[MPlayer-users] mencoder problem- just sits at step

Jason Hollinden jhollind at hollindenfamily.org
Fri Jan 31 16:43:57 CET 2003


I noticed this as well with rc3 (and rc2 I believe), and the CVS
snapshot from the 24th.  If you ctrl-c out, it gives an error to the effect 
IIRC of not being able to uninit_font.

I had backed down to rc1 for what I was doing at that time, and forgot all 
about it myself.

Thanks...

On Fri, 31 Jan 2003, Steven Adeff wrote:

> [Automatic answer: RTFM (read DOCS, FAQ), also read DOCS/bugreports.html]
> I'm trying to convert a tivo recording to VCD using mencoder. It gets to a 
> certain step and just sits there like its not doing anything but mplayer is 
> using around 98% of my cpu doing it. Its been sitting like this for the last 
> day or so. Anyone know what I'm doing wrong?
> 
> thanks!
> 
> here's the output:
> 
> [adeffs at indierocksteve Tivo]$ mencvcd Grass-vcd Grass.mpg -vnorm n -vfr 1 
> -svcdout
> which: no toolame in
> (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/local/kde/bin)
> WARNING: toolame is not found in your path
> /sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/local/kde/bin!
> which: no normalize in
> (/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/local/kde/bin)
> WARNING: normalize is not found in your path
> /sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/local/kde/bin!
> mplayer -noframedrop -vo yuv4mpeg -ao pcm -waveheader -v -osdlevel 0   
> Grass.mpg
> Using GNU internationalization
> Original domain: messages
> Original dirname: /usr/share/locale
> Current domain: mplayer
> Current dirname: /usr/local/share/locale
> 
> 
> MPlayer CVS-030118-00:00-3.2 (C) 2000-2003 Arpad Gereoffy (see DOCS)
> 
> CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP 
> Multiprocessor/Athlon XP eXtreme
> Performance (Family: 6, Stepping: 2)
> Detected cache-line size is 64 bytes
> CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE
> 
> Reading config file /usr/local/etc/mplayer/mplayer.conf: No such file or 
> directory
> Reading config file /home/adeffs/.mplayer/config
> MPlayer was compiled WITHOUT GUI support.
> Reading /home/adeffs/.mplayer/codecs.conf: can't open 
> '/home/adeffs/.mplayer/codecs.conf': No such
> file or directory
> Reading /usr/local/etc/mplayer/codecs.conf: 49 audio & 130 video codecs
> CommandLine: '-noframedrop' '-vo' 'yuv4mpeg' '-ao' 'pcm' '-waveheader' '-v' 
> '-osdlevel' '0'
> 'Grass.mpg'
> get_path('font/font.desc') -> '/home/adeffs/.mplayer/font/font.desc'
> font: can't open  /home/adeffs/.mplayer/font/font.desc
> Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
> Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
> Failed to open /dev/rtc: Permission denied (mplayer should be setuid root or 
> /dev/rtc should be
> readable by the user.)
> Using usleep() timing
> get_path('input.conf') -> '/home/adeffs/.mplayer/input.conf'
> Can't open input config file /home/adeffs/.mplayer/input.conf : No such file 
> or directory
> Can't open input config file /usr/local/etc/mplayer/input.conf : No such file 
> or directory
> Falling back on default (hardcoded) input config
> get_path('Grass.mpg.conf') -> '/home/adeffs/.mplayer/Grass.mpg.conf'
> 
> Playing Grass.mpg
> Not an URL!
> File size is 4114614272 bytes
> Checking for YUV4MPEG2
> DEMUXER: freeing demuxer at 0x8451910
> ASF_check: not ASF guid!
> DEMUXER: freeing demuxer at 0x8451910
> Checking for NuppelVideo
> DEMUXER: freeing demuxer at 0x8451910
> Checking for MOV
> DEMUXER: freeing demuxer at 0x8451910
> Checking for VIVO
> header block 1 size: 0
> DEMUXER: freeing demuxer at 0x8451910
> Checking for REAL
> DEMUXER: freeing demuxer at 0x8451910
> DEMUXER: freeing demuxer at 0x8451910
> DEMUXER: freeing demuxer at 0x8451910
> DEMUXER: freeing demuxer at 0x8451910
> DEMUXER: freeing demuxer at 0x8451910
> Checking for SMJPEG
> DEMUXER: freeing demuxer at 0x8451910
> DEMUXER: freeing demuxer at 0x8452178
> Checking for PVA
> DEMUXER: freeing demuxer at 0x8452178
> system stream synced at 0xD (0)!
> ==> Found audio stream: 0
> ==> Found video stream: 0
> MPEG-PS file format detected.
> Searching for sequence header... OK!
> VIDEO:  MPEG2  720x480  (aspect 2)  29.97 fps  7250.0 kbps (906.2 kbyte/s)
> [V] filefmt:2  fourcc:0x10000002  size:720x480  fps:29.97  ftime:=0.0334
> get_path('sub/') -> '/home/adeffs/.mplayer/sub/'
> ==========================================================================
> Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
> dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer
> mp3lib: made decode tables with MMX optimization
> mp3lib: using 3DNow!Ex optimized decore!
> MP3lib: init layer2&3 finished, tables done
> MPEG 1.0, Layer II, 32000 Hz 192 kbit Stereo, BPF: 864
> Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
> AUDIO: 32000 Hz, 2 ch, 16 bit (0x10), ratio: 24000->128000 (192.0 kbit)
> Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
> ==========================================================================
> vo_yuv4mpeg: Using (default) progressive frame mode
> ==========================================================================
> Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
> VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES)
> Could not find matching colorspace - retrying with -vop scale...
> Opening video filter: [scale]
> SwScale params: -1 x -1 (-1=no scaling)
> The selected video_out device is incompatible with this codec.
> VDecoder init failed :(
> Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder v2.0
> libmpeg2: Using MMXEXT for IDCT transform
> libmpeg2: Using MMXEXT for motion compensation
> VDec: vo config request - 720 x 480 (preferred csp: Planar YV12)
> VDec: using Planar YV12 as output csp (no 0)
> Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
> VO Config (720x480->720x540,flags=0,'MPlayer',0x32315659)
> VO: [yuv4mpeg] 720x480 => 720x540 Planar YV12
> VO: Description: yuv4mpeg output for mjpegtools (to "stream.yuv")
> VO: Author: Robert Kesterson <robertk at robertk.com>
> Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
> ==========================================================================
> PCM: File: audiodump.wav (WAVE)
> PCM: Samplerate: 32000Hz Channels: Stereo Format Signed 16-bit (Little-Endian)
> PCM: Info: fastest dumping is achieved with -vc null -vo null
> PCM: Info: to write WAVE files use -waveheader (default); for RAW PCM 
> -nowaveheader.
> AO: [pcm] 32000Hz 2ch Signed 16-bit (Little-Endian)
> AO: Description: RAW PCM/WAVE file writer audio output
> AO: Author: Atmosfear
> Building audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
> [libaf] Adding filter dummy
> [dummy] Was reinitialized, rate=32000Hz, nch = 2, format = 0x00000001 and bps 
> = 2
> [dummy] Was reinitialized, rate=32000Hz, nch = 2, format = 0x00000001 and bps 
> = 2
> Starting playback...
>    INFO: [yuvscaler] yuvscaler (version 1.6.1) is a general scaling utility 
> for yuv frames
>    INFO: [yuvscaler] (C) 2001 Xavier Biquard <xbiquard at free.fr>
>    INFO: [yuvscaler] yuvscaler -h for help, or man yuvscaler
> ++ WARN: [mpeg2enc] No aspect ratio specifed and no guess possible: assuming 
> 4:3 display aspect!
> ++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by 
> "vcdimager"
> ++ WARN: [mpeg2enc] If you're not using vcdimager you may wish to turn this 
> off using -d
> *** [vo] Allocating mp_image_t, 720x480x12bpp YUV planar, 518400 bytes
> *** [vo] Allocating mp_image_t, 720x480x12bpp YUV planar, 518400 bytes%
> *** [vo] Allocating mp_image_t, 720x480x12bpp YUV planar, 518400 bytes%
> MPEG Stream reached EOF-0.234 ct:  0.211  161818/161818  21% 2652%  4.2% 92962 
> 0 0%0%
> ds_fill_buffer: EOF reached (stream: audio)
> MPEG Stream reached EOF-0.181 ct:  0.205  161820/161820  21% 2652%  4.2% 92962 
> 0 0%
> ds_fill_buffer: EOF reached (stream: video)
> MPEG Stream reached EOF
> ds_fill_buffer: EOF reached (stream: video)
> MPEG Stream reached EOF
> ds_fill_buffer: EOF reached (stream: video)
> MPEG Stream reached EOF
> ds_fill_buffer: EOF reached (stream: video)
> MPEG Stream reached EOF
> ds_fill_buffer: EOF reached (stream: video)
> MPEG Stream reached EOF
> ds_fill_buffer: EOF reached (stream: video)
> EOF code: 1  99.6 A-V: -0.181 ct:  0.201  161820/161820  21% 2652%  4.2% 92962 
> 0 0%
> 
> Uninit audio filters...
> [libaf] Removing filter dummy
> uninit audio: mp3lib
> uninit video: libmpeg2
> DEMUXER: freeing demuxer at 0x8452178
> DEMUXER: freeing sh_audio at 0x844fd30
> DEMUXER: freeing sh_video at 0x844fdd8
> 
> 
> -- 
> 
> Steven Adeff
> ADEFFS at RPI.EDU
> Graduate, Electric Power Engineering
> Rensselaer Polytechnic Institute - Troy, NY
> 
> _______________________________________________
> RTFM!!!  http://www.MPlayerHQ.hu/DOCS
> Search:  http://www.MPlayerHQ.hu/cgi-bin/htsearch
> http://mplayerhq.hu/mailman/listinfo/mplayer-users
> 


--

Jason

   Our Cabbage Who Art in D.C.

   In biology -- and the economy -- simple rules produce complex behaviors.
   That's "simple" rules.

   The Lord's Prayer is 66 words, the Gettysburg Address is 286 words,
   there are 1,322 words in the Declaration of Independence, but government
   regulations on the sale of cabbage total 26,911 words.

   That's "cabbage." Cole slaw, we presume, is more complicated.

   Source: National Review (10/24/94)



More information about the MPlayer-users mailing list