[MPlayer-users] Re: why isn't school of rock 16x9?
Carl Karsten
carl at personnelware.com
Wed May 19 15:29:51 CEST 2004
> $ mplayer -fs dvd://1
> MPlayer dev-CVS-040513-09:31-3.3.2 (C) 2000-2004 MPlayer Team
>
> CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville 601.8 MHz (Family: 6,
> Stepping: 3)
> Detected cache-line size is 32 bytes
> CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> Compiled for x86 CPU with extensions: MMX MMX2 SSE
>
> Reading config file /usr/local/etc/mplayer/mplayer.conf
> Reading config file /home/carl/.mplayer/config
> Reading /home/carl/.mplayer/codecs.conf: Can't open
> '/home/carl/.mplayer/codecs.conf': No such file or directory
> Reading /usr/local/etc/mplayer/codecs.conf: Can't open
> '/usr/local/etc/mplayer/codecs.conf': No such file or directory
> Using built-in default codecs.conf.
> Font
>
/usr/local/share/mplayer/font/font-arial-iso-8859-1/font-arial-28-iso-8859-1/fon
> t.desc loaded successfully! (206 chars)
> Using Linux hardware RTC timing (1024Hz).
> Input config file /home/carl/.mplayer/input.conf parsed: 53 binds
>
> Playing dvd://1.
> Reading disc structure, please wait...
> There are 12 titles on this DVD.
> There are 18 chapters in this DVD title.
> There are 1 angles in this DVD title.
> DVD successfully opened.
> Selected DVD audio channel: 128 language: en
> Cache fill: 18.20% (2981888 bytes) MPEG-PS file format detected.
> VIDEO: MPEG2 720x480 (aspect 3) 29.970 fps 9800.0 kbps (1225.0 kbyte/s)
> ==========================================================================
> Opening audio decoder: [liba52] AC3 decoding with liba52
> Using SSE optimized IMDCT transform
> AC3: 5.1 (3f+2r+lfe) 48000 Hz 448.0 kbit/s
> Using MMX optimized resampler
> AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 56000->192000 (448.0 kbit)
> Selected audio codec: [a52] afm:liba52 (AC3-liba52)
> ==========================================================================
> vo: X11 running at 640x480 with depth 24 and 32 bpp (":0" => local display)
> ==========================================================================
> Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
> VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES)
> Could not find matching colorspace - retrying with -vf scale...
> Opening video filter: [scale]
> The selected video_out device is incompatible with this codec.
> VDecoder init failed :(
> Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.3.1
> Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2))
> ==========================================================================
> Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
> AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
> AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
> AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
> Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
> Starting playback...
> VDec: vo config request - 720 x 480 (preferred csp: Planar YV12)
> VDec: using Planar YV12 as output csp (no 0)
> Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
> VO: [xv] 720x480 => 854x480 Planar YV12 [fs]
> aspect: Warning: no suitable new res found!
> aspect: Warning: no suitable new res found!
> X11 error: BadDrawable (invalid Pixmap or Window parameter)
>
>
> MPlayer interrupted by signal 6 in module: vo_check_events
> - MPlayer crashed. This shouldn't happen.
> It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
> gcc version. If you think it's MPlayer's fault, please read
> DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
> won't help unless you provide this information when reporting a possible
bug.
>
Forgot the system info. here it is.
Using this script: (which could use some help)
cat /proc/cpuinfo
cat /etc/*release*
uname -a
ls -l /lib/libc[.-]*
gcc -v
ld -v
as --version
xdpyinfo | grep "depth of root"
lspci
dmesg
Here is the output:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Celeron (Coppermine)
stepping : 3
cpu MHz : 601.509
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
mmx fxsr sse
bogomips : 1187.84
Gentoo Base System version 1.4.10
Linux LinuxBook1 2.6.6-rc3-bk11 #6 Tue May 18 19:06:21 GMT 2004 i686 Celeron
(Coppermine) GenuineIntel GNU/Linux
-rwxr-xr-x 1 root root 1302844 Feb 19 12:06 /lib/libc-2.3.2.so
lrwxrwxrwx 1 root root 13 May 10 19:01 /lib/libc.so.6 ->
libc-2.3.2.so
Reading specs from /usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.2/specs
Configured with:
/var/tmp/portage/gcc-3.3.2-r5/work/gcc-3.3.2/configure --prefix=/usr --bindir=/u
sr/i686-pc-linux-gnu/gcc-bin/3.3 --includedir=/usr/lib/gcc-lib/i686-pc-linux-gnu
/3.3.2/include --datadir=/usr/share/gcc-data/i686-pc-linux-gnu/3.3 --mandir=/usr
/share/gcc-data/i686-pc-linux-gnu/3.3/man --infodir=/usr/share/gcc-data/i686-pc-
linux-gnu/3.3/info --enable-shared --host=i686-pc-linux-gnu --target=i686-pc-lin
ux-gnu --with-system-zlib --enable-languages=c,c++,f77,objc --enable-threads=pos
ix --enable-long-long --disable-checking --enable-cstdio=stdio --enable-clocale=
generic --enable-__cxa_atexit --enable-version-specific-runtime-libs --with-gxx-
include-dir=/usr/lib/gcc-lib/i686-pc-linux-gnu/3.3.2/include/g++-v3 --with-local
-prefix=/usr/local --enable-shared --enable-nls --without-included-gettext --dis
able-multilib
Thread model: posix
gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)
GNU ld version 2.14.90.0.7 20031029
GNU assembler 2.14.90.0.7 20031029
Copyright 2002 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License. This program has absolutely no warranty.
This assembler was configured for a target of `i686-pc-linux-gnu'.
depth of root window: 16 planes
0000:00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller
Hub] (rev 02)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics
Controller] (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AB PCI Bridge (rev 01)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AB ISA Bridge (LPC) (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801AB IDE (rev 01)
0000:00:1f.2 USB Controller: Intel Corp. 82801AB USB (rev 01)
0000:01:04.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet (rev 10)
0000:01:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
0000:01:05.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
Linux version 2.6.6-rc3-bk11 (root at LinuxBook1) (gcc version 3.3.2 20031218
(Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #6 Tue May 18 19:06:21 GMT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ff00000 (usable)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65280
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61184 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=6
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 601.509 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x60
Memory: 255332k/261120k available (1811k kernel code, 5048k reserved, 595k data,
336k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1187.84 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 601.0280 MHz.
..... host bus clock speed is 66.0808 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2420] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:01.0
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
udf: registering filesystem
Initializing Cryptographic API
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i810 Chipset.
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH0: IDE controller at PCI slot 0000:00:1f.1
ICH0: chipset revision 1
ICH0: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
hda: WDC WD307AA-00BAA0, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=59598/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdb: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device hda3, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 336k freed
Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
eth0: Davicom DM9102 at pci0000:01:04.0, 00:d0:09:1d:51:13, irq 11.
PCI: Found IRQ 11 for device 0000:00:01.0
I810FB: fb0 : Intel(R) 810 Framebuffer Device v0.9.0
I810FB: Video RAM : 16384K
I810FB: Monitor : H: 29-30 KHz V: 60-60 Hz
I810FB: Mode : 640x480-8bpp at 60Hz
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12
nfs warning: mount version older than kernel
[drm] Initialized i810 1.4.0 20030605 on minor 0
mtrr: base(0xd0000000) is not aligned on a size(0x12c000) boundary
[drm] Using v1.4 init.
PCI: Found IRQ 11 for device 0000:00:01.0
[drm] DMA Cleanup
mtrr: base(0xd0000000) is not aligned on a size(0x12c000) boundary
[drm] Using v1.4 init.
PCI: Found IRQ 11 for device 0000:00:01.0
[drm] DMA Cleanup
mtrr: base(0xd0000000) is not aligned on a size(0x12c000) boundary
[drm] Using v1.4 init.
PCI: Found IRQ 11 for device 0000:00:01.0
[drm] DMA Cleanup
mtrr: base(0xd0000000) is not aligned on a size(0x12c000) boundary
[drm] Using v1.4 init.
PCI: Found IRQ 11 for device 0000:00:01.0
[drm] DMA Cleanup
mtrr: base(0xd0000000) is not aligned on a size(0x12c000) boundary
[drm] Using v1.4 init.
PCI: Found IRQ 11 for device 0000:00:01.0
Carl K
More information about the MPlayer-users
mailing list