  0.6%
[aac_latm @ 0x7f8e682d9d60]audio config changed
alsa-uninit: pcm closed
Building audio filter chain for 48000Hz/6ch/floatle -> 0Hz/0ch/??...
[dummy] Was reinitialized: 48000Hz/6ch/floatle
[format] Changing sample format from little-endian 32-bit float to 
little-endian 16-bit signed int
[format] Accelerated little-endian 32-bit float to little-endian 16-bit 
signed int conversion
[dummy] Was reinitialized: 48000Hz/6ch/floatle
[format] Changing sample format from little-endian 32-bit float to 
little-endian 16-bit signed int
[format] Accelerated little-endian 32-bit float to little-endian 16-bit 
signed int conversion
Trying preferred audio driver 'alsa', options '[none]'
alsa-init: requested format: 48000 Hz, 6 channels, 9
alsa-init: using ALSA 1.0.26
alsa-init: device set to surround51
alsa-init: using device surround51
alsa-init: opening device in blocking mode
alsa-init: device reopened in blocking mode
[AO_ALSA] Unable to get initial parameters: Invalid argument
Failed to initialize audio driver 'alsa'
Could not open/initialize audio device -> no sound.
Uninit audio filters...
[libaf] Removing filter dummy
[libaf] Removing filter format
Uninit audio: ffmpeg



MPlayer interrupted by signal 2 in module: key_events
vo: x11 uninit called but X11 not initialized..

Exiting... (Quit)