[MPlayer-users] Mplayer is faulting.

[Reshat Sabiq]

Looks like you have a similar problem to mine. But i get Seg Fault when 
doing -vo x11. With -vo xv, i get No XVideo support kinda message.
I have a RAM shortage (24MB), but i don't think that's an issue. It 
should be able to play at least something with -framedrop.

-- 
Sincerely,
Reshat.
---
If you see my certificate with this message, you should be able to send me encrypted e-mail. 
Please consult your e-mail client for details if you would like to do that.



BlkPoohba wrote:

># gdb mplayer
>GNU gdb Red Hat Linux (5.3.90-0.20030710.41rh)
>Copyright 2003 Free Software Foundation, Inc.
>GDB is free software, covered by the GNU General Public License, and you
>are
>welcome to change it and/or distribute copies of it under certain
>conditions.
>Type "show copying" to see the conditions.
>There is absolutely no warranty for GDB.  Type "show warranty" for
>details.
>This GDB was configured as "i386-redhat-linux-gnu"...
>(no debugging symbols found)...Using host libthread_db library
>"/lib/tls/libthread_db.so.1".
>
>(gdb) run outtakes.mpg
>Starting program: /usr/bin/mplayer outtakes.mpg
>(no debugging symbols found)...(no debugging symbols found)...
>(no debugging symbols found)...(no debugging symbols found)...
>(no debugging symbols found)...(no debugging symbols found)...
>(no debugging symbols found)...[Thread debugging using libthread_db
>enabled]
>[New Thread -1085247360 (LWP 5748)]
>MPlayer dev-CVS--3.3.2 (C) 2000-2003 MPlayer Team
>
>CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 2633 MHz (Family:
>6, Stepping: 1)
>Detected cache-line size is 64 bytes
>CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
>Reading config file /etc/mplayer/mplayer.conf: No such file or directory
>Reading config file /root/.mplayer/config
>Reading /root/.mplayer/codecs.conf: Can't open
>'/root/.mplayer/codecs.conf': No such file or directory
>Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf':
>No such file or directory
>Using built-in default codecs.conf.
>font: can't open file: /root/.mplayer/font/font.desc
>Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
>Using Linux hardware RTC timing (1024Hz).
>Can't open input config file /root/.mplayer/input.conf: No such file or
>directory
>Can't open input config file /etc/mplayer/input.conf: No such file or
>directory
>Falling back on default (hardcoded) input config
>Opening joystick device /dev/input/js0
>Can't open joystick device /dev/input/js0 : No such device
>Can't init input joystick
>Setting up LIRC support...
>mplayer: could not connect to socket
>mplayer: No such file or directory
>Failed to open LIRC support.
>You will not be able to use your remote control.
>
>Playing outtakes.mpg.
>MPEG-PS file format detected.
>VIDEO:  MPEG2  352x240  (aspect 2)  29.970 fps  9800.4 kbps (1225.0
>kbyte/s)
>==========================================================================
>Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
>MP3lib: init layer2&3 finished, tables done
>AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 28000->192000 (224.0 kbit)
>Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
>==========================================================================
>vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0" => local
>display)
>==========================================================================
>Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
>VDec: vo config request - 352 x 240 (preferred csp: Mpeg PES)
>Could not find matching colorspace - retrying with -vf scale...
>Opening video filter: [scale]
>The selected video_out device is incompatible with this codec.
>VDecoder init failed :(
>Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
>Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
>==========================================================================
>Checking audio filter chain for 48000Hz/2ch/16bit ->
>48000Hz/2ch/16bit...
>AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
>AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
>AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
>Building audio filter chain for 48000Hz/2ch/16bit ->
>48000Hz/2ch/16bit...
>Starting playback...
>VDec: vo config request - 352 x 256 (preferred csp: Planar YV12)
>VDec: using Planar YV12 as output csp (no 0)
>Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
>VO: [xv] 352x240 => 352x264 Planar YV12
>
>Program received signal SIGSEGV, Segmentation fault.
>[Switching to Thread -1085247360 (LWP 5748)]
>0x00686b42 in _int_malloc () from /lib/tls/libc.so.6
>(gdb) bt
>#0  0x00686b42 in _int_malloc () from /lib/tls/libc.so.6
>#1  0x00685e9d in malloc () from /lib/tls/libc.so.6
>#2  0x00795bc4 in XGetAtomName () from /usr/X11R6/lib/libX11.so.6
>#3  0x080a0a02 in vo_x11_check_events ()
>(gdb) quit
>The program is running.  Exit anyway? (y or n) y
>
>
>_______________________________________________
>MPlayer-users mailing list
>MPlayer-users at mplayerhq.hu
>http://mplayerhq.hu/mailman/listinfo/mplayer-users
>
>  
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3411 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.mplayerhq.hu/pipermail/mplayer-users/attachments/20040324/eac1aefe/attachment.bin>