[MPlayer-users] vcd causes mplayer endless loop

[Steven M. Schultz]

Hi -

> From: Arpi <arpi at thot.banki.hu>
> and it is not my day for usable bugreports...

	Hate it when that happens ;)

> > 	Has anyone else tried today's CVS build with a VCD?
> 
> not, but were no such changes
> you have a bad day, so bad so you forget to RTFM

	It has worked before so I was surprised tonight (so surprised I did
	not follow the complete/full bug reporting form).   Actually I was
	just casually asking if anyone has tried a VCD/SVCD recently.

	The "-v" output is:

mplayer -v -vcd 1 -cdrom-device /dev/rsr1c

MPlayer CVS-020318-22:40-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Type: 6, Stepping: 1)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled with RUNTIME CPU Detection - warning, it's untested!
Reading /users/sms/.mplayer/codecs.conf: can't open '/users/sms/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 30 audio & 80 video codecs
CommandLine: '-v' '-vcd' '1' '-cdrom-device' '/dev/rsr1c'
get_path('font/font.desc') -> '/users/sms/.mplayer/font/font.desc'
font: can't open file: /users/sms/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using usleep() timing
get_path('input.conf') -> '/users/sms/.mplayer/input.conf'
Parsing input config file /users/sms/.mplayer/input.conf
Input config file /users/sms/.mplayer/input.conf parsed : 50 binds
Playing VCD track 1
track 01:  adr=1  ctrl=6  format=2  00:02:00  mode: 1
track 02:  adr=1  ctrl=6  format=2  00:08:00  mode: 1
VCD start byte position: 0x551B8  end: 0x1546E0
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for NuppelVideo
Checking for MOV

	After that the program goes into an endless loop.

	On another system with an older MPlayer (from Feb 18) it works fine
	(gets past the "Checking for MOV" step).

	Ah, time to hit the bed - hope this is a better bug report.

	Steven

mplayer -v -vcd 2 -cdrom-device /dev/rsr0c

MPlayer CVS-020218-16:25-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Type: 6, Stepping: 3)
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 0 SSE2: 0
Compiled for x86 CPU with features: MMX MMX2
Reading /usr/home/sms/.mplayer/codecs.conf: can't open '/usr/home/sms/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 29 audio & 79 video codecs
CommandLine: '-v' '-vcd' '2' '-cdrom-device' '/dev/rsr0c'
get_path('font/font.desc') -> '/usr/home/sms/.mplayer/font/font.desc'
font: can't open file: /usr/home/sms/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using usleep() timing
Playing VCD track 2
track 01:  adr=1  ctrl=6  format=2  00:02:00  mode: 1
track 02:  adr=1  ctrl=6  format=2  00:08:00  mode: 1
VCD start byte position: 0x1546E0  end: 0x670C76C
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for NuppelVideo
Checking for MOV
Checking for VIVO
header block 1 size: 0
Checking for REAL
stream_seek: WARNING! Can't seek to 0x4 !
system stream synced at 0x165745 (0)!
==> Found video stream: 0
Detected MPEG-PS file format!
==> Found audio stream: 0
Searching for sequence header... OK!
VIDEO:  MPEG2  480x480  (aspect 2)  29.97 fps  3125.0 kbps (390.6 kbyte/s)
[V] filefmt:2  fourcc:0x10000002  size:480x480  fps:29.97  ftime:=0.0334
get_path('sub/') -> '/usr/home/sms/.mplayer/sub/'
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Initializing audio codec...
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
CPU vendor name: GenuineIntel  max cpuid level: 2
CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville (Type: 6, Stepping: 3)
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using MMX optimized decore!
MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: srate=44100  chans=2  bps=2  sfmt=0x10  ratio: 28000->176400
Detected video codec: [mpeg12] drv:1 prio:0 (MPEG 1 or 2)
mpeg2dec-0.2.0-release (C) 2000-2001 Aaron Holtzman & Michel Lespinasse
libmpeg2: Using MMXEXT for IDCT transform
libmpeg2: Using MMXEXT for motion compensation
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 480x480 => 640x480 Planar YV12 
VO: Description: X11/Xv
VO: Author: Gerd Knorr <kraxel at goldbach.in-berlin.de>
video_out->init(480x480->640x480,flags=0,'MPlayer',0x32315659)
vo: X11 color mask:  FFFF  (R:F800 G:7E0 B:1F)
vo: X11 running at 1024x768 with depth 16 and 16 bits/pixel (":0.0" => local display)
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x30323449 (I420) planar
Xvideo image format: 0x36315652 (RV16) packed
Xvideo image format: 0x35315652 (RV15) packed
Xvideo image format: 0x31313259 (Y211) packed
Xvideo image format: 0x0 (    ) packed
using Xvideo port 43 for hw scaling
[xv] dcx: 0 dcy: 0 dx: 0 dy: 0 dw: 640 dh: 480
INFO: Video OUT driver init OK!
AO: [oss] 44100Hz Stereo Signed 16-bit (Little-Endian)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
ao2: 44100 Hz  2 chans  Signed 16-bit (Little-Endian)
audio_setup: using '/dev/dsp' dsp device
audio_setup: sample format: Signed 16-bit (Little-Endian) (requested: Signed 16-bit (Little-Endian))
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags:  16/16  (4096 bytes/frag)  free:  65536
Start playing...
user_data: len= 14  10 0E 00 80 ''
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
[xv] dcx: 94 dcy: 170 dx: 0 dy: 0 dw: 640 dh: 480