[MPlayer-users] Software scaling is COOL!

[Felix Buenemann]

On Sunday 14 April 2002 19:15, Arpi wrote:
> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> Hi,
>
> > > Cu-Mine at 933MHz in Abit BX6 2.0.
> >
> > It's 133 MHz BSB, and no good socket-to-slot adapter seem to be capable
> > of handling such a high frequency. Or maybe it's motherboard (Abit
> > BE-6) itself? Processor adapter is from Asus, other nonames I've tried
>
> it's the fcpga-slot1 converter. i had the same problem (with abit be6-2
> and p3-666), it ran at 125mhz but didn't at 133. btw, note, that after
> replacing teh slot1 adapter with a better one, it worked at 133mhz...
> for ~ 4 months, then the motherboard burned :(
> so i don't recommend running old abit boards at 133mhz.
> abit bx-133 is ok, but the be6 series is too old for that
>
Abit BX6 2.0 is even older =) but I use PIII 750 for Slot 1 no slot-adapter, I 
could get it to 1GHz if I got the voltage-hack of the bios working again. 
However at 933MHz, 124MHz FSB it's rock stable now.

>
> A'rpi / Astral & ESP-team

-- 
Best Regards,
        Atmos
____________________________________________
- MPlayer Developer - http://mplayerhq.hu/ -
____________________________________________